Team:UCL/Humans/Attributions

From 2014.igem.org

(Difference between revisions)

Latest revision as of 20:27, 15 April 2015

Goodbye Azodye UCL iGEM 2014

Acknowledgements & Attributions

The UCL iGEM 2014 team would like to thank all our advisors who have assisted us throughout the project, and without whom the project would not have been possible. We would also like to thank all everyone else who has helped us realise this project, be it through invaluable advice or providing DNA, equipment, or other materials. These contributions have helped us enormously. All work on this wiki was carried out and all data collected by us unless stated otherwise. For a full list of our collaborations & acknowledgements, please visit our collaborations page.

Our work and achievements can be split into 6 categories, each representing the different aspects of our immense project. During the early days of our project, we identified the different sub-teams we would be working in, and since then a lot of members have contributed to almost all aspects of the project.

Lab: BioBricks

We would like to thank the UCL Biochemical Engineering department for providing us with the guidance, facilities and resources to complete our lab work.

Microbial & Enzyme Technology Lab led by Dr Lígia O. Martins at the Universidade Nova de Lisboa for providing us plasmid and advice for our work on azo dyes degradation

Team members:

Georgia Bondy, Daniel de la Torre, Adam Denyer, Edoardo Gianni, Yan Kay Ho, Sohaila Jalali, Sanjay Joshi, Behzad Karkaria, Ning Lu, Tanel Ozdemir

Contributions from:

Darren Nesbeth, Vitor Pinhiero, Helina Marshall, Alex Templar, Des Schofield, Archie Melbourne, Julian Albers

Graphics & Design

We would like to thank Vista Print for helping us produce our business cards, and we are also grateful for the printing facilities provided by UCL and the UCL Biochemical Engineering department.

Team members:

Oran Maguire, Pamela Niem

Contributions from:

Central St Martins: Cameo Bondy, Barbara Czepiel. The Slade: Jo Volley. Natsai Audrey, Linden Gledhill.

Policy & Practices

We would like to thank the UCL Biochemical Engineering department for providing us with the guidance, facilities and resources to complete our lab work.

Team members:

Alberto Aparicio, Kevin Keyaert, Alex Bates, Georgia Bondy, Edoardo Gianni

Contributions from:

Julian Albers, Phillip Boeing, Andy Cheng, KaiCheng Kiew, Archie Melbourne, Bethan Wolfenden

Modelling & General Science

We would like to thank the UCL Biochemical Engineering and the Mathematics and Physical Sciences department for providing us with the guidance, facilities and resources to complete our lab work.

Team members:

Miriam Leon, Rob Stanley, Georgia Bondy

Web & Communications

We would like to thank our 1000+ followers on Facebook, Twitter & Tumblr, as well as acknowledge the work of programmers whose open source work we utilised in the development of this Wiki. This wiki contains work sourced from Font Awesome and jQuery plugins, we are thankful to have been able to utilise these features. We extend our gratitude to the DTU-Denmark (2011) and TU Munich (2010) teams for the tutorials they provided us from their respective wikis. Additional thanks to past UCL iGEM members, who helped us develop the design and concept for our Wiki.

Team members:

Sanjay Joshi, Adam Denyer

Contributions from:

Yan Kay Ho, Lewis Moffat

Bioprocess Engineering

We would like to thank the UCL Biochemical Engineering department for providing us with the guidance, facilities and resources to complete our work. Additional thanks go out to Professor Eli Keshavarz-Moore, Dr Frank Baganz, Professor Gary Lye, and Dr Yuhong Zhou; for the advice and guidance they provided us throughout our project. We have also collaborated with Godfrey Kyazze, a lecturer at University of Westminster. We would also like to acknowledge the respective authors of the research papers we studied.

Team members:

Maurice Bertrand, Sanjay Joshi, Joy Faucher

Microfluidics

We would like to thank the UCL Biochemical Engineering department for providing us with the guidance, facilities and resources to complete our lab work.

