"

From 2014.igem.org

Home	Project	Team	Policy & Practice	Protocols	Safety

Background

Bacterial Cellulose

Bacterial cellulose (BC) is an extracellular product of a number number of species of bacteria, however the most common methods of BC production rely on a select few species of the Acetobacteraceae family (Legge, 1990). Unlike the cellulose found in plant tissue such as wood or cotton, BC has a very high crystalinity due to the lack of impurities such as the lignin and hemicellulose produced in plant tissues (Valla et al., 2009).

Bacterial cellulose is formed of extruded fibrils of cellulose which are produced in a trail-like fashion by the bacteria (see Figure 1)(Chawla and Bajaj, 2009). These fibrils are interwoven and organised randomly, producing macro-scale sheets without a directional "grain". As a result, sheets of bacterial cellulose are mechanically strong allowing. Additionally, BC is biocompatible and has been shown to promote mammalian cell proliferation effectively without inducing significant pro-inflammatory cytokine production. This has lead to interest in using BC as a scaffold for grafting, in vitro 3D cell culture, or mammalian tissue growth (Keshk, 2014).

[Figure1 - chawlabajajfigure]

G. hansenii

Gluconacetoabacter hansenii (LMG1524, ATCC 23769), previously classified as Acetobacter xylinum is an alphaproteobacter originally isolated from vinegar which is well studied for its production of bacterial cellulose. G. hansenii is a model organism for the study of bacterial cellulose production and like other BC producing bacteria, G. hansenii, manufactures extracellular cellulose in a thin layer at the air-medium interface of a liquid medium.

G. hansenii has been used in numerous studies relating to bacterial cellulose production and has an fully sequenced genome (Iyer et al., 2010). We are using G. hansenii over the related G. xylinus, a more prodigious producer of BC, due to the more complete genomic and metabolic information available. G. hansenii will therefore provide our starting point for the production of a light sensitive extracellular cellulose producing organism for use in our light based 3D cellulose printer: JuicyPrint.

3D Printing

3D printing is a technology which has started to become a common place tool for a large range of engineering or fabrication projects. This is largely due to the open source movement producing software and hardware that is easy to use without the need for extensive training. Current 3D printers allow the rapid design and production of high quality 3-dimensional objects made of a broad range of materials.

JuicyPrint hopes to follow in the model of successful opensource 3D printer projects such as RepRap which are designed to be constructed from easily available generic parts and, where that is not possible, from parts that can be produced from a pre-existing unit.

Our project is inspired by photosensitive resin 3D printers which utilise a liquid resin that can be cured with exposure to intense light. In these printers, the object to be printed is built layer by layer through the projection of a pattern of light onto the photosensitive resin's surface. This cures a thin layer of resin in a corresponding pattern to that of the projected light which adheres to the previous layer. By altering the pattern of projected light for each layer, intricate 3-dimensional objects can therefore be built out of resin.

In our printer 3D printer JuicyPrint, light sensitive G. hansenii produces a macro-scale layer of extracellular cellulose at the surface of the liquid medium. As with the photosensitive resin printer, we control the pattern of the forming layer of solid material using a projected pattern of light. The major differences between JuicyPrint and photosensitive resin printers are: 3D structures created are formed of gelatinous bacterial cellulose rather than rigid resin the process of converting the liquid feedstock into structural material relies on biological signal transduction and metabolism rather than a rapid chemical change

Genetics of Engineered Light Sensitivity

Our project relies on previous contributions to the iGEM Registry of Standard Biological parts in order to engineer a light sensitive transcription pathway into bacteria. This pathway, developed by Levskaya et al. (2005), is based on the well characterised EnvZ-OmpR two-component signal transduction system found in E. coli. The modified pathway replaces the naturally present EnvZ osmolarity sensor with an engineered protein Cph8, a fusion of the light responsive domain of Cph1 (a cyanobacterial phytochrome ) and the histidine kinase domain of EnvZ. This allows light mediated transcription of genes promoted by the ompC promoter (ompCp).

The Cph8 signal transduction pathway is a simple pathway which has been used in numerous iGEM projects to introduce light sensitivity to bacteria (e.g. E.colightuner, Communicating Through Bridges). This pathway forms the basis of introducing light mediated extracellular cellulose production into G. hansenii in our project.

Table 1 gives an overview of the genes involved in the light sensitive signal transduction system.

[table 1 = hack.rs table w/o dgc1]

Genetics of Cellulose Production in G. hansenii

A number of the core genes involved in extracellular cellulose production in G. hansenii have recently been characterised using transposon mutagenesis (Deng et al., 2013). Of these genes, dgc1 is a primary candidate for use as a genetic switch for controlling the production of extracellular cellulose. dgc1 encodes diguanylate cyclase (Dgc) which is necessary for the production of extracellular cellulose in G. hansenii - dgc1 knockout mutants of G. hansenii do not produce extracellular cellulose. Dgc catalyses the formation of c-di-GMP which is known to regulate biofilm formation, motility, and the production of extracellular polysaccharides (Römling and Amikam, 2006).

References

Chawla, P., Bajaj, I., 2009. Microbial cellulose: Fermentative production and applications. Food Technology and … 47, 107–124.

Deng, Y., Nagachar, N., Xiao, C., Tien, M., Kao, T.-H., 2013. Identification and Characterization of Non-Cellulose-Producing Mutants of Gluconacetobacter hansenii Generated by Tn5 Transposon Mutagenesis. Journal of bacteriology. doi:10.1128/JB.00767-13

Iyer, P.R., Geib, S.M., Catchmark, J., Kao, T., Tien, M., 2010. Genome sequence of a cellulose-producing bacterium, Gluconacetobacter hansenii ATCC 23769. Journal of bacteriology 192, 4256–7. doi:10.1128/JB.00588-10

Keshk, S.M., 2014. Bacterial Cellulose Production and its Industrial Applications. Journal of Bioprocessing & Biotechniques 04. doi:10.4172/2155-9821.1000150

Legge, R.L., 1990. Microbial cellulose as a speciality chemical. Biotechnology Advances 8, 303–319. doi:10.1016/0734-9750(90)91067-Q

Levskaya, A., Chevalier, A.A., Tabor, J.J., Simpson, Z.B., Lavery, L.A., Levy, M., Davidson, E.A., Scouras, A., Ellington, A.D., Marcotte, E.M., Voigt, C.A., 2005. Synthetic biology: engineering Escherichia coli to see light. Nature 438, 441–442. doi:10.1038/nature04405

Römling, U., Amikam, D., 2006. Cyclic di-GMP as a second messenger. Curr. Opin. Microbiol. 9, 218–228. doi:10.1016/j.mib.2006.02.010

Valla, S., Ertesvåg, H., Tonouchi, N., Fjærvik, E., 2009. Bacterial cellulose production: biosynthesis and applications, in: Rehm, B.H.A. (Ed.), . Caister Academic Press, Norfolk, UK, pp. 43–77.