Team:Uppsala/Project Killing

From 2014.igem.org

(Difference between revisions)
Line 86: Line 86:
<h3>Characterization</h3>
<h3>Characterization</h3>
-
<p>Colicin Fy is a bacteriocin that should specifically target Yersinia Entrecolitica and could potentially work as an alternative to modern day antibiotics. During the summer of 2014, Uppsala iGEM have worked to make the colicin into a working alternative to antibiotics and then characterize it. The bacteriocin was synthesized with a Histidine tag so that we would be able to extract it with IMAC and then prove its existence with the help of SDS-page.
+
<p>Our initial plan was to have an secretion-tag together with our colicin Fy allowing it to secret from the living cells. Unfortunately we did not manage to get the assembly of any of the constructs to fully work. Our enzymes for the Freiburg standard did not seem to work so we had to use SpeI and XbaI causing a stop-codon that we did not managed to mutagenise away.
 +
<br><br>
 +
We had however succeeded in creating construct without secretion-tag. The expression of colicin Fy with x6 HIS-tag was characterized via an purification of the protein with IMAC followed by an SDS page to confirm lenght, <a href=”https://2014.igem.org/Team:Uppsala/Project_Notebook”>[Link to protocol]</a>. 11 tubes of eluent from the IMAC was saved. The protein concentration in each tube was analyzed with a nanodrop. Tube 4 and 6 had higher concentration than the other tubes and was run on SDS page.
 +
<br><br>
 +
The results from the characterization experiments can be seen in figure 4 and 5. According to calculations based on the nucleotide sequence, the mass of colicin Fy is about 49,6 kDa. The protein ladder we used is Thermo Scientifics PageRuler Unstained Protein Ladder #26614 (figure 3). The thickest band is 50 kDa so our bands should be about at the same height.
 +
</p>
-
The first step in preparing for IMAC is to grow 200 ml liquid cultures that gets lysated by sonification. [LÄNK TILL PROTOKOL] The histidine tag on the end of the protein has affinity towards the nickel ions in the gel in the IMAC (Immobilized metal affinity chromatography). When the Histidine tag gets stuck in the column it is possible to filter out most other proteins that does not have high enough affinity towards the gel and thereby we hopefully end up with only the bacteriocin. [länk till protokol]
+
<table>
 +
<tr>
 +
<td><img src="https://static.igem.org/mediawiki/2014/0/02/Uppsala-igem2014-SDS_ladder.png"></td>
 +
<td><img src="https://static.igem.org/mediawiki/2014/1/1f/Uppsala-igem2014-SDS-page.png"></td>
 +
<td>Figure 4: The gel contains the following from the left to the right
 +
<ul>
 +
<li>1. Protein ladder</li>
 +
<li>2. Eluent 1 for lysate produced by bacteriocin producing bacteria</li>
 +
<li>3. Eluent 3 for lysate produced by bacteriocin producing bacteria</li>
 +
<li>4. Eluent 2 for lysate produced by bacteriocin producing bacteria</li>
 +
<li>5. Final eluent test-tube 4 for lysate produced by bacteriocin producing bacteria</li>
 +
<li>6. Final eluent test-tube 6 for lysate produced by bacteriocin producing bacteria</li>
 +
<li>7. Eluent 2 for lysate produced by the negative control</li>
 +
<li>8. Eluent 3 for lysate produced by the negative control</li>
 +
<li>9. Final eluent test-tube 4 for lysate produced by the negative control</li>
 +
<li>10. Final eluent test-tube 6 for lysate produced by the negative control</li>
 +
</ul>
 +
</td>
 +
</tr>
 +
<tr>
 +
<td></td>
 +
</tr>
 +
</table>
-
It is not possible to control if the result from the IMAC is correct on its own but needs to be considered together with the result from the SDS-Page gel. The end product from the IMAC was 10-11 tubes (as seen in picture 1) for each bacterial strain containing 2 ml of liquid each. Other eluents in the steps before were saved in order to be able to see if the protein was eluted in an earlier stage than the final stage. Analyzing the protein concentration in all tubes resulted in that tube 4 and 6 usually had higher concentration than the other tubes and were therefore taken to the next step.
+
<!--
-
+
-
The first step in preparing for IMAC was to grow 200 ml liquid cultures that was lysated by sonification. [LÄNK TILL PROTOKOL]Usually IMAC is also done with a pump but since the system is fairly small, gravitation was enough in this experiment. 2 columns were used in the experiments, that way it was possible to pour the buffers into the one situated higher up without disrupting the gel in the second column as well as giving a steady flow.
+
-
</p>
+
<table>
<table>
Line 158: Line 182:
<div class="panel">        <!-- This div and class contains the collapse effect -->
<div class="panel">        <!-- This div and class contains the collapse effect -->
-
 