Team members:

Lewis Brayshaw, David Jackson Contributions from:
Joy Faucher, Sanjay Joshi, Edoardo Gianni

@@ Line 6: / Line 6: @@
 <!--- This is the coding for the Attributions Header Image (ask sanjay before altering this) --->
-<div class="pageTitle">
+<div id="TopGapO"></div>
 <div id="BPimagewrapperHeader">
-<img src="https://static.igem.org/mediawiki/2014/8/80/UCLAttributionsHeader.JPG" width="100%" height="auto" alt="Attributions" /></div>
+<img src="https://static.igem.org/mediawiki/2014/8/8f/OAttributions_Bannero.jpg" width="100%" height="auto" alt="Attributions" /></div>
 <div class="textArena">
-<!--- This is the coding for the tabs (ask sanjay before altering this) --->
-<ul class="tabs">
-    <li><a href="#view1">Overview</a></li>
-    <li><a href="#view2">Lab</a></li>
-    <li><a href="#view3">Graphics</a></li>
-    <li><a href="#view4">Human Practice</a></li>
-    <li><a href="#view5">Modelling</a></li>
-    <li><a href="#view6">Web</a></li>
-    <li><a href="#view7">Bioprocessing</a></li>
-</ul>
-<div class="tabcontents">
 <!--- This is the first section --->
 <div id="view1">
-<div class="textTitle"><h4>Acknowledgements & Attributions</h4></div>
+<div class="textTitle"><h3>Acknowledgements & Attributions</h3></div><br>
 <!-- This is the main text. Anything in a <p>TEXT</p> is a paragraph and will be spaced appropriately-->
-<p>The UCL iGEM 2014 team would like to thank all our advisors who have assisted us throughout the project, and without whom the project would not have been possible. We would also like to thank all everyone else who has helped us realise this project, be it through invaluable advice or providing DNA, seeds, or other materials. These contributions have helped us enormously. All work on this wiki was carried out and all data collected by us unless stated otherwise. For a full list of our collaborations & acknowledgements, please visit our <a href="https://2014.igem.org/Team:UCL/Humans/Collab">collaborations</a> page.</p><br>
+<p>The UCL iGEM 2014 team would like to thank all our advisors who have assisted us throughout the project, and without whom the project would not have been possible. We would also like to thank all everyone else who has helped us realise this project, be it through invaluable advice or providing DNA, equipment, or other materials. These contributions have helped us enormously. All work on this wiki was carried out and all data collected by us unless stated otherwise. For a full list of our collaborations & acknowledgements, please visit our <a href="https://2014.igem.org/Team:UCL/Humans/Collab">collaborations</a> page.</p><br>
 <!-- a <br> tag by itself creates a one line space between paragraphs -->
 <!-- an <a href="url of link">TEXT</a> turns the text into a link to the url you put in -->
 <!---TABLE START--->
 <table style="width:100%"><col width="16%"><col width="16%"><col width="16%"><col width="16%"><col width="16%"><col width="16%"><tr>
-<td><a href="#view2"><img src="https://static.igem.org/mediawiki/2014/c/c3/Team_Icons-01.png" width=100% alt="Lab"></a></td>
+<td><img src="https://static.igem.org/mediawiki/2014/c/c3/Team_Icons-01.png" width=100% alt="Lab"></td>
-<td><a href="#view3"><img src="https://static.igem.org/mediawiki/2014/a/a3/Team_Icons-02.png" width=100% alt="Graphics & Design"></a></td>
+<td><img src="https://static.igem.org/mediawiki/2014/a/a3/Team_Icons-02.png" width=100% alt="Graphics & Design"></td>
-<td><a href="#view4"><img src="https://static.igem.org/mediawiki/2014/b/ba/Team_Icons-03.png" width=100% alt="Human Practices"></a></td>
+<td><img src="https://static.igem.org/mediawiki/2014/b/ba/Team_Icons-03.png" width=100% alt="Human Practices"></td>
-<td><a href="#view5"><img src="https://static.igem.org/mediawiki/2014/4/4c/UCLTeam_Icons-04.png" width=100% alt="Modelling"></a></td>
