Team:Bielefeld-CeBiTec/HumanPractice/Synenergene/Applications

From 2014.igem.org

(Difference between revisions)
Line 70: Line 70:
Our system relies on a fermenter in which bacteria grow by using electricity. The growth should be enhanced through the gain of reduction equivalents.<br>
Our system relies on a fermenter in which bacteria grow by using electricity. The growth should be enhanced through the gain of reduction equivalents.<br>
One application type we think of is the stationary application. With stationary application the size of the fermenter can be increased and the volume of generated product increases too. It makes sense to use sites where an surplus of energy arises. For example we are thinking of an application at wind power stations. Some of the produced energy could be used directly to produce more energy by the wind power station. It makes sense to hold the fermenter in operating state the whole time because there are some moments when the amount of surplus is very high. The problem is that the produced energy has a voltage of 10-30kV. To reduce the voltage transistors has to be built for each fermenter. The costs of this project will exceed each limit. A further development of this idea is to place our fermenter at electric power transformation substations. The needed transistors are already installed. The incoming regenerative energy would be used as the energy for the fermenter. A problem therefor is that we need continuous current for fermentation which is produced at the wind power engine but immediately transformed into alternating current.<br>
One application type we think of is the stationary application. With stationary application the size of the fermenter can be increased and the volume of generated product increases too. It makes sense to use sites where an surplus of energy arises. For example we are thinking of an application at wind power stations. Some of the produced energy could be used directly to produce more energy by the wind power station. It makes sense to hold the fermenter in operating state the whole time because there are some moments when the amount of surplus is very high. The problem is that the produced energy has a voltage of 10-30kV. To reduce the voltage transistors has to be built for each fermenter. The costs of this project will exceed each limit. A further development of this idea is to place our fermenter at electric power transformation substations. The needed transistors are already installed. The incoming regenerative energy would be used as the energy for the fermenter. A problem therefor is that we need continuous current for fermentation which is produced at the wind power engine but immediately transformed into alternating current.<br>
-
The availability of energy through regenerative sources varies. The energy from regenerative sources in Bielefeld is never down regulated while regulation at coast regions is more common. We got insights into the load profile of a wind power engine of Bielefeld by <a href="#SWB">SWB Netz GmbH</a>. The load profile showed a high variance throughout a day, a month, a season or even a year. This led to the idea to use small wind energy power engines. They have a height of 15-30 meters which results in a high sound annoyance. Until now they lack in a real application. Maybe they are a plausible base for our fermentation system.</p>
+
The availability of energy through regenerative sources varies. The energy from regenerative sources in Bielefeld is never down regulated while regulation at coast regions is more common. We got insights into the load profile of a wind power engine of Bielefeld by <a href="#SWB">SWB Netz GmbH</a>.
 +
 
 +
<div class="element" style="margin:10px; padding:10px; text-align:center">
 +
      <a href="https://static.igem.org/mediawiki/2014/f/fb/Bielefeld-CeBiTec_2014-10-15_SeasonalWindLoadProfile.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/f/fb/Bielefeld-CeBiTec_2014-10-15_SeasonalWindLoadProfile.png" width="750px"></a><br>
 +
      <font size="1" style="text-align:center;">fig. 4: Seasonal load profile of a Bielefeld wind power engine</font>
 +
    </div>
 +
 
