Protocol

Part 1: The Construction of the Worker System

Step 1: Gene Cloning

To find the optimal temperature for oprF and cynRTS composite amplification, we set a gradient of annealing temperature. The result shows that 58℃ is suitable to this PCR. The PCR product was stored in -20℃. The PCR reaction system was listed in table 1-1.

Table 1-1 Gradient PCR System

Components(50μl)	Volume(ml)
PrimerStar Buffer	10
dNTPs(2.5mM)	5
Primer-F(10μM)	1.5
Primer-R(10μM)	1.5
Template	1.5
PrimerStar	0.5
ddH2O	30

Step 2: Optimization of oprF

We choose the 188aa or 196aa of OprF as the CBP fusion points. Primers were designed (Table1-2) to clone the target fragment, and then the GS linker and/or the gene fragment coding CBP were added at the C-terminal of the target fragment.

The protein with GS linker, using the 188aa as CBP fusion point, was named as OprF-1. While the protein without GS linker, using the 196aa as CBP fusion point, was named as OprF-2.

Table 1-2  Primers of Optimization oprF

Primer	Sequence(5'→3')
oprF-CBP-F	CCGGAATTCAACTGAAGAACACCTT
oprF-CBP-R1	CCAGCCGCCATGATGCGGGGAAACCGGTTCCGGAGCCGGAGCGGC
oprF-CBP-R2	ATAGTTTAGCGGCCGCCGGCCAGCCGCCATGATGCGGGGA
oprF-GS-F	CCGGAATTCAACTGAAGAACACCTT
oprF-GS-R1	TGAACCTCCGCCACCTTTCGAACCACCGAAGTTGAAG
oprF-GS-R2	CCAGCCGCCATGATGCGGGGATGAACCTCCGCCACC
oprF-GS-R3	ATAGTTTAGCGGCCGCCGGCCAGCCGCCATGATGCGGGGA

Step 3: Construction of Vectors

pET28a vector and the PCR product were digested with EcoRI and NotI from Takara, and then retrieved and purified with DNA retrieve kits from Omega.

Then, pET28a(+) vector, gene oprF-1/oprF-2/cynRTS composite were linked together with T4 ligase to form a new vector: pET28a(+)-oprF-1/oprF-2/RTS. The reaction system for digestion and conjunction were listed in the table 1-3, 1-4 and the digestion results were displayed in fig1-1.

Table 1-3 Reaction System for Digestion

Components(50μl)	Volume(μl)
10×H Buffer	5
BSA	5
EcoRI	2.5
NotI	2.5
Fragment	25
ddH2O	10
Conditions	37℃ 1h

Table 1-4 for Gene Conjunction

Components	System components(10μl)
Buffer(with T4 ligase)	5
Insert	4.5
Vector	0.5
Conditions	16℃ 1h

Fig 1-1 Digested gene and plasmid

Step 4: Transforming the Plasmids into E. coli BL21 Strain

Step 4: Transforming the Plasmids into E. coli BL21 Strain 

Plasmids pET28a(+)-oprF-1 or pET28a(+)-oprF-2 or pET28a(+)-flA was transformed into E. coli BL21(DE3) and protein expression was analyzed.The strains were grown in LB medium containing 100ug/ml kanamycin at 37℃, 250rpm until OD600 reached 0.4–0.6. We then added IPTG to 0.5mM and continued the incubation at 28℃ overnight to induce the overexpression of OprF-CBP or OprF-GS-CBP or flA. The cells were collected, re-suspended with 10mM imidazole containing 0.1mM protease inhibitor PMSF and then disrupted using Selecta Sonopuls. After centrifugation, the sediment was treated with 1xSDS gel loading buffer and kept in boiling water for 5 minutes and applied to SDS-PAGE. The result was displayed in Fig 1-4.

Table 1-5  Reaction System of Colonial PCR validation

Components(10μl)	Volume(ml)
2×Ex Taq Mix	5
Primer-F(10μmol/L)	0.3
Primer-R(10μmol/L)	0.3
Template	0.3
H2O	4.1

Table 1-6  Reaction System of Double Digestion (37 ℃ 1h)

Components(10μl)	Volume(μl)
10×H Buffer	1
BSA	1
EcoRI	0.5
NotI	0.5
ddH2O	7

Fig 1-2 Gel images of novel plasmids with OprF-CBP/GS-CBP testified results

Fig 1-3 Gel images of novel plasmids with cynRTS composite testified results

The E. coli BL21(DE3) strain transformed with pET28a(+)-flA was kindly donated by Prof. David O'Hagan and Prof. James H. Naismith from University of St Andrews, Saint Andrews, Scotland, United Kingdom.