+<td><img src="https://static.igem.org/mediawiki/2014/4/4c/UCLTeam_Icons-04.png" width=100% alt="Modelling"></td>
-<td><a href="#view6"><img src="https://static.igem.org/mediawiki/2014/6/6a/UCLTeam_Icons-05.png" width=100% alt="Web & Communication"></a></td>
+<td><img src="https://static.igem.org/mediawiki/2014/6/6a/UCLTeam_Icons-05.png" width=100% alt="Web & Communication"></td>
-<td><a href="#view7"><img src="https://static.igem.org/mediawiki/2014/b/be/Team_Icons-06.png" width=100% alt="Bioprocessing"></a></td>
+<td><img src="https://static.igem.org/mediawiki/2014/b/be/Team_Icons-06.png" width=100% alt="Bioprocessing"></td>
 </tr></table>
 <!---TABLE END--->
-<p>Our work and achievements can be split into 6 categories, each representing the different aspects of our immense project. During the early days of our project, we identified the different subteams we would be working in, and since then a lot of members have contributed to almost all aspects of the project. To view what our project has encompassed and who has contributed accordingly, click on the tabs above.  </p>
+<p>Our work and achievements can be split into 6 categories, each representing the different aspects of our immense project. During the early days of our project, we identified the different sub-teams we would be working in, and since then a lot of members have contributed to almost all aspects of the project.<br><br></p>
 </div>
-<!--- This is the second section --->
-<div id="view2">
-<div class="textTitle"><h4>Why Microfluidics?</h4></div>
+<!--- This is the second section --->
+<div class="SCJBBHIGHLIGHT">
+<h3>Lab: BioBricks</h3>
 <!-- This is the main text. Anything in a <p>TEXT</p> is a paragraph and will be spaced appropriately-->
-<p>Since our project involves designing a novel <a href="https://2014.igem.org/Team:UCL/Science/Bioprocessing">bioprocess</a> using whole-cell biocatalysts, microfluidics presents us with a unique and extremely useful advantage. When it comes to identifying, developing and optimising reactor designs and reaction constraints, this can be performed with ease and with low reagent cost as all variables are scaled down to a micro-level. Most importantly, the scale-down can be carried out without losing any of the accuracy or quantification of data output; this is due the number of sensors and control mechanisms which can be integrated into the microfluidic system.</p><br>
+<p>We would like to thank the UCL Biochemical Engineering department for providing us with the guidance, facilities and resources to complete our lab work.<br><br>
-<!---TABLE START--->
+<a href="http://www.itqb.unl.pt/martins">Microbial & Enzyme Technology Lab</a> led by Dr Lígia O. Martins at the Universidade Nova de Lisboa for providing us plasmid and advice for our work on azo dyes degradation
-<table style="width:100%"><col width="60%"><col width="40%"><tr><td>
+<br><br>
-<!-- This is the video. Change the align attribute to left to move the video to the left-->
+<h4><b>Team members:</b></h4> Georgia Bondy, Daniel de la Torre, Adam Denyer, Edoardo Gianni, Yan Kay Ho, Sohaila Jalali, Sanjay Joshi, Behzad Karkaria, Ning Lu, Tanel Ozdemir
-<div class="video-wrapper">
+<br>
-<iframe width="600" height="380" style="padding:0.5%; border:0.5% #000;" src="//www.youtube.com/embed/0OlMfq5WT6k" frameborder="0" allowfullscreen align="left"></iframe></div></td><td>
+<h4><b>Contributions from:</b></h4> Darren Nesbeth, Vitor Pinhiero, Helina Marshall, Alex Templar, Des Schofield, Archie Melbourne, Julian Albers</p>
-<!-- This is the video. Change the align attribute to left to move the video to the left-->
-<div class="video-wrapper">
-<iframe width="600" height="380" style="padding:0.5%; border:0.5% #000;" src="//www.youtube.com/embed/buf--n4dcUs" frameborder="0" allowfullscreen align="right"></iframe></div></td></tr></table>
-<!---TABLE END--->
-<br><!-- div is a divisor tag that just separates content. This class makes the paragraph in it black-->
