REQUIREMENTS FOR ALL TEAMS
All iGEM teams must meet the following requirements to participate in the 2014 competition. Additional requirements specific to New Track teams are listed in the section below.
- Team Composition
- Team Structure
- Registration and Other Fees
- Project Documentation
- Part Submission
- Project Presentation
- Positive Contribution
iGEM teams consist primarily of undergraduate students at an accredited college or university. The team must be supervised by at least two instructors one of whom must be a faculty member. Both instructors must serve as primary contacts and are responsible for the official registration of the team, the team roster, certifying the safety form, and payment of team fees. Graduate students, postdocs, and others are welcome as team advisors on undergraduate teams. In the overgraduate section, graduate students, students over the age of 23 (on March 31, 2014), and other interested parties are eligible to compete on the team as student team members.
One team pays one registration fee, has one presentation at the Jamboree, one poster, and is eligible for one set of prizes. Several schools may combine to form a team and a school may have several teams. In particular, it is normal for a school to have both Software and Wetware teams.
- wiki requirements page.
- BioBrick-compatible (RFC10) biological parts in a standard BioBrick shipping plasmid pSB1C3, and as
- High-quality documentation in the iGEM Registry.
- iGEM 2011 Imperial College Acknowledgements page for an example.
- Safety Hub for details and applicable deadlines.
- poster judging guidelines for more information on how we are assessing the posters; formatting requirements and expected poster components are also specified here. Final pdf files of the posters must be submitted to iGEM HQ before or during the Jamboree weekend.
- Art and Design
- Community Labs
- Policy & Practices
Art and Design teams, please see the Art and Design page. In addition the the general requirements for all iGEM teams listed above, Art and Design teams are required to complete the following:
- Team Composition While iGEM is primarily a student competition, we acknowledge that there may be artists and designers who are interested in participating and who do not have a university affiliation. We strongly recommend that artists interested in participating with a team or forming their own iGEM team find team members and advisors from local universities or community labs. This is an experimental track, so please contact us at artdesign AT igem.org with any questions or concerns about participation and team requirements.
- Project Presentation: Each team must give a twenty minute presentation discussing their project at the Jamboree, including description of goals, process, and outcomes. In addition, teams must present a poster during the Jamboree poster sessions. Please feel free to bring any additional materials that support the presentation of your projects. Special presentation requirements (e.g. video screening, installations) can be arranged on a case by case basis (deadline for special requests: October 1, 2014). Please contact artdesign AT igem.org with questions.
- BioBrick Parts:Teams participating in the Art and Design tracks are strongly encouraged to work with the materials of synthetic biology, including BioBrick parts, although it is not a strict requirement. To receive a distribution copy of the parts registry, teams must request one from artdesign AT igem.org and have an affiliated university or community laboratory and follow all safety regulations. Teams that do wish to use and submit a new part must adhere to safety and iGEM submission guidelines.
Community Lab teams please see the Community Labs New Track page . In addition the the general requirements for all iGEM teams listed above, Community Lab teams are required to complete the following:
- Team composition. While there is no minimum number of team members, iGEM is a team competition and single individual entries will not be accepted. CL teams must have two advisors, one of which must be in the field of their chosen subject area.
- Community Lab teams must demonstrate they have access to a BL 1 lab in order to receive a copy of the distribution.
- Teams participating in the hardware aspect of the CL track are encouraged to bring their equipment to the Giant Jamboree. Teams may not bring live or inactive organisms as part of their equipment. This topic will be covered in more detail when evaluation criteria and awards are published.
As Community Lab teams are not operating within the framework offered by academic institutions, they must meet the following additional requirements:
- CL teams must be an incorporated entity (for profit or not-for-profit).
- CL teams must have a legal entity that has the ability to sign contracts.
Entrepreneurship teams please see the Entrepreneurship New Track page. In addition the the general requirements for all iGEM teams listed above, Entrepreneurship teams are required to complete the following:
- Lightning pitch: iGEM Entrepreneurship teams should prepare a lightening or elevator pitch. This should be a 3 minute summary of what you are trying to do, how you are doing it and why your audience should invest in you.
- Business Plan Submission: Submissions are needed to create a valuable community and commons of ideas. Teams are required to document the inspiration and examples of their business models, and solutions to common problems early SB entrepreneurs will likely encounter. The team's submission must be documented on the iGEM Wiki, including but not limited to a public executive summary, elevator pitch (max 3 min) video, and public presentation (Slides). You may upload your video to Vimeo or similar video sharing site that allows embedding so you can share your video on your Wiki, but you must also provide a copy to iGEM HQ.
- Confidentiality: iGEM does not take a position for or against intellectual property in Synthetic Biology. Note that the iGEM Entrepreneurship track does not require judges to sign non-disclosure agreements.
- Parts: Entrepreneurship teams are not required to submit parts.
