From 2014.igem.org

Revision as of 08:32, 17 October 2014

HOME PROJECT PARTS TEAM Policy & Practice SAFETY

Our Project

We make various systems by interaction of cell-cell communication. We keep one function in one E.coli. This means to make simple plasmid. The following is one example. We’d like to collect cadmium in water. Therefore we use two kinds of E.coli. One catches Cadmium. The other attracts all E.coli by using chemoattractant. Catches E.coli displays metallothionein a protein combines a heavy metal. Cadmium is a kind of heavy metal. The other synthesizes aspartic acid (Asp) one kind of chemoattractant. All E.coli gather in the E.coli synthesizes Asp. To use these E.coli, finally cadmium will be caught.

When collect cadmium in the water, if use only catching E.coli,they go away from cadmium. Because they have negative chemotaxisin contrast with cadmium. Consequently they don't catch cadmium very much. So it needs to gather for cadmium.

Modeling

We consigned modeling of our project to UT-Tokyo.They readily compiled with our requests. Their model is ideal.We really appreciate their jobs We wish a friendly relationship with UT-Tokyo.Thank you so much!! The detail of their jobs are lists below!!

Fig.1
This is random walk of E.coli on swarming plate.The vertical axis means arbitrary unit.The horizontal axis means spatial axis.

Fig.2
This is positive chemotaxis by E.coli.Assuming that distill aspartate center of swarming plate. E.coli gather to distilled point.

Fig.3
This is negativeChemotaxis by E.coli.Assuming that distill cadmium center of swarming plate. E.coli run away from distilled point.

Fig.4
This model means our project. Assuming that distill cadmium (spatial axis 500). E.coli run away from distilled point (spatial axis 350~450 and 550~650). At that time E.coli`s cadmium promoter is operate. Asparatate is produced by E.coli'

Meｍberｓ of UT-tokyo

Method

Bold text

Medium

Trypton Broth

Trypton 10g/L

NaCl 10g/L

H2O 1L

Wash medium

Potassium phosphate buffer (pH 7.0), 10⁻²M

MgSO₄, 10⁻³M

potassium ethylenediaminetetraacetate (EDTA), 10⁻⁴M

Chemotaxis medium

Potassium phosphate buffer (pH 7.0), 10⁻²M

potassium EDTA, 10⁻⁴M

L-methionine 10⁻⁶M

Synthesis medium

Sodium hydrogen fumarate 46g/L

Ammonium chloride 17.8g/L

Magnesium sulfate 7 hydrate 0.25g/L

H₂O 1L

Ph8.5with sodium hydrogen

LB medium

Tryptone 10g/L

Yeast extract 5g/L

NaCl 10g/L

(agar 15g/L)

H₂O 1L

2×YT medium

Tripton 16g/L

Yeast extract 10g/L

NaCl 5g/L

(agar 15g/L)

H₂O 1L

M9 swarming Agar

20 % (v/v) 5×M9 salt

1.25 % (v/v) glycerol

0.3 % (v/v) agar

0.1 % (v/v) 0.136M CaCl2 solution (after autoclave)

0.1 % (v/v) 1M MgSo4 solution (after autoclave)

0.03 % (w/v) 1mM thiamine (after autoclave)

stir until dissolved

5×M9 stock solution

6.4 % (w/v) Na2HPO4

1.5 % (w/v) KH2PO4

0.25 % (w/v) NaCl

0.5 % (w/v) NH4Cl

Aspartate synthesis

E.coli K12 transformed with CdP-R.B.S-AspA-d.Ter (BBa_K1342001) previous cultured with cadmium in LB medium (250μM) in 37℃ for 12hr at 120rpm. Adjust Cell mass (OD1.0) and therefor centrifuged 4000rpm for 20 min. Cell pellets ware activated in synthesis medium in 37℃ for 2hr at 120rpm/min.

SDS PAGE

・Preculture E.coli holding a plasmid containing a target gene or nomal E.coli.
・Measure OD600 0.6-1.0
・the expression of fusion protein by isopropylthio-β-D-galactoside (IPTG)　and Cd2+ soln.
・Transfer a sample a 200 µl in a microcentrifuge tube
・Centrifuge at 13,000rpm for a minute at 4℃
・Discard supernatant quantitative
・Store pellet at -20 °C
・Thaw pellet and resupend in Sample Buffer (100 µL 1xSample Buffer per samples)
・Heat for 5 minutes at 98 °C
・Centrifuge at 13,000rpm for 10 minutes at 4℃
・Transfer supernatant to a new microcentrifuge tube
・Analyze samples by SDS-PAGE.(Use 20 µL per samples)

TLC assay

We analyzed L-aspartate by thin-layer chromatography (TLC). The equal volume of the supernatant of synthesis medium was added with 7 mg/mL 5-Dimethylamino naphthalene-1-sulfonyl Chloride (dissolved in acetone) and was incubated for more than 30 min at room temperature. Two microliters of the reactant was spotted on a TLC silica plate, and was developed in a mixture of ethyl acetate, pyridine, water, and acetic acid(162：21：11：6 v/v).

Chemotaxis Assay

Introduction

Chemotaxis of E. coli against asparate was assayed by two methods. One was swarming assay, and the other was capillary assay. In swarming assay, we have used "sawaming plate", a solid culture plate containing lower concentration of agar, on that plate, E. coli can swim. We have used capillary containing aspartate. The capillary was set in chemotaxis medium containing motile E. coli. The number of E. coli attracted to asparate in capillary was determined by colony formation on LB plate.

Swarmming Assay

E. coli JM109 cultured at 30℃ with 50 rpm was need.
We assayed chemotaxis of E. coli against Cdim and for Aspartate with soft agar, that is M9 synthetic medium.
Because the concentration of soft agar medium is low, E. coli can swim on the agar plate.