-<div class="SCJMFHIGHLIGHT">
- <p>
-<img src="https://static.igem.org/mediawiki/2014/4/49/Microfluidic_set-up_iGEM.JPG" width=35% style="float:right;margin:0 0 0 10px;">
-The videos above were recorded in the UCL ACBE Microfluidics labs by members of our team. The video on the left is a demonstration of laminar flow across a T-junction microfluidic device. The video on the right demonstrates one of the methods of mixing made possible by microfluidics (herring bone channels etched into the chip).
-<br><br>The image on the right displays the microfluidics set-up used by our iGEM team. This device and equipment is provided for by the UCL microfluidics lab.</p></div>
 </div>
+<br>
 <!--- This is the third section --->
-<div id="view3">
+<div class="SCJGDHIGHLIGHT">
+<h3>Graphics & Design</h3>
-<div class="textTitle"><h4>Our Design Process</h4></div>
 <!-- This is the main text. Anything in a <p>TEXT</p> is a paragraph and will be spaced appropriately-->
-<div class="video-wrapper">
+<p>We would like to thank Vista Print for helping us produce our business cards, and we are also grateful for the printing facilities provided by UCL and the UCL Biochemical Engineering department.
-<iframe width="600" height="380" style="padding:1%; border:0.5% #000;" src="//www.youtube.com/embed/6UNpqpMS5vA" frameborder="0" allowfullscreen align="right"></iframe></div>
+<br><br>
-<p>We will use rapid polymer prototyping techniques to generate microfluidic chips that will allow us to test our reaction and aid in the construction of a realistic bioprocess, which can be successfully scaled-up for industrial use. As we optimise and change our bioprocess, we can also quickly design new microfluidic chips that can mimic its development on a micro-scale. For example, it is our goal to integrate multiple downstream steps, such as chromatography, in order to isolate potential useful products. Demonstrating this in a microfluidic system is less time-consuming and far more cost effective than doing so at a larger scale.</p><br>
+<h4><b>Team members:</b></h4> Oran Maguire, Pamela Niem</p>
-<p>For our microfluidic bioreactor, we will be using a magnetic free floating bar as our mixing system. This is an effective method of mixing at a microfluidic scale, as demonstrated in the video on the right. This video is of a microfluidic chemostat bioreactor designed by Davies et al. 2014 UCL, using a free-floating bar to mix two dyes.</p><br>
+<br><h4><b>Contributions from:</h4></b> Central St Martins: Cameo Bondy, Barbara Czepiel. The Slade: Jo Volley. Natsai Audrey, Linden Gledhill. </p>
-<div class="SCJMFHIGHLIGHT"><p>
+</div>
-<img src="https://static.igem.org/mediawiki/2014/thumb/b/b8/AutoCAD_Device.png/800px-AutoCAD_Device.png" width=32%>
-<img src="https://static.igem.org/mediawiki/2014/thumb/7/71/MicrofluidicsDevice.jpg/800px-MicrofluidicsDevice.jpg" width=32%  style="PADDING-LEFT: 2%" "PADDING-RIGHT: 3%">
-<img src="https://static.igem.org/mediawiki/2014/1/1e/Fluidics_Chip.JPG" width=32% align="right"><br>
-Above are some examples of the microfluidics devices developed by our team for use in the lab at the UCL ACBE. The devices are initially designed using AutoCAD (2D and 3D computer-aided design software), once the designs are finalised they can be 3D-printed using the facilities provided by the UCL Institute of Making and UCL ACBE; allowing our bioprocess and laboratory team to experiment and improve designs.</p></div>
 <br>
-<p><img src="https://static.igem.org/mediawiki/2014/4/4c/UCLAc-2014-logo.png" align="right" width="10%">
