From 2014.igem.org

Revision as of 13:15, 28 July 2014

BYU 2014 Notebook Edit July August

Home Team Official Team Profile Project Parts Modeling Notebook Safety Attributions

1 July 2014

Alpha Amylase: The previous transformation gave us several hundred colonies. This will make it difficult to find one that has the mutated Alpha Amylase plasmid. We will need to re-transform the PCR product into DH5a. (JB)

2 July 2014

Today we took our field trip to the water treatment plant in Park City, UT.

Alpha Amylase: I prepped a DpnI digest with cutsmart buffer, one from original mut product the second time around (when we had a good concentration of plasmid to start with) and one that was from that same PCR product but had already been digested, so it was a redigest. One only had about 1.5 uL of the PCR product to digest though, I believe it was the one with just the original mutagenesis product (hadn’t been digested already). (JB)

3 July 2014

Alpha Amylase: Transformed digests into DH5α. (JB)

4 July 2014

Alpha Amylase: No colonies again! (JB)

7 July 2014

Alpha Amylase: Dr. Grose said that the likely reason for no colonies was due to a diluted amount of PCR product being used since I only used 10 uL of the original mutated PCR product and added water, buffer, and DpnI for the digest I tried. She suggested transforming 10 uL of the PCR product + buffer mix in order to have a better chance of getting colonies with the mutated plasmid. (JB)

Dispersin B: I finished checking the results of my sequencing and to my relief Dispersin B appears to have been successfully transformed in both Colonies A and F. I set up a PCR reaction using the PIG 97 Dispersin Backbone snf the B1 107 and B1 108 Dispersin B primers because my next step is to transform the gene into the pet15b plasmid so I can start testing Dispersin's effectiveness quantitatively against the Biofilm. -JM

8 July 2014

Alpha Amylase: Transformations yesterday do not appear to have worked. Desi said that we could take the previous plate where we got several hundred colonies, pick from single colonies, streak them on a plate to grow them up and make sure we can obtain single colonies since they were so small on the last plate, and run PCR on them to see if there are any that look like they have the plasmid in them. (JB)

9 July 2014

Alpha Amylase: We discovered that the box of DH5α we had been using last week was not actually DH5α as someone had put the wrong tubes in the box. Hopefully this means that the transformations are working (given that we are actually transforming it into DH5α!). The mutated alpha amylase was retransformed into DH5a using 10 uL of PCR product as suggested last time by Dr. Grose since the PCR product was diluted during DpnI digest. (JB)

Dispersin B: Unfortunately after running my PCR product out on gel it doesn't look like I had any product. I had a very small amount of PIG 97 plasmid left so I only used .5 microliters for the PCR reaction. Next week I'm going to take the E. Coli cells I transformed with the PIG 97 Dispersin plasmid on the 20th of May and do a plasmid prep and purification so that I can have more PIG 97 to work with. Instead today I attempted to transform E. Coli cells with the Pet15b backbone so I would have enough to work with. In addition to plating 100 microliters of the transformed cells I diluted some into 5 mL of LB with Ampicillin and 100 microliters into 5 mL of LB with Canamycin in an attempt to grow up liquid cultures. The Canamycin being a negative control. Unfortunately neither the plate nor the cultures showed any growth so the transformation appears to have been unsuccessful. -JM

10 July 2014

Alpha Amylase: Finally, it looks like we may have some progress coming, despite accidentally spilling half of my transformation in the plating process. There was one colony, so it is looking more promising that the digest was effective and we may have one colony that was successfully mutated!

A liquid culture overnight in chloramphenicol was prepared from the single colony and the leftover on the stick was streaked on a chloramphenicol plate. A plasmid prep will be performed on the overnight and this will be sequenced in order to determine if this colony contains the mutant plasmid or the wild-type plasmid. (JB)

AiiA: Today I completed the ligation and transformation of Aii into DH5α. Because my sequencing returned an empty backbone last time, I am hoping that it works this time around. I am planning on picking up the plates tomorrow to prepare for colony PCR. (CZ)

11 July 2014

AiiA: I checked the plates today, and nothing had grown! Because we know it is no longer a problem with the E.coli, I am planning to recheck the digest of the backbone that I did next. (CZ)

Alpha Amylase: Busy day, so I just pelleted the cells down. (JB)

