Team:Evry/Notebook/Protocols

From 2014.igem.org

Revision as of 00:43, 18 October 2014 by NoémieBC (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

IGEM Evry 2014

Notebook - Protocols

Primers



RNA isolation (using TRI Reagent)



Before :

-Cleaning everything with RNA zap
-Switch on centrifuge for a fast cool at 4C
*Preparation of stabilisation buffer :
Add to 15 mL facon tube :
- 5ml Phenol
- 5ml 1M sodium acetate pH=5.5
Centrifuge 3 min, 4k rpm
Tranfer lower phase (contains phenol) to 50 mL falcon
Transfer 2.5mL to second falcon (devide into 2 tubes)
Add 45mL 100% ethanol to each tube
*Preparation of the samples
measurement of OD
if log phase, centrifugation of culture
Discard the supernatant
*Stabilization of samples
Add 1.25mL stabilization buffer to 10ml log phase culture
Put culture on ice
Vortex
Transfer into 15 ml falcon tube
Spin 4k rpm , 5 min
Discard supernatant
resuspend pellet in 1ml TRI Reagent
transfer to 2 ml eppie
incubate 5 min at RT
add 200µL chloroform
vortex 15 sec
incubate 15min at RT
Spin 12K rpm, 15min, 4C
transfer clear, aqueous phase (upper phase) to fresh tube
add 500µL isopropanol
vortex 5 sec
incubate 10' at RT
spin 14 000, 10 mn, 4C
carrefully pout off supernatant
add 1 mL 75% ethanol
spin 14000 rpm, 5min 4C
discard ethanol
air dry pellet 30 min
Put 93µL RNAse free water
Verification on an electrophoresis gel (caution: preparation of electrophoresis gel with TBE or TAE RNAse Free agarose 1%)
Measuring quantity of RNA with nanodrop

Turbo DNAse protocol of RNA

Dilute sample to 200ng/µL in 100µL (20µg total)
Add 10µL 10X DNAse buffer
Add 2µL turbo Dnase (2U/µL)
Incubate at 37C, 30min
*Phenol-Chloroform extraction
Ajust the volume of this sample at 200µL
Add 1 volume of phonol:chloroform:isomyl alcohol
Vortex
spin 14K , 5min, 4C
Transfer upper , aqueous phase to fresh tube
Verification on an electrophoresis gel (if DNA IS ALWAYS present, do again the step of Turbo DNAse treatment)
*Protocol for ethanol/acetate precipitation of RNA
if small volume, bring to 180µL with RNAse-free water
add 0.1 volume 5M ammonium acetate or 3M sodium acetate
(optional) add 2µL of 5µg/µL glycogen if RNA is < 200µg/µL
add 2.5-3 volumes 100% ethanol
put at -20C o/n or -80C for 30min
13K, 30min, 4C
carrefully discard supernatant
add 1ml ice cold 70% ethanol
13K, 10min, 4C
discard ethanol air dry 10min
Resuspend RNA in RNAse-free water(max 18µL)
Verification on an electrophoresis gel

*Nanodrop

*RNAship

DNA extraction



Use of the kit GenElute™ Bacterial Genomic DNA Kit Protocol (NA2100, NA2110, NA2120), Sigma Aldrich
(link here)

Transformation of Pseudovibrio

  • Place electroporation tanks in ice for 10min
  • Take samples of plasmids (25ng-50ng/µL) /!\ Keep them in ice /!\
  • Take sample of competent cells /!\ Keep them in ice /!\
  • Place 1µL of plasmid in the sample of competent cells
  • Transfer the full volume obtained in the electroporation tank
  • Place in the electroporator and pulse at 2000V
  • NB: The optimal pulse length is between 5 and 6ms.
  • Add 1mL of MB 1X in the 30 seconds following the transformation
  • Incubate between 2h and 3h at 30°C with shaking
  • Centrifuge to concentrate all cells in the pellet
  • Discard the supernatant
  • Sowed the pellet on selective plates of MB 1X

Electro-competent Pseudovibrio in Marine broth



Reagents and Materials

* Refrigerated centrifuge (4°C)
* Marine Broth 1X
*Cold glycerol 10% (4°C)

Experimental procedure

-Make a pre-culture of Pseudovibrio in 3mL of MB 1X and let it incubate overnight at 30°C with shaking.

-Relaunch the Pseudovibrio culture in 100mL of MB 1X.
-Let it grow in a 30°C shaking incubator until DO (600nm) = 1.2
-Divide the culture into two 50mL Falcon tubes.
-Wash cells with cold glycerol 10% five times
(Centrifuge at 4000g, 4°C for 10min and re-suspend):
* 50 mL (x 1)
* 25 mL (x 1)
* 5 mL (x 3)
-Re-suspend a last time washed cells in 500µL of glycerol 10%.
-Aliquot 50µL of competent cells and stock them at -80°C for maximum three weeks.

Electro-competent Pseudovibrio in M9-CASA +3%NaCl



Reagents and Materials

* Refrigerated centrifuge (4°C)
* M9-CASA+3%NaCl 1X
*Cold glycerol 10% (4°C)
*Cold sorbitol 2% (4°C)

Experimental procedure

-Make a pre-culture of Pseudovibrio in 3mL of M9-CASA+3%NaCl 1X and let it incubate overnight at 30°C with shaking.

-Relaunch the Pseudovibrio culture in 100mL of M9-CASA+3%NaCl 1X.
-Let it grow in a 30°C shaking incubator until DO (600nm) = 1.2
-Divide the culture into two 50mL Falcon tubes.
-Wash cells with cold glycerol or cold sorbitol three times
(Centrifuge at 4000g, 4°C for 10min and re-suspend):
* 50 mL (x 1)
* 25 mL (x 1)
* 5 mL (x 1)
-Re-suspend a last time washed cells in 500µL of glycerol 10%.
-Aliquot 50µL of competent cells and stock them at -80°C for maximum three weeks.

Marine broth



Composition of the medium:

text to print if image not found

After having put the wished volume of water, put 40.2g/L of the medium powder.
Dissolve sediments by warming the mixture.
Boil during one entiere minute
Autoclave the medium during 15min at 250°F.


M9 - CASA +3%NaCl



Composition of the medium:

text to print if image not found

After add correspondant quantity of the different compounds in the wished volume of water, filtrate the entiere volume obtained.
NB: This medium can't be autoclaved contain glucose and amino acids.

Preparation of antibiotic stocks

Antibiotic Stock concentration Protocol
Kanamycin 25 mg/mL Weight 0.56g of Kanamycin powder, solubilization into 20mL of miliQ water.
Vortex 5min and filtration with a 200nm filter.
Stock : -20°C (aliquots of 1mL)

Streptomycin 100 mg/mL Weight 1g of Streptomycin powder, solubilization into 20mL of miliQ water.
Vortex 5min and filtration with a 200nm filter.
Stock : -20°C (aliquots of 1mL)

Amplicilin 100 mg/mL Weight 1g of Amplicilin powder, solubilization into 20mL of miliQ water.
Vortex 5min and filtration with a 200nm filter.
Stock : -20°C (aliquots of 1mL)

Tetracyclin 15 mg/mL Weight 0.6g of Tetracyclin powder, solubilization into 20mL of ethanol 50%.
Vortex 5min and filtration with a 200nm filter.
Stock : -20°C and hiden from light(aliquots of 1mL)

Chloramphenicol 34 mg/mL Weight 0.34g of Chloramphenicol powder, solubilization into 10mL of ethanol 100%.
Vortex 5min and filtration with a 200nm filter.
Stock : -20°C and hiden from light(aliquots of 1mL)