 +
The load profile showed a high variance throughout a day, a month, a season or even a year. This led to the idea to use small wind energy power engines. They have a height of 15-30 meters which results in a high sound annoyance. Until now they lack in a real application. Maybe they are a plausible base for our fermentation system.</p>
<br>
<br>
<div class="element" style="margin:10px; padding:10px; text-align:center; float:right">  
<div class="element" style="margin:10px; padding:10px; text-align:center; float:right">  
       <a href="https://static.igem.org/mediawiki/2014/b/b7/Bielefeld-CeBiTec_2014-09-29_Fig._13_-_Szen_Haus.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/b/b7/Bielefeld-CeBiTec_2014-09-29_Fig._13_-_Szen_Haus.png" width="250px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/b/b7/Bielefeld-CeBiTec_2014-09-29_Fig._13_-_Szen_Haus.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/b/b7/Bielefeld-CeBiTec_2014-09-29_Fig._13_-_Szen_Haus.png" width="250px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 4: Scenario for house</font>
+
       <font size="1" style="text-align:center;">fig. 5: Scenario for house</font>
     </div>
     </div>
<p>A second application scenario is to install our fermenter at anybody’s home. Many houses already produce regenerative energy through photovoltaic panels on the roofs. The problem of this production is that the whole amount of produced energy cannot be used by the occupants itself. Most of the energy will be delivered to electric power transformation substations. It would make sense to store the energy at home where it is produced. Therefor the fermenter would be placed in the cellar. The produced isobutanol could be extracted and stored. Applications for the isobutanol at home could be various. For example it could be added to electric machines like lawn-movers or used as an addition for the fuel of the car. Additionally isobutanol might be used as a heating substance.</p>
<p>A second application scenario is to install our fermenter at anybody’s home. Many houses already produce regenerative energy through photovoltaic panels on the roofs. The problem of this production is that the whole amount of produced energy cannot be used by the occupants itself. Most of the energy will be delivered to electric power transformation substations. It would make sense to store the energy at home where it is produced. Therefor the fermenter would be placed in the cellar. The produced isobutanol could be extracted and stored. Applications for the isobutanol at home could be various. For example it could be added to electric machines like lawn-movers or used as an addition for the fuel of the car. Additionally isobutanol might be used as a heating substance.</p>
Line 80: Line 87:
<div class="element" style="margin:10px; padding:10px; text-align:center; float:right">  
<div class="element" style="margin:10px; padding:10px; text-align:center; float:right">  
       <a href="https://static.igem.org/mediawiki/2014/b/b3/Bielefeld-CeBiTec_2014-08-31_Fig._8_-_Szen_Industrie.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/b/b3/Bielefeld-CeBiTec_2014-08-31_Fig._8_-_Szen_Industrie.png" width="250px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/b/b3/Bielefeld-CeBiTec_2014-08-31_Fig._8_-_Szen_Industrie.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/b/b3/Bielefeld-CeBiTec_2014-08-31_Fig._8_-_Szen_Industrie.png" width="250px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 5: Scenario for industry</font>
+
       <font size="1" style="text-align:center;">fig. 6: Scenario for industry</font>
     </div>
     </div>
<p>The third application for stationary application would be at industrial production sites where isobutanol is needed. The fermenter would be placed directly on the premises. Photovoltaics would feed the bacteria in the fermenter which generate isobutanol for the productions of the company. An example production site would be a varnish producer. We got in contact with the <a href="#Eckart">Eckart GmbH, a member of Altana</a>. They told us that they do not use isobutanol for production of pigments and others but butanol is a often mentioned theme for discussion.</p>
<p>The third application for stationary application would be at industrial production sites where isobutanol is needed. The fermenter would be placed directly on the premises. Photovoltaics would feed the bacteria in the fermenter which generate isobutanol for the productions of the company. An example production site would be a varnish producer. We got in contact with the <a href="#Eckart">Eckart GmbH, a member of Altana</a>. They told us that they do not use isobutanol for production of pigments and others but butanol is a often mentioned theme for discussion.</p>
Line 91: Line 98:
<div class="element" style="margin:10px; padding:10px; text-align:center">  
<div class="element" style="margin:10px; padding:10px; text-align:center">  
