"
Team:INSA-Lyon/Results
From 2014.igem.org
-
-
PROJECT
PROJECT- PROJECT SUMMARY
- ACHIEVEMENTS
-
WETLAB
-
MODELING
-
HUMAN PRACTICE
HUMAN
PRACTICE- HUMAN PRACTICE SUMMARY
- SYNBIO PERCEPTION
- PROJECT'S INTEREST
-
TEAM
Curli characterizationConfocal Laser Scanning Microscopy Analyzes
For the Confocal Laser Scanning Microscopy biofilm acquisitions, all the strains were cultivated in 96-wells microplate in M63 Mannitol during 16H at 30°C (See Protocol for details). See results in Figure 4.
Figure 4: Engineered bacteria biofilm characterization and quantification using Confocal Laser Scanning Microscopy
All the strains used are constitutively fluorescent to allow detection with confocal laser microscopy (ZEISS LSM510 META, 40X/1.3OILDIC, laser Argon 4 lines 30 W 458 nm, 477 nm, 488 nm, 514 nm, See Protocol). Positive control/CsgA+ (Wild-type E. coli curli producing strain); Negative control/CsgA- (csgA-knockout E. coli strain); BBa_CsgA (BBa_K1404006); BBa_CsgAHis1 (BBa_K1404007); BBa_CsgAHis2 (BBa_K1404008). A) Biofilm sections obtained by Z-stack acquisitions. B) Biofilm 3D reconstruction using IMARIS® from acquisitions in A). C) Bio-volume quantification and maximum of thickness measurement using COMSTAT2 (ImageJ). The strain marked with a star is significantly different from all others (Tukey’s test, p<0.05).
As no strains carrying our parts show a significant difference with the positive control, our parts insertion doesn’t modify the biofilm formation property. The His-Tag and His2-Tag engineered CsgA doesn’t disturb the curli formation.
We can conclude that expression of CsgA derivatives from the p70 csg promoter carried by the psb1c3 plasmid leads to functional CsgA, and allows E. coli to stick and form biofilm. Moreover, our results show that the addition of one or two His-Tag on C-term of CsgA doesn’t disturb the normal properties of curli (sturdiness, adhesion and folding of CsgA).- Nickel chelation
Nickel(II) chelation was evaluated in a CsgA- MG1655 background (in order to have only our modified or unmodified curlis at the surface of the strain) for each of the constructions (BBa_K1404006, BBa_K1404007,or BBa_K1404008). Dimethylglyoxime (DMG) was used as a complexing reagent, which forms a pink-colored complex (peak absorption at 554nm) in the presence of Ni(II).
Firstly, a calibration curve of the formation Nickel and DMG complexes was established.
Then, strains were assayed for biofilm nickel absorption on liquid cultures using the calibration curve, b measuring the OD of the complex formed for each strain at 554nm.
Although quantification is possible, this technique lacks precision and is more suited for qualitative studies. However, it is a cheaper alternative to mass spectrometry.
Nickel-DMG complex colorimetry measurement follows a linear regression from a concentration of 20uM to 100uM, linked to the gradient from transparency (at [20uM]) to pink (at [100uM]). This visual method allows us to compare the Ni chelation between our strains. The more pale the color is, the more Ni has been chelated. The culture supernatant of CsgA- bacteria from strain with the part BBa_K1404008 is less colored than the others, which shows that only this part allows to capture more nickel. These results show that the part BBa_K1404008 confers increased chelation to strain CsgA-. It is shown that it chelates more than part BBa_K1404006 and part BBa_K1404007.
A second method has been used, more quantitative and more precise (but more expensive) : mass spectrometry . The metal content of the bacterial pellets were assayed. The quantity of chelated nickel for each strain has been compared to the quantity of curlis formed by each strain.
Significant differences are indicated using lowercase letters, and different letters indicate significant differences (Tukey’s test, p < 0.05). Error bars represent standard deviations.
Taken together, these results show that the CsgA- Strain with part BBa_K1404008 chelates twice more than strain CsgA- with part BBa_K1404007. That means that only two His-tags on C-term can improve the natural nickel chelation capacities of CsgA . CsgA with a single His-tag did not perform better than a wild-type CsgA. Potentially, further increasing the amount of His-tags could improve the nickel accumulation capacities of CsgA.