-An example of one of our microfluidic devices designed on AutoCAD can be downloaded <a href="https://static.igem.org/mediawiki/2014/f/fa/UCL_iGEM_2014_Microfluidics_Device_Design.dwg.zip">here</a>. This device utilises the basic concept of mixing the cells and dyes, producing a single output stream; much alike to the <a href="https://2014.igem.org/Team:UCL/Science/Bioprocessing">bioprocessing</a> concept. During the course of designing the microfluidic device, several key considerations must be taken into account: ability to withstand high pressure without leakage; materials of construction to be inert and transparent; size constraints of inlet and outlet piping; ability to accurately 3D-print the device.</p><br>
-</div>
 <!--- This is the fourth section --->
-<div id="view4">
+<div class="SCJPPHIGHLIGHT">
+<h3>Policy & Practices</h3>
-<div class="textTitle"><h4>Why Microfluidics?</h4></div>
 <!-- This is the main text. Anything in a <p>TEXT</p> is a paragraph and will be spaced appropriately-->
-<p>Since our project involves designing a novel <a href="https://2014.igem.org/Team:UCL/Science/Bioprocessing">bioprocess</a> using whole-cell biocatalysts, microfluidics presents us with a unique and extremely useful advantage. When it comes to identifying, developing and optimising reactor designs and reaction constraints, this can be performed with ease and with low reagent cost as all variables are scaled down to a micro-level. Most importantly, the scale-down can be carried out without losing any of the accuracy or quantification of data output; this is due the number of sensors and control mechanisms which can be integrated into the microfluidic system.</p><br>
+<p>We would like to thank the UCL Biochemical Engineering department for providing us with the guidance, facilities and resources to complete our lab work.
-<!---TABLE START--->
+<br><br>
-<table style="width:100%"><col width="60%"><col width="40%"><tr><td>
+<b><h4>Team members:</h4></b> Alberto Aparicio, Kevin Keyaert, Alex Bates, Georgia Bondy, Edoardo Gianni
-<!-- This is the video. Change the align attribute to left to move the video to the left-->
+<br><h4><b>Contributions from:</h4></b> Julian Albers, Phillip Boeing, Andy Cheng, KaiCheng Kiew, Archie Melbourne, Bethan Wolfenden</p>
-<div class="video-wrapper">
-<iframe width="600" height="380" style="padding:0.5%; border:0.5% #000;" src="//www.youtube.com/embed/0OlMfq5WT6k" frameborder="0" allowfullscreen align="left"></iframe></div></td><td>
-<!-- This is the video. Change the align attribute to left to move the video to the left-->
-<div class="video-wrapper">
-<iframe width="600" height="380" style="padding:0.5%; border:0.5% #000;" src="//www.youtube.com/embed/buf--n4dcUs" frameborder="0" allowfullscreen align="right"></iframe></div></td></tr></table>
-<!---TABLE END--->
-<br><!-- div is a divisor tag that just separates content. This class makes the paragraph in it black-->
-<div class="SCJMFHIGHLIGHT">
- <p>
-<img src="https://static.igem.org/mediawiki/2014/4/49/Microfluidic_set-up_iGEM.JPG" width=35% style="float:right;margin:0 0 0 10px;">
-The videos above were recorded in the UCL ACBE Microfluidics labs by members of our team. The video on the left is a demonstration of laminar flow across a T-junction microfluidic device. The video on the right demonstrates one of the methods of mixing made possible by microfluidics (herring bone channels etched into the chip).
-<br><br>The image on the right displays the microfluidics set-up used by our iGEM team. This device and equipment is provided for by the UCL microfluidics lab.</p></div>
 </div>
+<br>
 <!--- This is the fifth section --->
-<div id="view5">
+<div class="SCJMGHIGHLIGHT">
+<h3>Modelling & General Science</h3>
-<div class="textTitle"><h4>Why Microfluidics?</h4></div>
 <!-- This is the main text. Anything in a <p>TEXT</p> is a paragraph and will be spaced appropriately-->