+
<!--
   <h2>Read more/Hide</h2>
   <h2>Read more/Hide</h2>
    
    
<div class="panelcontent">  <!-- Everything put inside this div will be hidden inside a collapse effect! -->
<div class="panelcontent">  <!-- Everything put inside this div will be hidden inside a collapse effect! -->
 +
 +
<!--
<p>A picture of an earlier SDS-page that was run with more constructs, due to this we didn´t have that many controls to prove that this was the case and we couldn´t try all eluates. The existance of colicin Fybacteriocin in the construct with j23106 could be seen though, due to this we continued to try further charectarization with this construct (SDS-page gel before).
<p>A picture of an earlier SDS-page that was run with more constructs, due to this we didn´t have that many controls to prove that this was the case and we couldn´t try all eluates. The existance of colicin Fybacteriocin in the construct with j23106 could be seen though, due to this we continued to try further charectarization with this construct (SDS-page gel before).
Line 184: Line 210:
  
  
</div> <!-- Ends the hidden effect div -->
</div> <!-- Ends the hidden effect div -->
-
   
+
  <!--
</div>   <!-- Ends the collapse effect div -->
</div>   <!-- Ends the collapse effect div -->
-
 
+
<!--
<p>The IMAC and SDS-page managed to provide a strong indication that we did produce the colicin Fybacteriocin. There existed bands at the right places and the negative control did not have any bands at all. All the experiments were conducted in the same manor and if it was another protein that by chance stuck to the IMAC gel it should have been in the negative control as well. Regarding the different promoters we used J23106 ,is a well-studiedwell studied promoter and it is the one that is the clearest that it is actully there.
<p>The IMAC and SDS-page managed to provide a strong indication that we did produce the colicin Fybacteriocin. There existed bands at the right places and the negative control did not have any bands at all. All the experiments were conducted in the same manor and if it was another protein that by chance stuck to the IMAC gel it should have been in the negative control as well. Regarding the different promoters we used J23106 ,is a well-studiedwell studied promoter and it is the one that is the clearest that it is actully there.
<br><br>
<br><br>
Line 295: Line 321:
<p><i>picture 7: Tests to compare colicin Fybacteriocin lysate on the right plate compared to the N/C on the left, both plates are diluted to the same concentration as taken at the same time, for more picture check the APENDIX?
<p><i>picture 7: Tests to compare colicin Fybacteriocin lysate on the right plate compared to the N/C on the left, both plates are diluted to the same concentration as taken at the same time, for more picture check the APENDIX?
</i></p>
</i></p>
 +
 +
-->
<a id="ref_point4"></a><h2>Parts</h2>
<a id="ref_point4"></a><h2>Parts</h2>