- Survival after UV and high temperature exposure
To adress biosafety issues linked with GMOs, we worked on destroying our bacteria after letting them grow in a biofilm. As the captured metal is extracellular and Curli proteins are very resistant to environmental changes, live bacteria are not needed for our biofilter. Our goal was to obtain a biomaterial made out of modified Curli able to chelate nickel.
To find the best way to degrade bacteria and DNA, the following protocol was used to test the influence of UV light and temperature separately :
- Wells containing M63 cultures of strain 227 were put under UV light / at 60 or 70°C for different lengths of time. Well contents were then gradually transferred into Eppendorf and diluted (100, 300, 900 and 2700 fold).
- LB plates (without antibiotic) corresponding to UV/temperature exposure times (+ one plate for control) were then spotted with s227 different concentrations in order to be able to count survival bacteria after incubation at 37°C.
- Genomic DNA was extracted from s227 concentrated culture. From the solution obtained, Curli promoter(750 bp) was amplified by PCR with Q5 polymerase and designed primers.
- Epifluorescence observations were made after Back Light coloration with 200µL s227 liquid cultures.
UV light influence
No bacteria grew on LB plate after 15 minutes UV light exposure.
Control plate 5 min UV 10 min UV 15 min UV 20 min UV
Bacterian growth can be stopped this way.
gel PCR
Bacterian DNA seemed to be degraded after 10 min UV light exposure.
⇒ In consequence, UV light can be used to destroy DNA.
Control plate 15 min UV 20 min UV
Still some green-colored bacteria could be seen after 20 min UV exposure.
⇒UV light isn’t enough to kill bacteria.
Temperature influence
![Control plate](https://static.igem.org/mediawiki/2014/5/52/PlatesTemp60_1.png")
Control plate 15 min 60°C 30 min 60°C 45 min 60°C
Bacteria grew on LB plates even 45 min after being heated to 60°C.
⇒ 60°C isn't enough high to kill bacteria.
So we tried experiments with a temperature of 70°C.
15 min 70°C 30 min 70°C 45 min 70°C
No more bacteria on LB plate after 15min at 70°C
⇒Bacterian growth can be stopped as well as with UV light.
No DNA degradation at all.
PCR gel after DNA extraction from bacterian culture exposed to 70°C
⇒ In consequence, temperature doesn't enable to destroy DNA, in contrary to UV light.
No difference of coloration was observed between the control and the samples heated at 70°C : indeed a lot of green-colored bacteria remained after 45 min of heating.
Control plate15 min at 70°C30 min at 70°C45 min at 70°C
⇒ Temperature isn’t enough to kill bacteria just like UV light.
To solve this last problem, bacteria were put in contact with ethanol absolute. The Back Light coloration gives the following picture.
image benjamin
These numerous experiments lead us to developp a protocol in three steps, illustrated by the drawing below :
Global strategy to kill bacteriaPromoter optimization and characterization- Biobrick for promoter characterization The principal of the construction is shown in the figure below.
On a pKK backbone, two essential parts have been assembled: a promoter and a reporter. The reporter in this case is always the same: gfp. However, the promoter is different for each construction. The first promoter is P70, sequence found in the Resgistry. This construction is called p70::gfp The second promoter is PCurli, obtained from a PCR, sequence coding for the inter-genic regulation for curli production. This construction is called pcurli::gfp.
INSA ADN Concept Club
INSA de Lyon - Bâtiment Louis Pasteur
11 avenue Jean Capelle
69621 - VILLEURBANNE CEDEXMail : ia2c.asso@gmail.com
©2014 IGEM.ORG INSA-LYON - DESIGNED BY ALICE BLOT
Retrieved from "http://2014.igem.org/Team:INSA-Lyon/Results"- Wells containing M63 cultures of strain 227 were put under UV light / at 60 or 70°C for different lengths of time. Well contents were then gradually transferred into Eppendorf and diluted (100, 300, 900 and 2700 fold).