-<p>Since our project involves designing a novel <a href="https://2014.igem.org/Team:UCL/Science/Bioprocessing">bioprocess</a> using whole-cell biocatalysts, microfluidics presents us with a unique and extremely useful advantage. When it comes to identifying, developing and optimising reactor designs and reaction constraints, this can be performed with ease and with low reagent cost as all variables are scaled down to a micro-level. Most importantly, the scale-down can be carried out without losing any of the accuracy or quantification of data output; this is due the number of sensors and control mechanisms which can be integrated into the microfluidic system.</p><br>
+<p>We would like to thank the UCL Biochemical Engineering and the Mathematics and Physical Sciences department for providing us with the guidance, facilities and resources to complete our lab work.
-<!---TABLE START--->
+<br><br>
-<table style="width:100%"><col width="60%"><col width="40%"><tr><td>
+<b><h4>Team members:</h4></b> Miriam Leon, Rob Stanley, Georgia Bondy</p>
-<!-- This is the video. Change the align attribute to left to move the video to the left-->
-<div class="video-wrapper">
-<iframe width="600" height="380" style="padding:0.5%; border:0.5% #000;" src="//www.youtube.com/embed/0OlMfq5WT6k" frameborder="0" allowfullscreen align="left"></iframe></div></td><td>
-<!-- This is the video. Change the align attribute to left to move the video to the left-->
-<div class="video-wrapper">
-<iframe width="600" height="380" style="padding:0.5%; border:0.5% #000;" src="//www.youtube.com/embed/buf--n4dcUs" frameborder="0" allowfullscreen align="right"></iframe></div></td></tr></table>
-<!---TABLE END--->
-<br><!-- div is a divisor tag that just separates content. This class makes the paragraph in it black-->
-<div class="SCJMFHIGHLIGHT">
- <p>
-<img src="https://static.igem.org/mediawiki/2014/4/49/Microfluidic_set-up_iGEM.JPG" width=35% style="float:right;margin:0 0 0 10px;">
-The videos above were recorded in the UCL ACBE Microfluidics labs by members of our team. The video on the left is a demonstration of laminar flow across a T-junction microfluidic device. The video on the right demonstrates one of the methods of mixing made possible by microfluidics (herring bone channels etched into the chip).
-<br><br>The image on the right displays the microfluidics set-up used by our iGEM team. This device and equipment is provided for by the UCL microfluidics lab.</p></div>
 </div>
+<br>
 <!--- This is the sixth section --->
-<div id="view6">
+<div class="SCJWCHIGHLIGHT">
+<h3>Web & Communications</h3>
-<div class="textTitle"><h4>Why Microfluidics?</h4></div>
 <!-- This is the main text. Anything in a <p>TEXT</p> is a paragraph and will be spaced appropriately-->
-<p>Since our project involves designing a novel <a href="https://2014.igem.org/Team:UCL/Science/Bioprocessing">bioprocess</a> using whole-cell biocatalysts, microfluidics presents us with a unique and extremely useful advantage. When it comes to identifying, developing and optimising reactor designs and reaction constraints, this can be performed with ease and with low reagent cost as all variables are scaled down to a micro-level. Most importantly, the scale-down can be carried out without losing any of the accuracy or quantification of data output; this is due the number of sensors and control mechanisms which can be integrated into the microfluidic system.</p><br>
+<p>We would like to thank our 1000+ followers on Facebook, Twitter & Tumblr, as well as acknowledge the work of programmers whose open source work we utilised in the development of this Wiki. This wiki contains work sourced from Font Awesome and jQuery plugins, we are thankful to have been able to utilise these features. We extend our gratitude to the <a href="https://2011.igem.org/Team:DTU-Denmark/How_to_customize_an_iGEM_wiki">DTU-Denmark (2011)</a> and <a href="https://2010.igem.org/Team:TU_Munich/BeyondTheLab/WikiTutorial">TU Munich (2010)</a> teams for the tutorials they provided us from their respective wikis. Additional thanks to past UCL iGEM members, who helped us develop the design and concept for our Wiki.
