Economical View

The economical considerations regarding our project were carried out according to the motto:

Make the world a better place - Open access for scientific progress

In the center of every economic analysis are the customers and their needs and desires. Every commercial company is interested in satisfying and dealing with all customer needs for better sales figures, in order to maintain regular clientele. Both measures aim for higher financial profits. On the global seller’s market of technical laboratory equipment there is a permanent competition between the existing providers. On the one hand, this competition depends on the mentioned financial profits and, on the other hand, on the following factors: technical improvement followed by price wars. Due to globalization products from the Asian market are increasingly competing with the American and European market resulting in intensitief price wars. On the Asian market personnel and production costs are much less and thus the same product can be sold with higher profits. Some of these products are less expensive but are often of lower quality, too. However, for a company it is important to chose a good price-performance ratio because this factor always catch customers and influence their purchase decision.

Costs and operating expenses for companies producing technical laboratory equipment (Thermo Fisher Scientific, 2013)

Take a look at cost calculations for technical laboratory equipment including development, production, transport, warehousing and sale. Usually, you will find that in this branche there are really low costs for research and development, restruction and amorthilisation. In contrast, general expenses and costs for administartion, revenues, and sales are high. Lastly, financial profit is a big cost point cause businesses have to be self-financing. In general, these factors are making technical equipment for labs really expensive, and therefore unaffordable for low-budget instutions.

One of the world's biggest producers of laboratory products is [http://www.thermofisher.com/en/home.html Thermo Fisher Scientific]. They also offer photometers and other equipment. The image on the left side shows all costs and operating expenses listed in the [http://ir.thermofisher.com/investors/financial-information/annual-reports/default.aspx Annual Report 2013] from Thermo Fisher Scientific.

We follow a strategy to circumvent unnecessary costs for customers by realizing a social vision. In accordance with the principle of open source including both open hardware and open software, information where to get the necessary components, quantities, step-by-step technical construction manuals and circuit diagrams are published online for free. Potential customers can follow our provided instructions and acquire information from our Engineering page. Therefore, our profit is not of financial nature but is instead based on recognition and on motivating other iGEM teams and companies to spread the idea of open hardware, too. In accordance with the motto "Do it yourself!" (DIY) we offer low-budget versions through reducing costs at as many points as possible, except for the basic costs for material. Customers with a little technical dexterity, motivation to try something new and who are keen to experiment can follow our step-by-step construction manual to create their own custom-made devices.

Social vision as economical strategy for creating access to low-budget technical equipment.

To make our product more user-friendly, we considered offering device kits. When offering kits customers do not have to order a lot of separate device parts from different suppliers. However, this introduces the disadvantage of a loss of flexibility. Yet it is very important to have the opportunity to modify the devices, for example, by choosing alternative parts or including add-ons, because research requiring novel techniques advances quickly in the natural sciences. With our concept, improvements and adjustments are thus immediately realizable.

Lastly, we want to mention that our vision is limited because it is incompatible with capitalism which rules the global market. Generally, companies are profit oriented and follow a different economical strategy than our iGEM team. As non-profit concept, our idea is therefore limited to a group of customers with lower budgets.

WatsOn

The measurement device WatsOn for our 2D biosensor has been designed according to our social vision. So far, we have not found comparable devices on the market. Here, we definitely take a pioneer role. Following our DIY concept, you can create your own WatsOn for just $310 using the given construction manual. All components for putting a WatsOn together are easily available all over the world using the following links.

Such low prices in combination with the DIY concept opens a grand new customer market and lets our device compete with commercially available products. Especially in developing counties our WatsOn could help improve health infrastructure since high cost are eliminated as an obstacle. The low material costs and the high technical flexibility turn WatsOn into an adequate device for developing countries, community labs and the biohacking scene. Particularly for developing countries, such a low-budget device poses a good alternative to regular devices for detecting pathogens and other bacteria. With our device, we create access to modern technology and working methods for everybody.

WatsOn's self-made concept makes it available for low budged institutions

For WatsOn, we offer both the construction manual and the image processing software Measurarty. Since we do not offer everything in one kit, it is possible for the user to modify the device and software according to personal needs such as adjusting the range od detectable microorganisms. By engineering the Cellocks detection of other pathogens is theoretically possible. However, please always mind the respective safety aspects when dealing with GMOs and human pathogens. Moverover, it is possible to detect not just the fluorescence of GFP and iLOV. Just by changing the filters and/or LEDs, the device can be modified such that the fluorescence other regularly used reporter proteins like YFP, CFP or RFP can be detected.

OD/F Device

One of our greater visions we share with the synthetic biology community is that everyone interested in biological work should have access to basic laboratory equipment. With our OD/F Device, we offer a low-cost solution for community labs, biohackers and high schools.

Advantages and Disadvantes of our OD/F Device compared to commercial availiable devices

In general we have to make a difference between our OD and our F device. The reason for this is the bad comparability to commercial devices. These don't combine the measure of fluorescence and OD. With our OD/F we offer a solution to combine both measurement methods in one device. With our given instructions it is also possible to build two separate devices one for OD and one for F. In this context we offer the user a higher flexibility of choice during the user is also able to modify our device according to his own ideas and wishes.

Commercially obtainable spectrophotometers like [http://www.opticsplanet.com/unico-model-s-1205-spectrophotometer-5-nm-bandpass.html UNICO S-1205], for example, costs 1.249 $ or more, and can measure optical density only. At the same time they are heavy, not portable and therefore not easy to handle. Specially the portability is beside the low costs a big poitive point which allows new rages of applications. But compared to our device it is able to work with a broader range of wavelengths and it has a higher accuracy and precision. Besides commercial [http://www.moleculardevices.com/systems/microplate-readers/fluorescent-readers/gemini-xps plate reader] are also available on the market, too. To compare our device with this comercial devices is really difficult because no portable devices like ours could be found which can also measure at a wave-band of 480 nm.

Comparable to our developed device in the points measuring range and portability is the OD-meter [http://www.laboratory-equipment.com/laboratory-equipment/cell-density-meter.php CO 8000]. This device measures also the OD at 600 nm but still costs almost 920 $. Our OD/F Device can measure OD as well as fluorescence for less than 60 $ like the following chart is showing. Cost saving lies here round about 850 $. Money that could definetly be given some better utilizations like into other projects. One weakness of our device is the low reliability compared to commercial devices. This is because of the used low cost materials. Prices are given in $ and € for better accoutability and conversion.

All you have to do is to order the needed parts from the list above, invest some time and have technnical skills to construct our OD/F Device. It's still this aspect which could also have simultanious a positive learning effect for people in schools and universities and so on. Therefore, we present a solution for low budget institutions like schools, universities, community labs and the biohacking scene.

Possible application of our OD/F device

In our cooperation with the Kaiser-Karls-Gymnasium and with NEAnderLab one of our target groups gathered first experience using our OD/F Device. As result we received the answer of our question if the device is useable in daily practice with teenagers. And we got a positive feedback for this. Even young people are able to use and understand our device without any security risk like mentioned on our safty page.

References

Annual report. (2013). Thermo Fisher Scientific. Available at http://ir.thermofisher.com/investors/financial-information/annual-reports/default.aspx.