       <a href="https://static.igem.org/mediawiki/2014/8/8e/Bielefeld_CeBiTec_2014-09-29_windengine-number.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/8/8e/Bielefeld_CeBiTec_2014-09-29_windengine-number.png" width="750px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/8/8e/Bielefeld_CeBiTec_2014-09-29_windengine-number.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/8/8e/Bielefeld_CeBiTec_2014-09-29_windengine-number.png" width="750px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 6: Development of wind engines from 1993 to 2014</font>
+
       <font size="1" style="text-align:center;">fig. 7: Development of wind engines from 1993 to 2014</font>
     </div>
     </div>
It has to be noted that the typical location of wind power stations shifted because of the technology development.<br>
It has to be noted that the typical location of wind power stations shifted because of the technology development.<br>
<div class="element" style="margin:10px; padding:10px; text-align:center">  
<div class="element" style="margin:10px; padding:10px; text-align:center">  
       <a href="https://static.igem.org/mediawiki/2014/9/9b/Bielefeld-CeBiTec_2014-09-29_Windengine-shift.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/9/9b/Bielefeld-CeBiTec_2014-09-29_Windengine-shift.png" width="550px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/9/9b/Bielefeld-CeBiTec_2014-09-29_Windengine-shift.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/9/9b/Bielefeld-CeBiTec_2014-09-29_Windengine-shift.png" width="550px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 7: Distribution of the Germany-wide Cumulative Capacity across the Regions, Status: 31 December 2013 (www.windguard.de)
+
       <font size="1" style="text-align:center;">fig. 8: Distribution of the Germany-wide Cumulative Capacity across the Regions, Status: 31 December 2013 (www.windguard.de)
</font>
</font>
     </div>
     </div>
Line 102: Line 109:
<div class="element" style="margin:10px; padding:10px; text-align:center">  
<div class="element" style="margin:10px; padding:10px; text-align:center">  
       <a href="https://static.igem.org/mediawiki/2014/9/9a/Bielefeld-CeBiTec_2014-09-29_windengine-capacity.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/9/9a/Bielefeld-CeBiTec_2014-09-29_windengine-capacity.png" width="550px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/9/9a/Bielefeld-CeBiTec_2014-09-29_windengine-capacity.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/9/9a/Bielefeld-CeBiTec_2014-09-29_windengine-capacity.png" width="550px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 8: Development of the Average Capacity of Land-based WTG’s Erected and Cumulatively Present in the Turbine Portfolio in Germany, Status: 31 December 2013 (www.windguard.de)</font>
+
       <font size="1" style="text-align:center;">fig. 9: Development of the Average Capacity of Land-based WTG’s Erected and Cumulatively Present in the Turbine Portfolio in Germany, Status: 31 December 2013 (www.windguard.de)</font>
     </div>
     </div>
<br>
<br>
<div class="element" style="margin:10px; padding:10px; text-align:center">  
<div class="element" style="margin:10px; padding:10px; text-align:center">  
       <a href="https://static.igem.org/mediawiki/2014/f/fc/Bielefeld-CeBiTec_2014-09-29_windengine-cumulative-capacity.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/f/fc/Bielefeld-CeBiTec_2014-09-29_windengine-cumulative-capacity.png" width="550px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/f/fc/Bielefeld-CeBiTec_2014-09-29_windengine-cumulative-capacity.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/f/fc/Bielefeld-CeBiTec_2014-09-29_windengine-cumulative-capacity.png" width="550px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 9: Development of the Annual Installed and Cumulative Capacity (MW) from Land-based Wind Energy in Germany, Status: 31 December 2013 (www.windguard.de)</font>
+
       <font size="1" style="text-align:center;">fig. 10: Development of the Annual Installed and Cumulative Capacity (MW) from Land-based Wind Energy in Germany, Status: 31 December 2013 (www.windguard.de)</font>
     </div>
     </div>
For the future several plans were made to invest more time and money in wind power stations. The building of offshore wind parks will hardly increase in the next years which results in an increase of available energy.<br>
For the future several plans were made to invest more time and money in wind power stations. The building of offshore wind parks will hardly increase in the next years which results in an increase of available energy.<br>
Line 113: Line 120:
<div class="element" style="margin:10px; padding:10px; text-align:center">  
<div class="element" style="margin:10px; padding:10px; text-align:center">  
       <a href="https://static.igem.org/mediawiki/2014/2/2d/Bielefeld-CeBiTec_2014-09-29_windengine-states.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/2/2d/Bielefeld-CeBiTec_2014-09-29_windengine-states.png" width="550px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/2/2d/Bielefeld-CeBiTec_2014-09-29_windengine-states.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/2/2d/Bielefeld-CeBiTec_2014-09-29_windengine-states.png" width="550px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 10: Addition to Wind Energy in the German States, Status: 31 December 2013 (www.windguard.de)
