Team:CSU Fort Collins/Notebook/Protocols=Gel

From 2014.igem.org

Revision as of 16:22, 9 October 2014 by Ossmith (Talk | contribs)

CSU iGEM 2014

Gel Electrophoresis Protocol

Show Table of Contents

  1. Using a balance, mass out 1.0 gram of agarose. Mix this with 100 MICROL of TAE 1X Buffer.
  2. Microwave the mixture, mixing intermittently, until all the agarose is dissolved and the mixture is homogeneous.
  3. Pour the mixture into a gel plate and insert an 8-lane comb. Allow to cool and solidify in the fridge or on the benchtop
  4. Mix your samples to run in the gel. Use 10 MICROL of the DNA Ladder combined with 2 MICROL SYBR Green in the first lane and for all samples, mix 5 MICROL of sample with 5 MICROL of nuclease-free water and 2 MICROL of SYBR Green/Dye Mixture.
  5. Place gel in tray into the gel electrophoresis apparatus; Wells should be located towards the negative (conventionally black) end. Fill apparatus with 1X TAE until the gel is completely submerged. Do not overfill.
  6. Load 10 MICROL of each sample into the appropriate wells.
  7. Connect wiring and run gel electrophoresis for 1 hour.
  8. Analyze gel in UV light and see if samples match the expected size using the ladder as a guide.



Previous Next