Plotocol

1. A inoculate of the culture was spotted on the center of agar plate.

2. 10mM L-Aspartate (40μl) or 100mM Cd solution (4μl) was spotted on 25mm distant from the center of 0.3 % agar plate.

3. The plate was standed 5 min at RT.

4. The plate was incubated at 30℃.

Capillary Assay

Object

Assay the chemotaxis of E. coli against aspartarte with capillary.

Plotocol

1. Preculture E.　coli in tripton broth at 30 ℃ for 12 hr with shaking (50 rpm).

2. Check the motility of E. coli by microscope (× 800).

3. Dilute the E. coli culture (200 μL) with tripton broth (20 mL).

4. Incubate at 30 ℃ with shaking (50 rpm) until log phase (OD600 = ～ 0.2).

5. Aliquote (500 μL) of the culture was centrifuged at 25℃ for 10 min at 3400 x G.

6. Dicard the supernatant.

7. Resuspend the pellets gently with wash medium (50 μL).

8. Repeat 5~7 step.

9. Resuspend the pellets gently with chemotaxis medium (500 μL).

10. Check the motility of E. coli by microscope (× 800).

11. Aliquote (100 μL) of E. coli suspended in chemotaxis medium was set into chamber apparatus.

12. Prepare asparate capillary and negative control capillary that contain 1 μL of chemotaxis medium with and without 10 mM aspartate, respectively.

13. Both capillaries (asparate capillary and negative control capillary) were set into chamber apparatus.

14. Incubate at 30 ℃ for 90 mim.

15. The chemotaxis medium in capillary was collected in 100 μL of fresh chemotaxis medium.

16. All chemotaxis medium containing attracted E. coli was plated on LB plate.

17. Incubate at 37 ℃ for 12 hr.

18. Count the number of colony.

Result & Discussion

TLC Assay

Analysis of aspartic acid synthesized by E. coli JM109/[http://parts.igem.org/wiki/index.php?title=Part:BBa_K1342001 BBa_K1342001] by thin-layer chromatography (TLC) Lane: 1, 2 no addition into culture (diluted 1:50 and 1:100 by synthesis medium, respectively) 3, additon of cadmium ion (250μM) 4, 5, 6 (diluted 1:50, 1:100 and 1:200 by synthesis medium, respectively)

fig.2
Estimation of aspartic acid content in spot Each intensity of spots indicating the content of aspartic acid, was estimated by using Image J. .

SDS PAGE

1. marker 2. 0hr 3. 0.5hr 4. 2hr 5. 6hr 6. 24hr 7. Marker marker:Precision Plus Protein Standards (BIO-RAD)

OD600=0.74 CdCl2 100μM/IPTG 1mM

Swarming Assay

Fig.1 L:Asp R:ddH2O
Culture time: 108 hours 30 minutes (4days and 12 hours 30 minutes)
It is 4.3cm from the edge of plate to the center
It is 2.5cm from the center of the plate to the place that I spotted.

Circle is larger the medium which I spotted Aspartate into than the medium which I spotted ddH20 into.
It is that E. coli swims for Aspartate to understand from photographs of L and R.
E. coli swim the side where I spotted Aspartate in.
I think that E. coli may have positive chemotaxis for Aspartate than these two (Aspartate and ddH2O) control experiment.

Fig.2 L:Cd R:ddH2O
Culture time: 109 hours 50 minutes (4days and 13 hours 50 minutes)
It is 4.3cm from the edge of plate to the center
It is 2.5cm from the center of the plate to the place that I spotted.

Circle is smaller the medium which I spotted Cdim into than the medium which I spotted ddH20 into.
It is that E. coli swims against Cdim to understand from photographs of L and R.
In the side where I spotted Cd in, circle becomes dented.
I think that E. coli may have negative chemotaxis for Cd than these two (Cd and ddH2O) control experiment.

Capillary Assay

Result

Fig.1 Left : Aspartate, Right : control
There were 13 colonies on Asp plate. One other plate has 1326 colonies.

Discussion

Future work

Reference

[1][http://www.ncbi.nlm.nih.gov/pubmed/12480884 P. Ferianc.“Regulation of yodA encoding a novel cadmium-induced protein in Escherichia coli”Microbiology, 148, (2002), 3801–3811]
[2]iGEM Goettingen.“Homing Coli”(2012)
[3][http://www.ccbi.cam.ac.uk/iGEM2006/index.php/Protocols#Autoclaving_stock_solutions_or_glassware_.28sterilisation.29 iGEM University Of Cambridge.“Making swimming Agar”(2006)]
[4]iGEM UT-Tokyo.“L-aspartate chemotaxis assay”(2011)
[5][http://ecocyc.org/ Keseler et al. “EcoCyc”(2013)]
[6][http://www.ncbi.nlm.nih.gov/pubmed/17650676 A. Chmiel.“Selection and Activation of Escherichia coli Strains for L-aspartic Acid Biosynthesis”Polish Journal of Microbiology, Vol. 56, 2, (2007), 71-76]
[7][http://www.ncbi.nlm.nih.gov/pubmed/4632978 J.ADLER.“A Method for Measuring Chemotaxis and Use of the Method to Determine Optimum Conditions for Chemotaxis by Escherichia coli”Journal of General Microbiology, 74 ( 1973), 77-91]
[8][http://www.ncbi.nlm.nih.gov/pmc/articles/PMC106306/ Kristensen et al.“New Unstable Variants of Green Fluorescent Protein for Studies of Transient Gene Expression in Bacteria”Applied and Environmental Microbiology, Vol. 64, 6, (1998), 2240–2246]