+
       <font size="1" style="text-align:center;">fig. 11: Addition to Wind Energy in the German States, Status: 31 December 2013 (www.windguard.de)
</font>
</font>
     </div>
     </div>
Line 140: Line 147:
<div class="element" style="margin:10px; padding:10px; text-align:center">  
<div class="element" style="margin:10px; padding:10px; text-align:center">  
       <a href="https://static.igem.org/mediawiki/2014/1/1b/Bielefeld-CeBiTec_2014-09-29_GreenhouseGas.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/1/1b/Bielefeld-CeBiTec_2014-09-29_GreenhouseGas.png" width="550px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/1/1b/Bielefeld-CeBiTec_2014-09-29_GreenhouseGas.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/1/1b/Bielefeld-CeBiTec_2014-09-29_GreenhouseGas.png" width="550px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 11: Greenhouse gas CO<sub>2</sub> emission worldwide. (<a href="#CO2Emission">Wikipedia</a>)</font>
+
       <font size="1" style="text-align:center;">fig. 12: Greenhouse gas CO<sub>2</sub> emission worldwide. (<a href="#CO2Emission">Wikipedia</a>)</font>
     </div>
     </div>
<br>
<br>
Line 151: Line 158:
<div class="element" style="margin:10px; padding:10px; text-align:center; float:right">  
<div class="element" style="margin:10px; padding:10px; text-align:center; float:right">  
       <a href="https://static.igem.org/mediawiki/2014/3/3c/Bielefeld-CeBiTec_2014-09-29_Fig._14_-_Szen_CCS.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/3/3c/Bielefeld-CeBiTec_2014-09-29_Fig._14_-_Szen_CCS.png" width="250px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/3/3c/Bielefeld-CeBiTec_2014-09-29_Fig._14_-_Szen_CCS.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/3/3c/Bielefeld-CeBiTec_2014-09-29_Fig._14_-_Szen_CCS.png" width="250px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 12: Scenario for CCS technology</font>
+
       <font size="1" style="text-align:center;">fig. 13: Scenario for CCS technology</font>
     </div>
     </div>
</td>
</td>
Line 159: Line 166:
<div class="element" style="margin:10px; padding:10px; text-align:center; float:right">  
<div class="element" style="margin:10px; padding:10px; text-align:center; float:right">  
       <a href="https://static.igem.org/mediawiki/2014/b/b3/Bielefeld-CeBiTec_2014-08-31_Fig._8_-_Szen_Industrie.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/b/b3/Bielefeld-CeBiTec_2014-08-31_Fig._8_-_Szen_Industrie.png" width="250px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/b/b3/Bielefeld-CeBiTec_2014-08-31_Fig._8_-_Szen_Industrie.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/b/b3/Bielefeld-CeBiTec_2014-08-31_Fig._8_-_Szen_Industrie.png" width="250px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 13: Scenario for industry</font>
+
       <font size="1" style="text-align:center;">fig. 14: Scenario for industry</font>
     </div>
     </div>
</td>
</td>
Line 175: Line 182:
<div class="element" style="margin:10px; padding:10px; text-align:center">  
<div class="element" style="margin:10px; padding:10px; text-align:center">  
       <a href="https://static.igem.org/mediawiki/2014/2/27/Bielefeld_CeBiTec_2014-09-30_CCS-sectors.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/2/27/Bielefeld_CeBiTec_2014-09-30_CCS-sectors.png" width="550px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/2/27/Bielefeld_CeBiTec_2014-09-30_CCS-sectors.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/2/27/Bielefeld_CeBiTec_2014-09-30_CCS-sectors.png" width="550px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 14: CO<sub>2</sub> captured in 2050 by sector (<a href="#IEA">IEA</a>)</font>
+
       <font size="1" style="text-align:center;">fig. 15: CO<sub>2</sub> captured in 2050 by sector (<a href="#IEA">IEA</a>)</font>
     </div>
     </div>
<br>
<br>
Line 181: Line 188:
<div class="element" style="margin:10px; padding:10px; text-align:center">  
<div class="element" style="margin:10px; padding:10px; text-align:center">  
       <a href="https://static.igem.org/mediawiki/2014/f/fc/Bielefeld_CeBiTec_2014-09-30_CCS-total.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/f/fc/Bielefeld_CeBiTec_2014-09-30_CCS-total.png" width="550px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/f/fc/Bielefeld_CeBiTec_2014-09-30_CCS-total.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/f/fc/Bielefeld_CeBiTec_2014-09-30_CCS-total.png" width="550px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 15: Global development of CCS 2010 - 2050 (<a href="#IEA">IEA</a>)</font>
+
       <font size="1" style="text-align:center;">fig. 16: Global development of CCS 2010 - 2050 (<a href="#IEA">IEA</a>)</font>
     </div>
     </div>
<p>These statistics show that the CCS technology seem a feasible development throughout the next years. By adding our fermentation system, bound carbon dioxide could by efficiently used by converting it to isobutanol. The advantage is that this kind of carbon source will not deplete in the next years because the amount of emitted carbon dioxide is high.</p>