Step 5: Expression of Protein

Plasmid pET28a(+)-oprF-1/oprF-2/cynRTS composite/flA was transformed into E. coli BL21(DE3) and we get for protein expression analysis. The strains were grown in Luria broth containing 100ug/ml kanamycin at 37℃, 250rpm until an absorbance of 0.4–0.6 at 600 nm was reached. We then added IPTG to 0.5mM and continued the incubation at 28℃ overnight to induce the overexpression of OprF-CBP/OprF-GS-CBP. The cells were collected, suspended with 10mM imidazole containing 0.1mM protease inhibitor PMSF and then disrupted using Selecta Sonopuls. After centrifugation, the sediment was treated with 1*SDS gel loading buffer and kept in boiling water for 5 minutes and applied to SDS-PAGE.

Step 6: Surface Displaying Copper Ions

To identify that whether our OprF has anchored on the cell membrane of E. coli, we performed immunofluorescence assay. HA tag was added to the N-terminal of OprF-CBP so that the recombinant protein OprF-CBP-HA can be specifically recognized by anti-HA antibody. When FITC labeled anti-IgG antibody was used as the secondary antibody and interacted with the primary antibody, green fluorescence could be observed in the cell membrane of E. coli under the fluorescent microscope.

Part 2: The Construction of the Instructor System

All the parts except PpcoA we used to construct E. instructor are from kits in Distribution 2013.They are listed in table2-1.

Table 2-1 Parts from Kits in Distribution 2013

Name	Parts	Well	Short Description
CII	BBa_P0153	9A(plate3,2013)	Protein
CI	BBa_C0051	3A(plate3,2013)	Protein
RFP	BBa_E1010	18F(plate5,2013)	engineered mutant of red fluorescent protein
GFP	BBa_E0044	14G(plate5,2013)	mGFP mut3b+AAV
PR	BBa_R0051	6K(plate5,2013)	CI regulated promoter
PRE	BBa_R0053	6M(plate5,2013)	CII regulated promoter

Assemble all the elements via standard restrict sites:

1. PCR: PpcoA (add EcoRI, XbaI, SpeI and PstI restriction sites)

2. Double digestion: PpcoA PCR products and rbs+CII(LVA)+ter+ter/pSB1C3(BBa_P0153):

3. Colony PCR Validation (primer PpcoA F and PpcoA R):

The plasmid pPcoA-rbs+CII+LVA/pSB1C3 was extracted and sequenced.

4. Double digestion: PpcoA-rbs+CII+LVA/pSB1C3 and rbs+CI+tag-dT:

5. Colony PCR Validation(primer PpcoA F and cI R):

The plasmid PpcoA-rbs+CII+LVA-rbs+CI+tag-dT/pSB1C3 was extracted and sequenced.

6. Double digestion: PCR product of rbs+mRFP+tag and dT/pSB1C3:

7. Colony PCR Validation (primer mRFP F1 and mRFP R1):

The plasmid rbs+mRFP+tag-dT/pSB1C3 were extracted and sequenced.

8. Double digestion: PRE/pMD-19T and rbs+mRFP+tag-dT/pSB1C3:

9. Colony PCR Validation (primer PRE F and mRFP R1):

10. The plasmid PRE-rbs+mRFP+tag-dT/pMD19-T was extracted and sequenced.

11. Promoter lambda (cI regulated) with GFP (+LVA) reporter in pSB1A3:

12. The plasmid PR-rbs+GFP+LVA/pSB1C3 was extracted and sequenced.

13. Double digestion:（3A assembly）

14. PRE- rbs+mRFP+tag-dT/pMD19-T

15. PpcoA-rbs+CII+LVA-rbs+CI+tag-dT/pSB1C3

16. Colony PCR validation (primer cI F and mRFP R1):

17. The plasmid PpcoA-rbs+CII+LVA-rbs+CI+tag-dT-PRE-rbs+mRFP+tag-dT/pSB1C3 was extracted and sequenced using primer VF2 and VR.

Double digestion PR-rbs+GFP+LVA/pSB1C3

18. PpcoA-rbs+CII+LVA-rbs+CI+tag-dT-PRE-rbs+mRFP+tag-dT/pSB1C3

19. Colony PCR Validation (primer PRE F and GFP R):

20. The plasmid PpcoA-rbs+CII+LVA-rbs+CI+tag-dT-PRE-rbs+mRFP+tag-dT-PR-rbs+GFP+LVA/pSB1C3 was extracted and sequenced using primer VF2 and VR.

