Protocol

Our project is divided into four parts:

Part 1: The Construction of the Worker System
Step 1: Gene Cloning
To find the optimal temperature for oprF and cynRTS composite amplification, we set a gradient in temperature. Then we amplified oprF and cynRTS composite sequence by PCR in 58℃. The sequence was stored in -20℃. The PCR conditions were listed as table 1-1.

Table 1-1 ： Gradient PCR System

Step 2: Improvement of oprF
We choose the 188th and 196th amino acid of OprF as anchor points. Designing primers (Table 2-1）to clone the target fragment, and then add the GS linker and the gene fragment coding CBP at the end of the target fragment.
The protein regarding the 188th amino acid as anchor point and added GS linker was named as OprF-1 and the protein regarding the 196th amino acid as anchor point and not added GS linker was named as OprF-2.

Table 1-2  Primers of Improving oprF

Step 3: Construction of Vectors

Digest pET28a vector to donate a skeleton with EcoRI and NotI. Retrieve and purify the target genes with kits produced by Omega.

Afterwards, pET28a(+) vector, gene oprF-1/oprF-2/cynRTS composite were linked together to recombine a new vector: pET28a(+)-oprF-1/oprF-2/cynRTS composite. The reaction system for digestion and conjunction were listed in the table 1-3, 1-4.

Table 1-3  Reaction System for Digestion

Table 1-4  for Gene Conjunction

Fig 1-1 Digested gene and plasmid

Step 3: Transferring the Plasmids into E. coli BL21 Strain 

The recombined plasmids were transferred into BL21 strain, which later was grew in LB culture medium with 100μg/ml Kanamycin, 37℃ for one night. To ensure the conjunctions were correct, we confirmed the vectors by colonial PCR and gel electrophoresis, following the digestion of EcoRI and NotI to see the possibilities of reverse connection. The conditions for colonial PCR and dual-enzyme digestion reaction were listed in the table 1-5, 1-6.

Table 1-5  Reaction System Colonial PCR

Table 1-6  Conditions for dual-enzyme digestion reaction (37 ℃ 1h)

Fig 1-2 Gel images of novel plasmids with OprF-CBP/GS-CBP testified results

Fig 1-3 Gel images of novel plasmids with cynRTS composite testified results

The E. coli BL21(DE3) strain transformed with pET28a(+)-flA was kindly donated by Prof. David O'Hagan and Prof. James H. Naismith from University of St Andrews, Saint Andrews, Scotland, United Kingdom.

Step 4: Expression of Protein
Plasmid pET28a(+)-oprF-1/oprF-2/cynRTS composite/flA was transformed into E. coli BL21(DE3) and we get for protein expression analysis. The strains were grown in Luria broth containing 100ug/ml kanamycin at 37℃, 250rpm until an absorbance of 0.4–0.6 at 600 nm was reached. We then added IPTG to 0.5mM and continued the incubation at 28℃ overnight to induce the overexpression of OprF-CBP/OprF-GS-CBP. The cells were collected, suspended with 10mM imidazole containing 0.1mM protease inhibitor PMSF and then disrupted using Selecta Sonopuls. After centrifugation, the sediment was treated with 1*SDS gel loading buffer and kept in boiling water for 5 minutes and applied to SDS-PAGE.

Fig 1-4 Expression of Protein

Step 5: Surface Displaying Copper Ions
To identify that whether our OprF has anchored on the cell membrane of E. coli, we performed immunofluorescence assay. HA tag was added to the N-terminal of OprF-CBP so that the recombinant protein OprF-CBP-HA can be specifically recognized by anti-HA antibody. When FITC labeled anti-IgG antibody was used as the secondary antibody and interacted with the primary antibody, green fluorescence could be observed in the cell membrane of E. coli under the fluorescent microscope.

Part 2: The Construction of the Instructor System

All the parts except PpcoA we used to construct E. instructor are from kits in Distribution 2013.They are listed in table2-1.

Table 2-1 Parts from Kits in Distribution 2013

Step1: Plasmid construction:

Assemble all the elements via standard restrict sites:

1. PCR: pPcoA (add EcoRI, XbaI, SpeI and PstI restriction sites)

2. Double digestion: PPcoA PCR products and rbs+CII(LVA)+ter+ter/pSB1C3(BBa_P0153):

Colony PCR Validation (primer PpcoA F and PpcoA R):

The plasmid pPcoA-rbs+CII+LVA/pSB1C3 was extracted and sequenced.

3. Double digestion: PPcoA-rbs+CII+LVA/pSB1C3 and rbs+CI+tag-dT:

Colony PCR Validation(primer PPcoA F and cI R):

The plasmid PPcoA-rbs+CII+LVA-rbs+CI+tag-dT/pSB1C3 was extracted and sequenced.

4. Double digestion: PCR product of rbs+mRFP+tag and dT/pSB1C3:

Colony PCR Validation (primer mRFP F1 and mRFP R1):

The plasmid rbs+mRFP+tag-dT/pSB1C3 were extracted and sequenced.

4. Double digestion: PRE/pMD-19T and rbs+mRFP+tag-dT/pSB1C3:

Monoclonal colony PCR (primer PRE F and mRFP R1):

The plasmid PRE- rbs+mRFP+tag-dT/pMD19-T was extracted and sequenced.

Double digestion:

Step2: Transformation of bacteria and colony PCR(primer VF2 and VR):

Promoter lambda (cI regulated) with GFP (+LVA) reporter in pSB1A3:

The plasmid PR-rbs+GFP+LVA/pSB1C3 was extracted and sequenced.