Revision as of 18:03, 16 October 2014

Home

Failed to load tracking. JS is probably not enabled

Assembly Plan

Background

Bacteriocin

With the growing problem of antibiotic resistance spreading, we decided to use bacteriocins as our antimicrobial agent. A bacteriocin is a peptide that is produced naturally by certain bacteria and targets its close relatives. Unlike general antibiotics,the target of bacteriocins are very specific. The bacteriocin, colicin Fy is produced by Y. frederiksenii and it should mostly target other yersinia species. Bacteriocins will either attack the cell membrane or a mechanism inside the cell such as gene expression or protein production.[1] One of colicins Fy main target is Y. enterocolitica. It kills Y. enterocolitica by creating pores in its cell membrane. Y. enterocolitica is also one among the common pathogens that infects the gut and cause some serious symptoms[2]. These were some of the reasons to choose colicin Fy as the bacteriocin we want to express.

Spot42 RNA

Our goal was to design a seek and kill system. This implies that we only want to express the colicin Fy when our bacteria is close to the target. We choose this strategy because the cell would stress out to express colicin Fy all the time, even when not in close proximity to Yersinia. In order to make our bacteria only express the colicin Fy when we want, we have designed an sRNA system. We have based our design on the system that Team Uppsala iGEM 2012 implemented. .
The sRNA or spot42 consists of an antisense region that recognizes a specific RNA sequence to interact with and another region that recruits the protein Hfq. The Hfq protein blocks and prevents mRNA from binding to the ribosome. We have redesigned the antisense region so it will specifically recognize our USP45. This will make it bind to our USP45 and recruit the Hfq protein to stick on that region.[3] USP45 is the secretion tag that we have coupled to the colicin Fy. The sRNA will stick to Hfq and bind to the mRNA of USP45-Colicin Fy gene and that will block the translation. When our bacteria is in proximity of Y.entercolitica we want it to express the colicin Fy. Therefore, the sensing group have been working on a Yen system which will inactivate the promoter that regulates the spot42 when it is close to Y.enterocolitica.

Figure 2. The spot42 system

System design

The aim for the killing group was to construct two different constructs- one with an export tag and the bacteriocin, CFy, and the other with a sRNA system for inhibition of the toxin when not in proximity to yersinias. However, at first we wanted to insert our final construct into lactobacillus via a shuttle vector. Because lactobacillus is a probiotic we could use our system in a real scenario if you get an Yersinia infection in the gut. The final construct would consist of J23106-B0034-USP45-CFY and a construct for the sRNA spot42. The spot42 already includes an promtor.
Two different export tags were used. PelB for E.coli and USP45 for both Lactobacillus and E.coli. Two Anderson promoters were chosen, J23106 (strong) and J23116 (weak) for the colicin Fy because we wanted to find a balance, where E.coli would not die from stress (due to too high expression) or its own-produced toxin. To characterize our colicin Fy we wanted to purify our sample so we could see the protein on SDS-Page. In order to do this a His-Tag was required for an IMAC column purification. Therefore we also built the constructs with a 6X His-Tag.

We designed the colicin Fy according to the Freiburg assembly standard, biobrick 25. This would allow us to fuse our protein with the export tag without having to consider the stop codon from the scar of SpeI and XbaI from the biobrick 10 standard.

Silencing RNA system design

The silencing RNA system or sRNA system was also one of the primary aims for the killing group. We designed and modified the sRNA system from Team Uppsala iGEM 2012 called spot42. The spot42 was redesigned to sense our USP45 sequence and bind to it. We call our modified part, Spot42_USP45. The Spot42_USP45 system consist of an antisense region that will recognice our USP45 and it also has the part that recruits the Hfq protien that will block and inhibit the mRNA translation. The Hfq protein will stick to the antisense region, this will block the RBS from binding to the mRNA therefore inhibits the translation. We have designed three different antisense regions for our Spot42_USP45. They are all based on USP45 but with different lengths, 10, 15 and 20bp. This is to ensure that it is specific to only USP45. Otherwise it could bind to another region and inhibit a process that might be vital for the bacteria. We choose to have USP45 as our primary export tag since our initial goal was to build our system in lactobacillus. To help us with that we used knowledge from the Uppsala iGEM 2013 who worked with lactobacillus and USP45 among other things.

