"
Team:London BioHackspace/Printer Hardware
From 2014.igem.org
(→Intro) |
(→Aim) |
||
| Line 17: | Line 17: | ||
==Aim== | ==Aim== | ||
| - | The aim is to provide a basic proof of concept | + | The primary aim is to demonstrate a mechanical system which can be used to provide a light source and as a basic proof of concept. |
Revision as of 00:34, 18 October 2014
| Home | Project | Team | Policy & Practice | Protocols | Safety |  |
Contents |
Intro
The basic proposal for juicyprint is the growth of cellulose by bacteria under the control of light. The 660nm light that the Cph1 protein is sensitive to inhibits the growth. Therefore we designed a system to generate the production of a pellicle sheet in the shape of a projected template of the negative image.
| So a light pattern like this | should result in a pellicle growth pattern like this |
| 
|
Aim
The primary aim is to demonstrate a mechanical system which can be used to provide a light source and as a basic proof of concept.
 |
 |
 |
 |
Methods
We were unable to fully test the system with the target system. Therefore we simulated the process with just a liquid target.
660nm light is a bright red colour;
Image courtesy of Beer Color Laboratories;
http://www.beercolor.com/color_basics1.htm
Results
A thick 660nm camera filter gets very hot when placed near the projector for a period of time.
Therefore I settled on using a home-made red permanent marker pen to make a 35mm slide suitable for projection. The slide was much thinner and didn't absorb so much light and get hot.