Part 3: The Construction of the Kill Switch

Plasmid construction:

PCR: CI repressor from E. coli phage lambda (+LVA) in pSB1C3（BBa_C0051）was amplified to add RBS using primer:

cI F: 5'–TATGAATTCTCTAGATAAGGAGATATAATGAGCACAAAAAAG-3' and cI R: 5'–TAATCTGCAGACTAGTGCGATCTACACTAGCACTATC-3'

Double digestion:

PCR product of cI+rbs obtained using gel extraction kit and double terminator (dT) in pSB1C3 were applied to double digestion. The reaction systems were listed in table 3-1, 3-2.

Table3-1 Digestion of Fragment (cI+rbs):

Reaction system	50 μl
DNA solution	41 μl
EcoR I	2μl
Spe I	2 μl
10×H	5 μl

Table 3-2 Digestion of pSB1C3-dT:

Reaction system	50 μl
plasmid	41 μl
EcoR I	2μl
Spe I	2 μl
10×M	5 μl

The mixture was incubated in 37℃ for 2h , then gel electrophoresis and gel extraction were performed:

Then, we linked them together at room temperature for 1h. The reaction system listed in table 3-3.

Table 3-3 Reaction System of Ligation

Ligation system	10μl
cI+rbs	4μl
Vector	1μl
T4 Ligase(contain 10x T4 Ligase Buffer)	5μl

Colony PCR validation:

Select monoclonal and applied to PCR:

The positive colone was cultured in LB overnight for plasmid extraction and sequencing.

Assemble all elements one by one using the same method:

Double digestion:

P_L lacI (BBa_R0011) in pSB1A3 and pSB1C3-cI+rbs-dT

Colony PCR validation(primer VF2 and cI R):

The plasmid PL lacI-rbs+cI-dT/pSB1C3 was extracted and sequenced.

Double digestion:

P_L/pMD-19T and rbs+mRFP+tag PCR products:

Colony PCR validation(primer VF2 and mRFP R1):

Colony PCR validation(primer VF2 and mRFP R1):

The plasmid PL -rbs+mRFP+tag/pSB1C3 was extracted and sequenced.

Double digestion:

P_L -rbs+mRFP+tag/pMD19-T and PL lacI-rbs+cI-dT/pSB1C3:

Colony PCR validation (primer VF2 and cI R):

The plasmid P_L lacI-rbs+cI-dT- PL -rbs+mRFP+tag/pMD-19T was extracted and sequenced.

Part 4: Measuring of Growth Curve

Step 1:

200μL overnight-cultured bacterial was added to vials containing newly prepared culture medium (containing 100μg/ml Kanamycin). Set one vial with culture medium as blank. All the samples were cultured in the shaking incubator with rotational speed at 200 rpm and temperature at 37℃.

Step 2:

OD600 values was measured using the nucleic acid analyzer. When the OD600 values of culture reached 0.6, 200μL culture was added to a new vial containing 5mL LB, 100μg/ml Kanamycin, 0.1M IPTG and CN-/F-/Cu2+ with different concentration. Set one vial without bacteria as blank. All these samples were cultured in the shaking incubator with rotational speed at 200 rpm and temperature at 37℃.

Step 3:

OD600 of samples from the vials were measured every 30 min.

Part 5: The Standardization of Parts

Materials (used in this part)

The materials we used in this part are listed in table 5-1 and table 5-2

Table 5-1: Bacterial strains and plasmids

Strains and vectors	Relevant genotype and characteristics	Originate
E. coli DH5α	Strains	conserved in the lab
pMD18T	Vectors	TaKaRa Biotechnology (DaLian)Co.,Ltd.
pSB1C3	Vectors	iGEM package

Table 5-2: Primers' Name and Sequence

Primer	Sequence(5’→3’)
oprF-F	G GAATTC GCGGCCGC T TCTAGAG ATGAAACTGAAGAACACC
oprF-R	TTT CTGCAG CGGCCGC T ACTAGT ACCAGCCGCCATGAT
ompC-F	G GAATTC GCGGCCGC T TCTAGA G ATGCGTCTTGGCTT
ompC-R	TGCA CTGCAG CGGCCGC T ACTAGT ATTAGAACTGGTAAACC
RTS-F	G GAATTC GCGGCCGC T TCTAGA G TCAGAACGGTTTGG
RTS-R	TGCA CTGCAG CGGCCGC T ACTAGT ACTACCGTGATTCATTTC
flA-F	G GAATTC GCGGCCGC T TCTAGA G ATGGCTGCCAACAGCAC
flA-R	TGCA CTGCAG CGGCCGC T ACTAGT ATCAGCGGGCCTCGACCC
ompC-m-A	CCGCTTCTAGAGATGCGTCTTGGCTT
ompC-m-B	GGTGTCACCACCGAACTCTGGCAGT
ompC-m-C	ACTGCCAGAGTTCGGTGGTGACACC
ompC-m-D	GTTACGCCACTAGTAAAGCCTTCAC
ompC-m-E	ATTGCAGGTAAGCCAGGGACGGACG
ompC-m-F	GTGAAGGCTTTGCTAGTGGCGTAAC
ompC-m-G	CGTCCGTCCCTGGCTTACCTGCAAT
ompC-m-H	CCGCTACTAGTATTAGAACTGGTAAACC