The whole system design

Our two constructs the spot42_USP45 and J23106-B0034-USP45-CFY was to be coupled with the parts from the other project groups. When our bactosile is close to Y.enterocolitica the YenR system will sense the OHHL molecule.This will inhibit the yenbox system and thereby inhibit the CheZ and Spot42_USP45. This will make the bacteria stop and since the Spot42_USP45 is inhibited, the colicin Fy will be produced and it will be in attack mode. And when the bactisile is not in proximity of the OHHL the yenbox system will be active and it will produce CheZ and Spot42_USP45 and make the bactisile motile and not producing any colicin Fy making it be in tracking mode. See figure 3.

Result

Characterization

Our initial plan was to have an secretion-tag together with our colicin Fy allowing it to secret from the living cells. Unfortunately we did not manage to get the assembly of any of the constructs to fully work. Our enzymes for the Freiburg standard did not seem to work so we had to use SpeI and XbaI causing a stop-codon that we did not managed to mutagenise away.

We had however succeeded in creating construct without secretion-tag. The expression of colicin Fy with x6 HIS-tag was characterized via an purification of the protein with IMAC followed by an SDS page to confirm lenght, [Link to protocol]. 11 tubes of eluent from the IMAC was saved. The protein concentration in each tube was analyzed with a nanodrop. Tube 4 and 6 had higher concentration than the other tubes and was run on SDS page.

The results from the characterization experiments can be seen in figure 4 and 5. According to calculations based on the nucleotide sequence, the mass of colicin Fy is about 49,6 kDa. The protein ladder we used is Thermo Scientifics PageRuler Unstained Protein Ladder #26614 (figure 3). The thickest band is 50 kDa so our bands should be about at the same height.

Figure 4: The gel contains the following from the left to the right
  • 1. Protein ladder
  • 2. Eluent 1 for lysate produced by bacteriocin producing bacteria
  • 3. Eluent 3 for lysate produced by bacteriocin producing bacteria
  • 4. Eluent 2 for lysate produced by bacteriocin producing bacteria
  • 5. Final eluent test-tube 4 for lysate produced by bacteriocin producing bacteria
  • 6. Final eluent test-tube 6 for lysate produced by bacteriocin producing bacteria
  • 7. Eluent 2 for lysate produced by the negative control
  • 8. Eluent 3 for lysate produced by the negative control
  • 9. Final eluent test-tube 4 for lysate produced by the negative control
  • 10. Final eluent test-tube 6 for lysate produced by the negative control

Parts

BioBrick codeTypeConstructDescriptionDesigners
BBa_K1381014RegulatoryJ23101-spot42Killing Group
BBa_K1381015RegulatoryJ23101-spot42Killing Group
BBa_K1381016RegulatoryJ23101-spot42Killing Group
BBa_K1381017CodingCFY-X6 hisKilling Group
BBa_K1381018TagB0034-USP45Killing Group
BBa_K1381019DeviceB0034-pelB-CFY-X6 hisKilling Group
BBa_K1381020GeneratorJ23106-B0034-pelB-CFY-X6 hisKilling Group
BBa_K1381021GeneratorJ23116-B0034-pelB-CFY-X6 hisKilling Group
BBa_K1381022DeviceB0034-USP45-CFY-X6 hisKilling Group
BBa_K1381023GeneratorJ23106-B0034-CFY-X6 hisKilling Group
  • [1] (2013) "Bacteriocins — a viable alternative to antibiotics?" Paul D. Cotter et al
  • [2] (2012) "Novel Colicin FY of Yersinia frederiksenii Inhibits Pathogenic Yersinia Strains via YiuR-Mediated Reception, TonB Import, and Cell Membrane Pore Formation" J.Bosak et al
  • [3] (2012) https://2012.igem.org/Team:Uppsala_University/Project