Double digestion:（3A assembly）

PRE- rbs+mRFP+tag-dT/pMD19-T

PPcoA-rbs+CII+LVA-rbs+CI+tag-dT/pSB1C3

Colony PCR validation (primer cI F and mRFP R1):

The plasmid PPcoA-rbs+CII+LVA-rbs+CI+tag-dT-PRE-rbs+mRFP+tag-dT/pSB1C3 was extracted and sequenced using primer VF2 and VR.

Double digestion:

PR-rbs+GFP+LVA/pSB1C3

PPcoA-rbs+CII+LVA-rbs+CI+tag-dT-PRE-rbs+mRFP+tag-dT/pSB1C3

Monoclonal colony PCR (primer PRE F and GFP R):

The plasmid PPcoA-rbs+CII+LVA-rbs+CI+tag-dT-PRE-rbs+mRFP+tag-dT-PR-rbs+GFP+LVA/pSB1C3 was extracted and sequenced using primer VF2 and VR.

Part 3: The Construction of the Kill Switch

Plasmid construction:

PCR: CI repressor from E. coli phage lambda (+LVA) in pSB1C3（BBa_C0051）was amplified to add RBS using primer:

cI F: 5' –TATGAATTCTCTAGATAAGGAGATATAATGAGCACAAAAAAG-3'

and cI R: 5' –TAATCTGCAGACTAGTGCGATCTACACTAGCACTATC-3'

Double digestion: PCR product of cI+rbs obtained using gel extraction kit and double terminator (dT) in pSB1C3 were applied to double digestion. The reaction systems were listed in table 3-1, 3-2.

Table3-1 Digestion of Fragment (cI+rbs):

Table 3-2 Digestion of pSB1C3-dT:

The mixture was incubated in 37℃ for 2h , then gel electrophoresis and gel extraction were performed:

Then, we linked them together at room temperature for 1h. The reaction system listed in table 3-3.

Table 3-3 Reaction System of Ligation

Colony PCR validation:

Select monoclonal and applied to PCR:

The positive colone was cultured in LB overnight for plasmid extraction and sequencing.

Assemble all elements one by one using the same method:

Double digestion:

P_L lacI (BBa_R0011) in pSB1A3 and pSB1C3-cI+rbs-dT

Colony PCR validation(primer VF2 and cI R):

The plasmid PL lacI-rbs+cI-dT/pSB1C3 was extracted and sequenced.

Double digestion:

P_L/pMD-19T and rbs+mRFP+tag PCR products:

Colony PCR validation(primer VF2 and mRFP R1):

Colony PCR validation(primer VF2 and mRFP R1):

The plasmid PL -rbs+mRFP+tag/pSB1C3 was extracted and sequenced.

Double digestion:

P_L -rbs+mRFP+tag/pMD19-T and PL lacI-rbs+cI-dT/pSB1C3:

Colony PCR validation (primer VF2 and cI R):

The plasmid P_L lacI-rbs+cI-dT- PL -rbs+mRFP+tag/pMD-19T was extracted and sequenced.

Part 4: Measuring of Growth Curve

Step 1: 200μL overnight-cultured bacterial was added to vials containing newly prepared culture medium (containing 100μg/ml Kanamycin). Set one vial with culture medium as blank. All the samples were cultured in the shaking incubator with rotational speed at 200 rpm and temperature at 37℃.

Step 2: OD600 values was measured using the nucleic acid analyzer. When the OD600 values of culture reached 0.6, 200μL culture was added to a new vial containing 5mL LB, 100μg/ml Kanamycin, 0.1M IPTG and CN-/F-/Cu2+ with different concentration. Set one vial without bacteria as blank. All these samples were cultured in the shaking incubator with rotational speed at 200 rpm and temperature at 37℃.

Step 3: OD600 of samples from the vials were measured every 30 min.

Part 5: The Standardization of Parts

Materials (used in this part)

The materials we used in this part are listed in table 5-1 and table 5-2

Table 5-1: Bacterial strains and plasmids

Table 5-2: Primers' Name and Sequence

Step 1: Gene Standardized

PCR amplification with the primers set as the template (pET28a-OprF-CBP/OprF-GS-CBP/cynRTS composite/FLA). The conditions of the reaction were listed in table 5-3.

Table 5-3: The Reaction System to harvest target genes

Step 2: Obliteration of the Illegal Restriction Sites in the Gene

It is necessary to add standard restriction enzyme sites-EcoRI/XbaI/SpeI/PstI to both terminals of each gene. However, the sequence of ompC contains EcoRI, SpeI and PstI restriction site. So we obliterated the restriction sites by site-directed mutagenesis based on overlap extension PCR. Briefly, target mutation (GAATTC→GAGTTC, ACTAGT→GCTAGT , CTGCAG→CTCCAA, ) was introduced into primers (ompC-m-A/B/C/D/E/F/G/H in table 5-2), and the four previous PCR products(ompC-AB, ompC-CD, ompC-EF, ompC-GH) were used as template for the second PCR, and the two previous PCR products(ompC-AD, ompC-EH) were used as template for the third PCR. The final PCR segment with target mutation sites was then cloned into pMD18-T vector for sequencing. The three PCR systems were listed in table 5-4, 5-5, 5-6.

Table 5-4: Reaction System of the 1st PCR

Table 5-5: Reaction System of the 2nd PCR

Table 5-6: Reaction System of 3rd PCR

Step 3: Insertion of the Standard Parts into plasmid backbone-pSB1C3

pSB1C3 backbone and the standardized parts was digested with EcoRI and PstI and then retrieved and purified with kits from Omega. pSB1C3 and the standardized parts were then linked together to from new Biobricks.

Step 4 : Submission of New Standardized Parts

After completing all the validation, the four parts were submitted to iGEM official organization in the early October and arrived in New York in 8th Oct. The information was listed in the table 5-7.