Team:Hong Kong HKUST/pneumosensor/results

The two-component regulatory system in S. pneumoniae, consisting of the receptor ComD and its response regulator ComE was to be used in detecting the autoinducer molecule, competence-stimulating peptide (CSP) and so detect S. pneumoniae populations correspondingly. The activity of the comCDE operon promoter (P_comCDE) is induced by phosphorylated ComE. In order to facilitate characterization of P_comCDE, we use the phosphorylmimetic ComE mutant, ComE^D58E, in the pKHS plasmid which was kindly sent to us by Martin et al., from the Université de Toulouse. The characterization of P_comCDE is for the purpose of linkage to the σ^x promoters module by regulating expression of the sigma factor.

The activity of Com-Box promoter is turned on by a specific sigma factor that is produced by a regulatory gene comX. The σ^x will bind to the Com-Box promoter region and activate gene expression. σ^x serve as an inducer with high specificity as it binds to an area of several specific 8 base pairs (TACGAATA) on the Com-Box promoter. This σ^x-Com-Box system could be used as a highly specific reporting system in our S.pneumonia detection platform. However in nature, ComX protein will be degraded by ClpXP enzyme which exists in E. coli and some other bacteria. Hence, to ensure the induction of Com-Box promoter by σ^x, ComW protein is needed as it functions to protect σ^x from being degraded by ClpXP. ComW protein will be degraded instead, increasing the amount of σ^x produced.

Construct
The three main components of the construct are comX gene, comW gene, and Com-Box promoter. We assembled comX and Com-Box promoter in one vector plasmid, while comW in a different plasmid. The system will be fused with a tagging protein and a reporting protein. Tagging protein is essential for detecting the σ^x and ComW protein expression by means of western blot. Reporting protein which is fluorescence protein is needed for reporting purpose, hence σ^x-Com-Box system could serve as a specific reporting system that will be useful for many synthetic constructs. σ^x generator and Com-Box promoter construct will be assembled separately in different plasmid before being combined into one plasmid.

Backbone pSB1C3 was used for σ^x generator construct and comW construct. comX gene / comW gene were fused with BBa_K880005 which contains a constitutive promoter (BBa_J23100) and strong RBS (BBa_B0034). The purpose of this strong constitutive promoter and strong RBS is to unsure the large production of σ^x and ComW protein throughout time. Then, a double terminator (BBa_B0015) is fused with the promoter, RBS, and comX. BBa_K880005 and BBa_B0015 were obtained from 2014 iGEM distribution kit.

Construct using pSB1C3 backbone consisting only σ^x CDS (BBa_K1379004), and σ^x followed by double terminator BBa_B0015(BBa_K1379045) was also built to facilitate assembly of σ^x to promoters and RBSs of choice.

Bacterial Strain
The bacterial strain of E. coli used is DH10B. Since this strain of E. coli has clpXP degradation enzyme which targets ComX for degradation, an excess amount of ComX protein is required to maintain enough amount of ComX for Com-Box promoter induction.

comX and comW gene
comX gene and comW gene were cloned from NCTC 7465 S.pneumoniae strain genomic DNA by PCR using Vent Polymerase.

ComX Tag Protein
We engineered a C-myc protein tag in the 3’ ends of comX by including the sequence in comX extraction primer.

3’ primer to extract comX with engineered C-myc tag gene sequence:

GCCGGA CTGCAGCGGCCGCTACTAGTA TTATTA CAGATCCTCTTCTGAGATGAGTTTTTGTTC GTGGGTACGGATAGTAAACTCCTTAAACAC

[6’ Cap] [21’ SpeI and PstI restriction site] [6’ terminator sequence] [30’ C-myc protein] [30' reverse complementary of 3’ comX]

ComW Tag Protein
We engineered a FLAG protein tag in the 3’ ends of comW by including the sequence in comW extraction primer.