Measurement teams, please see the Measurement New Track page. In addition the the general requirements for all iGEM teams listed above, Measurement teams are required to complete the following:
- Interlab Measurement Study: For the Measurement Track, it is also important to submit data taken for the Interlab Study. Data should be uploaded to the iGEM interlab measurement site, along with accompanying metrology worksheets. Data will not be considered if it is uploaded without an accompanying worksheet or if the worksheet does not give consent for inclusion of the data in the interlab study.
- Software Submission: If your team's entry includes the development of new software, you must make your software tools available as open source projects on the iGEM servers, per the requirements on the Software requirements page.
Microfluidics teams please see the Microfluidics New Track page . In addition the the general requirements for all iGEM teams listed above, Microfluidics teams will be expected to:
- Fabricate their own microfluidic devices. Teams can use the silicon molds provided to manufacture ring-mixers, but are encouraged to leverage any available rapid prototyping tools (laser-cutting, 3D printing, etc) to design and make their own devices.
- Perform synthetic biology experiments with their devices. Using their fabricated devices and either the provided controller or any of their own custom hardware (also encouraged), teams must demonstrate synthetic biology experiments with their system. These experiments could range from genetic circuit assembly to cell culture to circuit-testing in devices.
- Finally, teams will upload any new digital designs for devices and/or hardware along with any new controller code to “Metafluidics,” a new open repository of device and hardware designs for microfluidics, to share with a larger miniaturization community.
Space is limited, so please apply for the new microfluidics track as soon as you can!
Policy and Practices teams please see the Policy and Practices New Track page.
In addition to the general requirements for all iGEM teams listed above, Policy and Practice teams are required to complete the following:
- Developing your iGEM Policy & Practices Team:
- Faculty Advisors: Each team must work with at least two senior mentors. One of the senior mentors must be a faculty member. One mentor should be based in the humanities or social sciences (for example, law, economics, sociology, public policy), and one from any other discipline including, but not limited to, science, engineering, social sciences, medicine, and law. Additional faculty members may also be listed as faculty advisors. One faculty member must be designated as the primary faculty advisor. She or he is ultimately responsible for the official registration of the team, the team roster, and payment of team fees.
- Advisors: In addition to the required roles above, teams are encouraged to recruit non-faculty advisors. These can include postgraduate students and postdoctoral researchers, as well as current or former policymakers, government officials, legal advisors, entrepreneurs, or members of non-governmental organizations, regulatory agencies or funding bodies.
- Questions? This is an experimental track, so please contact us at policypractices AT igem.org if you have any questions or concerns about participation and team requirements.
- Project Submissions:
Team submissions are required to convey (1) the project inspiration, (2) clearly articulated question(s) the project proposes to address, (3) detailed method(s) used (and their assumptions), (4) discussion of the challenges encountered in pursuing this work, (5) an explanation of who the project findings should be of interest to and why, and (6) an explanation of how the approach(es) might be adapted and scaled for others to use.
These questions should be addressed in the following ways, in addition to the standard wiki, poster and presentation requirements for all iGEM teams. [Please note that these requirements are subject to revision until medal criteria are announced]:
- A 2-page executive summary (that can reference additional resources on your wiki)
- A 3-minute video that is accessible to an interested lay audience
- any other formats you think can help iGEM teams and the broader community understand and interact with your work. This could be anything from an educational handbook, a software tool, a report, or a policy brief. We encourage you to be creative and to think about platforms that can be broadly shared and adapted.
- Parts: Teams in the policy & practices division will not receive a copy of the 2014 distribution. They are not required to perform wet-lab work or to deposit new BioBricks in the Registry. Teams that do wish to receive a distribution copy of the parts registry must request one from policypractices AT igem.org, and be affiliated with a university or community laboratory. Teams that do wish to use and submit a new part must adhere to safety and iGEM submission guidelines.
- Developing your iGEM Policy & Practices Team:
Software teams are not be required to contribute parts to the Registry (but instead are expected to contribute to the GitHub software repository). Key requirements for software teams are:End User Documentation
Core requirements are:
- Wiki documentation of project aims, methods and success -- in line with the general iGEM requirements
- Detailed installation or setup instructions (if applicable)
- An well-designed User Guide explaining how to use of your program or tool
Core requirements are:
- submission of your complete source code and any auxiliary files to the iGEM github repository
- Use git versioninig from the start of your project so that the commit history is / will be available on github
- Comprehensive code documentation for outside developers
- more than one realistic test case
- automated unit tests, documentation of test coverage
- API documentation, preferably automatically built from source code documentation
Bonus points for:
- use of SBOL and other standards
- re-use and further development of previous iGEM software projects (or parts thereof)
- use and/or improvement of existing synthetic biology tools or frameworks
- development of well documented libraries for other developers rather than "only" stand-alone Apps for end users
- Demonstrate the relevance of your development for Synthetic Biolgy
- Devise an experimental test for your program/algorithm/work flow
notexpected to result in a super fancy engineering project. Instead we would like to see simple and straightforward experiments (for example: gene synthesis, expression, fluorescence of x constructs) which can be delegated to external labs or collaborating teams. iGEM/software will try to support teams who want to outsource experimental testing to academic or commercial labs. Details will follow.