<p>These statistics show that the CCS technology seem a feasible development throughout the next years. By adding our fermentation system, bound carbon dioxide could by efficiently used by converting it to isobutanol. The advantage is that this kind of carbon source will not deplete in the next years because the amount of emitted carbon dioxide is high.</p>
Line 215: Line 222:
<div class="element" style="margin:10px; padding:10px; text-align:center; float:right">  
<div class="element" style="margin:10px; padding:10px; text-align:center; float:right">  
       <a href="https://static.igem.org/mediawiki/2014/8/88/Bielefeld-CeBiTec_2014-08-31_Fig._5_-_Szen_Auto.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/8/88/Bielefeld-CeBiTec_2014-08-31_Fig._5_-_Szen_Auto.png" width="250px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/8/88/Bielefeld-CeBiTec_2014-08-31_Fig._5_-_Szen_Auto.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/8/88/Bielefeld-CeBiTec_2014-08-31_Fig._5_-_Szen_Auto.png" width="250px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 16: Scenario for car design</font>
+
       <font size="1" style="text-align:center;">fig. 17: Scenario for car design</font>
     </div>
     </div>
</td>
</td>
Line 223: Line 230:
<div class="element" style="margin:10px; padding:10px; text-align:center; float:right">  
<div class="element" style="margin:10px; padding:10px; text-align:center; float:right">  
       <a href="https://static.igem.org/mediawiki/2014/c/cc/Bielefeld-CeBiTec_2014-08-31_Fig._6_-_Szen_Schiff.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/c/cc/Bielefeld-CeBiTec_2014-08-31_Fig._6_-_Szen_Schiff.png" width="250px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/c/cc/Bielefeld-CeBiTec_2014-08-31_Fig._6_-_Szen_Schiff.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/c/cc/Bielefeld-CeBiTec_2014-08-31_Fig._6_-_Szen_Schiff.png" width="250px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 17: Scenario for ships</font>
+
       <font size="1" style="text-align:center;">fig. 18: Scenario for ships</font>
     </div>
     </div>
</td>
</td>
Line 231: Line 238:
<div class="element" style="margin:10px; padding:10px; text-align:center; float:right">  
<div class="element" style="margin:10px; padding:10px; text-align:center; float:right">  
       <a href="https://static.igem.org/mediawiki/2014/8/85/Bielefeld-CeBiTec_2014-08-31_Fig._7_-_Szen_Raumstation.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/8/85/Bielefeld-CeBiTec_2014-08-31_Fig._7_-_Szen_Raumstation.png" width="250px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/8/85/Bielefeld-CeBiTec_2014-08-31_Fig._7_-_Szen_Raumstation.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/8/85/Bielefeld-CeBiTec_2014-08-31_Fig._7_-_Szen_Raumstation.png" width="250px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 18: Scenario for a space station</font>
+
       <font size="1" style="text-align:center;">fig. 19: Scenario for a space station</font>
     </div>
     </div>
</td>
</td>
Line 250: Line 257:
<div class="element" style="margin:10px; padding:10px; text-align:center">  
<div class="element" style="margin:10px; padding:10px; text-align:center">  
       <a href="https://static.igem.org/mediawiki/2014/6/66/Bielefeld-CeBiTec_2014-10-12_solar_roof.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/6/66/Bielefeld-CeBiTec_2014-10-12_solar_roof.png" width="750px"></a><br>
       <a href="https://static.igem.org/mediawiki/2014/6/66/Bielefeld-CeBiTec_2014-10-12_solar_roof.png" target="_blank"><img src="https://static.igem.org/mediawiki/2014/6/66/Bielefeld-CeBiTec_2014-10-12_solar_roof.png" width="750px"></a><br>
-
       <font size="1" style="text-align:center;">fig. 19: Solar roof designed by <a href="#Toyota">Toyota</a></font>
+
       <font size="1" style="text-align:center;">fig. 20: Solar roof designed by <a href="#Toyota">Toyota</a></font>
     </div>
     </div>
This so called "Solar Powered Ventilation System" was designed by <a href="#Toyota">Toyota</a>. It uses the self-produced electricity to power an electric fan to draw outside air into, through, and out of the cabin. It lowers the cabin temperature to near the outside temperature once the inside temperature of the car reaches 68 degrees Fahrenheit. Although the photovoltaic panels on top of the car were originally build for electric cars the system could be used to power the bacteria in our fermentation system.
This so called "Solar Powered Ventilation System" was designed by <a href="#Toyota">Toyota</a>. It uses the self-produced electricity to power an electric fan to draw outside air into, through, and out of the cabin. It lowers the cabin temperature to near the outside temperature once the inside temperature of the car reaches 68 degrees Fahrenheit. Although the photovoltaic panels on top of the car were originally build for electric cars the system could be used to power the bacteria in our fermentation system.