-<!---TABLE START--->
+<br><br>
-<table style="width:100%"><col width="60%"><col width="40%"><tr><td>
+<b><h4>Team members:</h4></b> Sanjay Joshi, Adam Denyer
-<!-- This is the video. Change the align attribute to left to move the video to the left-->
+<br><h4><b>Contributions from:</h4></b> Yan Kay Ho, Lewis Moffat</p>
-<div class="video-wrapper">
-<iframe width="600" height="380" style="padding:0.5%; border:0.5% #000;" src="//www.youtube.com/embed/0OlMfq5WT6k" frameborder="0" allowfullscreen align="left"></iframe></div></td><td>
-<!-- This is the video. Change the align attribute to left to move the video to the left-->
-<div class="video-wrapper">
-<iframe width="600" height="380" style="padding:0.5%; border:0.5% #000;" src="//www.youtube.com/embed/buf--n4dcUs" frameborder="0" allowfullscreen align="right"></iframe></div></td></tr></table>
-<!---TABLE END--->
-<br><!-- div is a divisor tag that just separates content. This class makes the paragraph in it black-->
-<div class="SCJMFHIGHLIGHT">
- <p>
-<img src="https://static.igem.org/mediawiki/2014/4/49/Microfluidic_set-up_iGEM.JPG" width=35% style="float:right;margin:0 0 0 10px;">
-The videos above were recorded in the UCL ACBE Microfluidics labs by members of our team. The video on the left is a demonstration of laminar flow across a T-junction microfluidic device. The video on the right demonstrates one of the methods of mixing made possible by microfluidics (herring bone channels etched into the chip).
-<br><br>The image on the right displays the microfluidics set-up used by our iGEM team. This device and equipment is provided for by the UCL microfluidics lab.</p></div>
 </div>
+<br>
 <!--- This is the seventh section --->
-<div id="view7">
+<div class="SCJBPHIGHLIGHT">
+<h3>Bioprocess Engineering</h3>
-<div class="textTitle"><h4>Why Microfluidics?</h4></div>
 <!-- This is the main text. Anything in a <p>TEXT</p> is a paragraph and will be spaced appropriately-->
-<p>Since our project involves designing a novel <a href="https://2014.igem.org/Team:UCL/Science/Bioprocessing">bioprocess</a> using whole-cell biocatalysts, microfluidics presents us with a unique and extremely useful advantage. When it comes to identifying, developing and optimising reactor designs and reaction constraints, this can be performed with ease and with low reagent cost as all variables are scaled down to a micro-level. Most importantly, the scale-down can be carried out without losing any of the accuracy or quantification of data output; this is due the number of sensors and control mechanisms which can be integrated into the microfluidic system.</p><br>
+<p>We would like to thank the UCL Biochemical Engineering department for providing us with the guidance, facilities and resources to complete our work. Additional thanks go out to Professor Eli Keshavarz-Moore, Dr Frank Baganz, Professor Gary Lye, and Dr Yuhong Zhou; for the advice and guidance they provided us throughout our project. We have also <a href="https://2014.igem.org/Team:UCL/Humans/Collab">collaborated</a> with Godfrey Kyazze, a lecturer at University of Westminster. We would also like to acknowledge the respective authors of the research papers we studied.
-<!---TABLE START--->
+<br><br>
-<table style="width:100%"><col width="60%"><col width="40%"><tr><td>
+<b><h4>Team members:</h4></b>Maurice Bertrand, Sanjay Joshi, Joy Faucher</p>
-<!-- This is the video. Change the align attribute to left to move the video to the left-->
+</div>
-<div class="video-wrapper">
+<br>
-<iframe width="600" height="380" style="padding:0.5%; border:0.5% #000;" src="//www.youtube.com/embed/0OlMfq5WT6k" frameborder="0" allowfullscreen align="left"></iframe></div></td><td>
+<!--- This is the eighth section --->
-<!-- This is the video. Change the align attribute to left to move the video to the left-->