Step 1: Gene Standardized

PCR amplification with the primers set as the template (pET28a-OprF-CBP/OprF-GS-CBP/cynRTS composite/FLA). The conditions of the reaction were listed in table 5-3.

Table 5-3: The Reaction System to harvest target genes

Components(50μl)	Volume(μl)
Template	1.25
dNTPs	2.5
10×LA PCR Buffer	5
LA Tag	0.5
Primer-F(10μmol/L)	2.5
Primer-R(10μmol/L)	2.5
ddH2O	35.75

Step 2: Obliteration of the Illegal Restriction Sites in the Gene

It is necessary to add standard restriction enzyme sites-EcoRI/XbaI/SpeI/PstI to both terminals of each gene. However, the sequence of ompC contains EcoRI, SpeI and PstI restriction site. So we obliterated the restriction sites by site-directed mutagenesis based on overlap extension PCR. Briefly, target mutation (GAATTC→GAGTTC, ACTAGT→GCTAGT , CTGCAG→CTCCAA, ) was introduced into primers (ompC-m-A/B/C/D/E/F/G/H in table 5-2), and the four previous PCR products(ompC-AB, ompC-CD, ompC-EF, ompC-GH) were used as template for the second PCR, and the two previous PCR products(ompC-AD, ompC-EH) were used as template for the third PCR. The final PCR segment with target mutation sites was then cloned into pMD18-T vector for sequencing. The three PCR systems were listed in table 5-4, 5-5, 5-6.

Table 5-4: Reaction System of the 1st PCR

Components(50μl)	Volume(μl)
2×Ex Taq Mix	25
ompC-m-A/C/E/G(10μM)	1.5
ompC-m-B/D/F/H(10μM)	1.5
Template	1.5
H2O	20.5

Table 5-5: Reaction System of the 2nd PCR

Components(50μl)	Volume(μl)
2×Ex Taq Mix	25
ompC-A/E(10μM)	2.5
ompC-D/H(10μM)	2.5
ompC-AB/EF	5
ompC-CD/GH	5
H2O	10

Table 5-6: Reaction System of 3rd PCR

Components(50μl)	Volume(μl)
2×Ex Taq Mix	25
ompC-F(10μM)	2.5
ompC-R(10μM)	2.5
ompC-AD	5
ompC-EH	5
H2O	10

Step 3: Insertion of the Standard Parts into plasmid backbone-pSB1C3

pSB1C3 backbone and the standardized parts was digested with EcoRI and PstI and then retrieved and purified with kits from Omega. pSB1C3 and the standardized parts were then linked together to from new Biobricks.

Step 4 : Submission of New Standardized Parts

After completing all the validation, the four parts were submitted to iGEM official organization in the early October and arrived in New York in 8th Oct. The information was listed in the table 5-7.

Standard biobricks	description
pSB1C3-oprF-1(EcoRI PstI）	A major outer membrane protein of Pseudomonas aeruginosa functions as a nonspecific porin to allow the passage of small hydrophilic molecules. We cut the protein at Val188 and add a CBP tag to C-terminal with a GS linker between them.
pSB1C3-oprF-2(EcoRI PstI）	A major outer membrane protein of Pseudomonas aeruginosa functions as a nonspecific porin to allow the passage of small hydrophilic molecules. We cut the protein at Ala196 and add a CBP tag to C-terminal.
pSB1C3-ompC(EcoRI PstI）	Outer membrane porin protein C from Escherichia coli BL21(DE3)
pSB1C3-RTS(EcoRI PstI）	Cyn operon in Escherichia coli BL21(DE3) (cynR+cynT+cynS) is about cyanate detoxification.
pSB1C3-FLA(EcoRI PstI）	Fluorinase enzyme from Streptomyces cattleya catalyzing the formation of a C–F bond by combining S-adenosyl-L-methionine (SAM) and F- to generate 5’-fluoro-5’-deoxyadenosine (5’-FDA) and L-methionine.