Revision as of 21:21, 15 October 2014


SYNENERGENE

Applications

For the purpose of thinking about application scenarios we get in contact with many different companies.
First of all we did some brainstorming about different possibilites for an application. After this we did some research about plausible ideas. We used this research as a base for our contact with different firms and persons.
As a background for all applications we first talked to Dr. Arnold Sauter who does research about technological impact assessment for the german Bundestag (TAB). He told us that red and white biotechnology as industrial application is routinely used and socially accepted in Germany for more than 20 years. Because of this and the fact that we use a closed system for fermentation our project may be applicable from the political side of view. As long as the bacterial culture is destroyed after fermentation the use of genetical modified organisms is not restricted.
With this background we workend on several application scenarios which we seperated into different categories. The categories are based on the differentiation of our modules: Electricity, carbon dioxide and isobutanol.

Problem description

fig. 1: Decrease of incoming electricity.

The main problem of today's society is the transport and storage of electricity. It is tried to cover a high amount of required energy through regenerative sources like solar, photovoltaics, wind or geothermal energy. The problem of this source is fluctuating availability. To stay safe the most part is covered through traditional energy sources. This means that surplus of energy mainly consist of regenerative energy. The surplus of energy cannot be stored efficiently so that it is wasted. A further problem is that a part of the energy will be lost during the transport. For example the rotor of wind power stations is moved by the wind which converts wind energy into mechanical energy. This mechanical energy will be converted into electricity. The conversion of energy leads to a loss of energy. Only 45% of the original energy will get to the electrical network.
The percentage of regenerative energy as an electricity source increases in Germany over the last years continuously. Wind power is one third of this.
This leads to the fact that the new sources through regenerative energy cannot be used as effective as it might be able to.



fig. 2: Percentage of energy sources to the pool of regenerative sources.
Possible applications

fig. 3: Scenario for wind power station

With our project we engage these problems. We aim to store the surplus of energy by generating a product which can be combusted to produce energy again.
Our system relies on a fermenter in which bacteria grow by using electricity. The growth should be enhanced through the gain of reduction equivalents.
One application type we think of is the stationary application. With stationary application the size of the fermenter can be increased and the volume of generated product increases too. It makes sense to use sites where an surplus of energy arises. For example we are thinking of an application at wind power stations. Some of the produced energy could be used directly to produce more energy by the wind power station. It makes sense to hold the fermenter in operating state the whole time because there are some moments when the amount of surplus is very high. The problem is that the produced energy has a voltage of 10-30kV. To reduce the voltage transistors has to be built for each fermenter. The costs of this project will exceed each limit. A further development of this idea is to place our fermenter at electric power transformation substations. The needed transistors are already installed. The incoming regenerative energy would be used as the energy for the fermenter. A problem therefor is that we need continuous current for fermentation which is produced at the wind power engine but immediately transformed into alternating current.
The availability of energy through regenerative sources varies. The energy from regenerative sources in Bielefeld is never down regulated while regulation at coast regions is more common. We got insights into the load profile of a wind power engine of Bielefeld by SWB Netz GmbH.


fig. 4: Seasonal load profile of a Bielefeld wind power engine
The load profile showed a high variance throughout a day, a month, a season or even a year. This led to the idea to use small wind energy power engines. They have a height of 15-30 meters which results in a high sound annoyance. Until now they lack in a real application. Maybe they are a plausible base for our fermentation system.



fig. 5: Scenario for house

A second application scenario is to install our fermenter at anybody’s home. Many houses already produce regenerative energy through photovoltaic panels on the roofs. The problem of this production is that the whole amount of produced energy cannot be used by the occupants itself. Most of the energy will be delivered to electric power transformation substations. It would make sense to store the energy at home where it is produced. Therefor the fermenter would be placed in the cellar. The produced isobutanol could be extracted and stored. Applications for the isobutanol at home could be various. For example it could be added to electric machines like lawn-movers or used as an addition for the fuel of the car. Additionally isobutanol might be used as a heating substance.




fig. 6: Scenario for industry

The third application for stationary application would be at industrial production sites where isobutanol is needed. The fermenter would be placed directly on the premises. Photovoltaics would feed the bacteria in the fermenter which generate isobutanol for the productions of the company. An example production site would be a varnish producer. We got in contact with the Eckart GmbH, a member of Altana. They told us that they do not use isobutanol for production of pigments and others but butanol is a often mentioned theme for discussion.