16 July 2014

Alpha Amylase: Today a plasmid prep was performed following the Denville procedure on the mutated alpha amylase colony from last week and this plasmid was then prepped for sequencing tomorrow. Each reaction consists of 2 uL of the mutated plasmid and 1 uL of either the forward signaling sequence alpha amylase primer or the reverse alpha amylase primer. (JB)

Aii: Today we decided with Dr. Grose to redo the amplification of Aii, since we got out a an empty backbone. I used some of the leftover amplified and purified insert that we had obtained previously, and redid the PCR. (CZ)

18 July 2014

Aii: There was a crack in the lid of my PCR tube, so I lost a fair amount of the amplified product. I redid the PCR twice, with one tube using the PCR from Wednesday as template, and another tube with my insert I purified in June.(CZ)

Alpha Amylase: We got back the sequencing results. The PstI restriction site located within the amylase gene remained unchanged meaning the mutagenesis did not work. We will have to redo the mutagenesis procedure on Monday. (JB)

21 July 2014

Alpha Amylase: Today we spent re-doing the site-directed mutagenesis and PCR digest since the previous two tries have been ineffective. Later that evening I added 1 uL of the DpnI digest and placed it in the 37 deg incubator to sit overnight. (JB)

Aii: Today I spent the time running a gel to check my PCR products. I also updated the journal. Although the bands were pretty smeary, there seemed to be a brighter band at the correct size. (CZ)

Dispersin B: I had a little over a uL of PIG 97 plasmid to work with so I diluted it in 10 uL of ddH2O and used 1uL to run PCR. The primers I used to run PCR were B1,107 and B1,108, forward and reverse primers for Dispersin B. I followed the Phusion PCR protocol- see common procedures. I also transformed DH5 Alpha cells with 1 uL of my diluted Dispersin B and plated on Cam and Amp resistant plates. -(JM)

22 July 2014

Alpha Amylase: I transformed 5 uL of the digested mutagenesis PCR product into 50 uL of DH5α following our standard transformation procedure. This was plated on a chloramphenicol plate and will let sit in the 35 deg incubator overnight. (JB)

23 July 2014

Alpha Amylase: The transformation done yesterday yielded no colonies. Dr. Grose had this same problem with the four other reactions she did yesterday as well with the same kit. She suggested this is likely due to an issue with the competent cells used as the kit we used was relatively new, so I redid the transformation of 5 uL PCR mutagenesis product in 100 uL of the XL 10-Ultra Competent Cells provided in the Quikchange II Site-Directed Mutagenesis Kit, followed our standard transformation procedure, plated these on a chloramphenicol plate, and will let set in the incubator overnight. (JB)

Aii: I began today by doing a PCR purification for both of my PCR products. That took some time, and afterwards I carried out a restriction digest of both my inserts and the backbone. I also CIPed the backbone. On Saturday I will continue with ligation.

Dispersin B: Unfortunately,when I ran the gel of Monday's PCR product I didn't get any banding aside from what appeared to be the primers at the bottom of the gel. The machine had melted the top of my PCR tube, but it's unlikely that such was the cause of my no product. I fear that the PIG 97 plasmid is too dilute for me to get a product from my PCR. Today I set up the same Phusion PCR reaction as Monday to try one more time and see if I just didn't pipette carefully enough on Monday. If it doesn't work again I did have colony growth on my Cam plate, so it's likely the plasmid successfuly transformed, so I will see if I can do a plasmid prep from a liquid culture of those colonies and use that new plasmid prep to PCR. I set up a liquid overnight culture from one of the colonies on the CAM plate,using 5mL of LB+ Cam solution. The last thing I did today was transform another group of DH5 Alpha cells with Pet15B plasmid and then I plated it on an Ampicilin agar plate. This was done so that when I get enough Dispersin B PIG97 plasmid to digest for an insert I will also have enough vector plasmid to digest it into. At which point I can ligate and transform the Pet15b with Dispersin B into E. Coli and begin testing it's biofilm degredation quantitatively.

24 July 2014

Alpha Amylase: The transformation seemed to have been ineffective. However, the four other transformations Dr. Grose did with the mutagenesis products also did not work. Desi said that there were more issues with the 50 uL DH5α but that the box of 100 uL DH5α was working so I will try the transformation over with that tomorrow. (JB)