3’ primer to extract comW with engineered FLAG tag gene sequence:

GCCGGA CTGCAGCGGCCGCTACTAGTA TTATTA CTTGTCGTCATCGTCTTTGTAGTC ACAAGAAATAAAACCCCGATTCATTACCAATT

[6’ Cap] [21’ SpeI and PstI restriction site] [6’ terminator sequence] [24’ FLAG protein] [32' reverse complementary of 3’ comW]

Backbone pSB1C3 was used for P_celA and P_comFA construct. P_celA / P_comFA gene was fused with BBa_E0240, which contains a medium RBS (BBa_B0034), GFP (BBa_E0040) and double terminator (BBa_B0015). The purpose of this GFP generator is to indicate the functionality of P_celA and P_comFA in the presence and absence of σ^x. BBa_E0240 was obtained from 2014 iGEM distribution kit. The bacterial strain of E. coli used is DH10B.

P_CelA / P_comFA gene

Identifying the Possible Promoter Regions
To date (12 Oct 2014), the core/minimal promoter region of P_celA has not yet been experimentally defined. In locating the promoter region required to initiate transcription, iGEM 2014 Hong_Kong_HKUST team attempted in making educated guesses based on relevant information available from the literature. The Com-Box promoter consensus sequence “TACGAATA” was BLASTed for targets in the Streptococcus pneumoniae genomes of strains R6, D39, ATCC7699 and NCTC7465 in the NCBI database. Genome of strain NCTC7465 was particularly given attention because its gDNA was available for manipulation. A list of loci with annotated genes returned. σ^x was known to turn on late competence gene and therefore loci containing any of those genes documented were favored and filtered for. Those loci were then manually checked for consensus among the 4 genomes mentioned above. A sequence of 67 base pairs stood out as a promising target because it was 1) upstream of a late competence genes celA (encodes competence protein CelA), and 2) was identical across the 4 genomes. This 67 bp region has varying upstream sequences and the potential promoter region can reach as far as 200bp. Different truncations (67, 100, 150, 180, 249, 300 bp) were planned for deciding the minimal promoter region, but in the course of construction, only the 100bp version could be finished in time. It was tested to be functional and therefore submitted as P_celA.

P_celA and P_comFA gene were both cloned from the genomic DNA of S. pneumoniae strain NCTC7465 by PCR using Vent Polymerase. The difference between these two promoters is the whole sequence of P_comFA was obtained from Wellcome Trust Sanger Institute, a British genomics and genetics research institute. (https://www.sanger.ac.uk/)

P_celA Forward primer: TTTCTGTCTAGAGTTGACCAAGGAAGACTATTTTGC

P_celA Reverse primer: GCCGGACTGCAGCGGCCGCTACTAGTAATTTTCTCCTCTCTTAGATTATTCGTAAGAGG

P_comFA Forward primer: TTTCTGTCTAGAGTGGACTTGGCCGTCCTCT

P_comFA Reverse primer: GCCGGACTGCAGCGGCCGCTACTAGTAGACGTTCTTCTTCTGTTAATTCATTCTCAG

Assembly
comX and comW construct contain 3 parts that need to be assembled: BBa_K880005 which contains constitutive promoter and RBS, comX engineered with C-myc tag / comW engineered with FLAG tag, and a double terminator in pSB1C3 backbone. Promoter, RBS, comX engineered with C-myc tag, and double terminator were combined using traditional digestion and ligation method. The ligation product was confirmed by digestion check and sequencing.

Com-Box construct also contains 3 parts that need to be assembled: P_celA/P_comFA promoter, BBa_E0240 which contains RBS, GFP and double terminator, and pSB1C3 backbone. All three parts were combined using traditional digestion and ligation method. The final ligation product was confirmed by digestion check and sequencing.

Characterization
RPU (Relative promoter unit) and leakage will be measured as a characterization of 100 base pairs Com-Box promoter (P_celA), and 160 base pairs Com-Box promoter (P_comFA). For Com-Box promoter characterization, σ^x generator construct which contains BBa_K880005, comX gene, and BBa_B0015, is ligated with P_celA / P_comFA construct containing Com-Box promoter and GFP generator. In order to characterize the two Com-Box promoters, σ^x generator-Com-Box construct was migrated from pSB1C3 to pSB3K3. RPU are measured with BBa_J23101 Andersen family promoter as a reference promoter.