Conclusion

An application at home seems plausible for users of photovoltaics. The problem might be the implementation of the whole system. The heating system has to be changed to isobutanol. This leads to a dependency on the fermenter. If a problem leads to cell death of the culture in the fermenter the heating system fails.
The application for industrial production sites sounds very inefficient at this stage of development. Presumably the isobutanol is much cheaper to buy for the company than to build up a large fermenter which makes the company dependent.
The first application for the wind power station looks the most feasible one. If the system is installed at electric power transformation substations, unused energy could be taken for production. A large amount of regenerative energy is surplus. If there is a problem with the culture in the fermenter which leads to the cell death no isobutanol can be produced. In the first application, the problem can be solved because not the total volume of isobutanol is directly needed.
Wind power for example is a seminal regenerative energy source. The number of wind power stations has increased throughout the last years.


fig. 7: Development of wind engines from 1993 to 2014
It has to be noted that the typical location of wind power stations shifted because of the technology development.

fig. 8: Distribution of the Germany-wide Cumulative Capacity across the Regions, Status: 31 December 2013 (www.windguard.de)
The increasing number of wind power stations and the increasing capacities result in a huge gain of capacity in megawatt.

fig. 9: Development of the Average Capacity of Land-based WTG’s Erected and Cumulatively Present in the Turbine Portfolio in Germany, Status: 31 December 2013 (www.windguard.de)


fig. 10: Development of the Annual Installed and Cumulative Capacity (MW) from Land-based Wind Energy in Germany, Status: 31 December 2013 (www.windguard.de)
For the future several plans were made to invest more time and money in wind power stations. The building of offshore wind parks will hardly increase in the next years which results in an increase of available energy.
In addition the development of the different states shows that more wind power stations will be build throughout the next years.

fig. 11: Addition to Wind Energy in the German States, Status: 31 December 2013 (www.windguard.de)

Problem description

The increasing atmospheric concentration of carbon dioxide is one reason for the global warming. Beside natural carbon dioxide sources there is a huge contribution from humans. There are many attempts to reduce the emission of greenhouse gases like carbon dioxide. An alternative strategy could be the fixation of this particular gas from the air.



fig. 12: Greenhouse gas CO2 emission worldwide. (Wikipedia)

Possible applications

fig. 13: Scenario for CCS technology

fig. 14: Scenario for industry


Our modified bacterium uses carbon dioxide for its growth and the product synthesis. It could be able to convert the atmospheric carbon dioxide to oxygen and an organic carbon molecule. Important for this process is a high carbon dioxide concentration in the environment of our bacterium. Possible sources of concentrated carbon dioxide are depots which are currently filled while applying carbon capture and storage. This technology was developed to reduce emission of carbon dioxide by pumping it into the ground. There are many fears of leaky storages. Our system could be applied to empty such critical storages and store the carbon in another form.




Another application is the use of emission gases from industrial plants. Instead of pumping carbon dioxide under the ground it could be used as growth substrate for our bacterium. Of course this is only useful if the carbon dioxide creating process is not used for electricity production.

The bacterium needs electric power for the carbon dioxide fixation process. The above mentioned application requires a renewable form of electricity generation to provide plenty of electric power. This could be achieved either by increased use of solar and wind energy or by future technologies like nuclear fusion.


Conclusion

The problem of increasing CO2 amounts could be engaged by the CCS technology. The advantage of this technology is that it is a cost effective option to reduce carbon dioxide. The development of this technology leads to an application in different sectors.


fig. 15: CO2 captured in 2050 by sector (IEA)

The plan to develop the CCS technology is taken into account by different countries. They aim to improve the technology and apply it at industrial sites. CCS could reduce emission by 4 Gt anually by 2050 if 20 - 40 percent of the facilities were equipped with CCS.


fig. 16: Global development of CCS 2010 - 2050 (IEA)

These statistics show that the CCS technology seem a feasible development throughout the next years. By adding our fermentation system, bound carbon dioxide could by efficiently used by converting it to isobutanol. The advantage is that this kind of carbon source will not deplete in the next years because the amount of emitted carbon dioxide is high.

Problem description

Crude oil is the most important energy source worldwide; among other things, it is required for the production of gasoline and diesel. However, the increasing scarcity is not caused solely by the finiteness of this raw material. On the one hand, political unrest and security problems in the oil-producing countries compromise the security of supply and on the other hand, the price of oil rises by growing demand and speculative markets. Therefore, it is very important to reduce the dependence of the mobility of crude oil in the future. In Germany, there is a decline in sales of crude oil because of the EU targets. Political parameters demand a CO2-reduction of 95 g CO2/km for cars in 2020. This assumes a remarkable increase in efficiency of the applied energy in combination with innovative technologies.


Possible applications

We want to rectify these problems with our project. We intend to produce a substance which can be used as a biofuel. We have chosen isobutanol because it can easily be used as a fuel additive. In contrast to the commonly used gasoline supplement ethanol, the energy density of isobutanol is higher. Theoretically, this means a smaller quantity of this fuel is needed to operate a vehicle. For this reason, our project can be applied for mobile applications.


fig. 17: Scenario for car design

fig. 18: Scenario for ships

fig. 19: Scenario for a space station


First we think of an implementation in the design of cars. Our idea is, that isobutanol is produced during the ride and the fuel in the tank is diluted. The bacteria are in a fermenter in the car. The required carbon dioxide is recieved from the exhaust fumes of the car, while the required electricity is obtained from the self-loading battery or additional photovoltaic panels on top of the car. This idea works until the gasoline supplement reaches the 15 volume percent, which is the norm in Germany and the EU. Gero Storjohann of the German Bundestag told us per e-mail that there are several norms which we have to take into account. The limit is set by the total oxygen in the fuel (DIN EN 228). A large automotive firm from southern Germany confirmed that isobutanol is a possible alternative to ethanol as a fuel additive. Several working groups are doing basic research in this field as mentioned on the Homepage of the "Bundesministerium für Bildung und Forschung (BMBF)".

A second idea for an application is the installation of our fermenter in the in-cabin room of a ship. Here the carbon dioxide is obtained from the exhaust fumes and the electricity is received from the affixed photovoltaic panels on the ship. This idea is similar to the application on cars. On the ship it is also thinkable to gain the electricity from small wind engines which are also affixed on the ship. Until now mainly fat oil is used to fuel ships and other alternatives are rare and not implemented yet. Our project looks more plausible by thinking of the waste recovery system which is performed through a fermenter with bacteria on ships. This means that the infrastructure for a fermenter is available.



Until now all of our ideas are mobile applications with affection to the earth. But what about locomotion in the space? Space stations have big photovoltaic panels and their generated electricity is not used completely. This electricity and the carbon dioxide available by the breathing of the humans means that a production system at a space station is possible. The NASA already send bacteria in a small fermentation size to the space to do some experiments.




Conclusion

We did research about all three application ideas. It looks feasible to construct a fermenter for a space station. Sadly enough we could not get any further information because we got no contact to stakeholders in this field. Combining our technology with a ship sounds good because fermentation size constructs are already used on several ships to recover waste. This means that there already is experience with bacteria on board. This includes service, repair and control. A problem for this application is that ships usually use fat oil which can not be diluted with isobutanol to increase the cruising range of the ship.
The preparation of a car to use a fermenter seems complex. But other properties for using our system are already given like mentioned above. For example isobutanol is a proper alternative to ethanol. It has better energy density in comparison to ethanol but has a lower octane rating. This means if there is the possibility to purchase isobutanol for a lower amount of money than ethanol, it could be used as an alternative dilution factor. A large automotive firm of southern Germany is already testing a fuel with an ethanol dilution of 20%. This means that the development of diluted fuels will advance throughout the next years. This could be positive for our project because the limitation of gasoline supplement is increased and the produced isobutanol can longer be supplied. Another development for cars is the adhesion of photovoltaic panels on the roof of the car. In the first thought it sounds futuristic but this was already build as the picture shows.


fig. 20: Solar roof designed by Toyota
This so called "Solar Powered Ventilation System" was designed by Toyota. It uses the self-produced electricity to power an electric fan to draw outside air into, through, and out of the cabin. It lowers the cabin temperature to near the outside temperature once the inside temperature of the car reaches 68 degrees Fahrenheit. Although the photovoltaic panels on top of the car were originally build for electric cars the system could be used to power the bacteria in our fermentation system.
By discussing with a large German automotive firm we talked about problems of crash-safety, mobile technology and the available space in the car for our fermentation system. We came to the conclusion, that a new car design is required for our idea. Currently available cars can not be upgraded with our project and a further development of this idea is necessary.
The table below (Spring 2014) shows that the range and the hours to recharge is not that optimal at the moment for several users. This fact shows that there is still a long time to go for our system to be applied. The effectivity of an electric car is not as high as it can oust a gasoline car. After the discussion with the automotive firms it becomes clear that there will be an equation between both types of cars.

Electric vs. Gasoline
No tailpipe emissionsGreenhouse gases/pollution
100 +/- mile range300+ mile range
Hours to rechargeMinutes to refuel
2 cents per mile12+ cents per mile
tab. 1: Comparison of electric and gasoline vehicles

References