-<div class="video-wrapper">
-<iframe width="600" height="380" style="padding:0.5%; border:0.5% #000;" src="//www.youtube.com/embed/buf--n4dcUs" frameborder="0" allowfullscreen align="right"></iframe></div></td></tr></table>
-<!---TABLE END--->
-<br><!-- div is a divisor tag that just separates content. This class makes the paragraph in it black-->
 <div class="SCJMFHIGHLIGHT">
- <p>
+<h3>Microfluidics</h3>
-<img src="https://static.igem.org/mediawiki/2014/4/49/Microfluidic_set-up_iGEM.JPG" width=35% style="float:right;margin:0 0 0 10px;">
+<!-- This is the main text. Anything in a <p>TEXT</p> is a paragraph and will be spaced appropriately-->
-The videos above were recorded in the UCL ACBE Microfluidics labs by members of our team. The video on the left is a demonstration of laminar flow across a T-junction microfluidic device. The video on the right demonstrates one of the methods of mixing made possible by microfluidics (herring bone channels etched into the chip).
+<p>We would like to thank the UCL Biochemical Engineering department for providing us with the guidance, facilities and resources to complete our lab work.
-<br><br>The image on the right displays the microfluidics set-up used by our iGEM team. This device and equipment is provided for by the UCL microfluidics lab.</p></div>
+<br><br>
+<b><h4>Team members:</h4></b> Lewis Brayshaw, David Jackson
+<b><h4>Contributions from:</h4></b> Joy Faucher, Sanjay Joshi, Edoardo Gianni</p>
 </div>
-</div>
 </div>
@@ Line 207: / Line 131: @@
 .widthCorrect {
 width:100%;
-}
-div.SCJMFHIGHLIGHT p {
-        color: #fff;
-	border: solid 4px #F7931E;
-	background-color: rgb(117, 84, 84);
-	display: table;
-	padding: 1%;
-	margin: 1px 1px 0px 1px;
 }
 /*=========Object Alignment Classes=============*/
@@ Line 241: / Line 156: @@
 th, td {
      padding: 5px;
+}
+/*=========Top Gap div id from Oran=============*/
+#TopGapO {
+height: 70px;
+width: 100%;
+background: black;
+}
+/*=========Border divs=============*/
+div.SCJBBHIGHLIGHT {
+        color: #fff;
+	border: solid 4px #F7931E;
+        border-radius: 10px;
+	background-color: #000;
+	display: table;
+	padding: 1%;
+	margin: 1px 1px 0px 1px;
+        box-shadow: 10px 10px 5px #888888;
+        width:100%;
+}
+div.SCJBBHIGHLIGHT h3 {
+        color: #FFF;
+        margin: 0;
+}
+div.SCJBBHIGHLIGHT a {
+        color: #F7931E;
+}
+div.SCJBBHIGHLIGHT h4 {
+        color: #FFF;
+        margin: 0;
+}
+div.SCJBPHIGHLIGHT {
+        color: #fff;
+	border: solid 4px #2B8838;
+        border-radius: 10px;
+	background-color: #000;
+	display: table;
+	padding: 1%;
+	margin: 1px 1px 0px 1px;
+        box-shadow: 10px 10px 5px #888888;
+        width:100%;
+}
+div.SCJBPHIGHLIGHT h3 {
+        color: #FFF;
+        margin: 0;
+}
+div.SCJBPHIGHLIGHT h4 {
+        color: #FFF;
+        margin: 0;
+}
+div.SCJBPHIGHLIGHT a {
+        color: #2B8838;
+        margin: 0;
+}
+div.SCJPPHIGHLIGHT {
+        color: #fff;
+	border: solid 4px #FF0000;
+        border-radius: 10px;
+	background-color: #000;
+	display: table;
+	padding: 1%;
+	margin: 1px 1px 0px 1px;
+        box-shadow: 10px 10px 5px #888888;
+        width:100%;
+}
+div.SCJPPHIGHLIGHT h3 {
+        color: #FFF;
+        margin: 0;
+}
+div.SCJPPHIGHLIGHT h4 {
+        color: #FFF;
+        margin: 0;
+}
+div.SCJGDHIGHLIGHT {
+        color: #fff;
+	border: solid 4px #D3145A;
+        border-radius: 10px;
+	background-color: #000;
+	display: table;
+	padding: 1%;
+	margin: 1px 1px 0px 1px;
+        box-shadow: 10px 10px 5px #888888;
+        width:100%;
+}
+div.SCJGDHIGHLIGHT h3 {
+        color: #FFF;
+        margin: 0;
+}
+div.SCJGDHIGHLIGHT h4 {
+        color: #FFF;
+        margin: 0;
+}
+div.SCJMGHIGHLIGHT {
+        color: #fff;
+	border: solid 4px #FDEE1F;
+        border-radius: 10px;
+	background-color: #000;
+	display: table;
+	padding: 1%;
+	margin: 1px 1px 0px 1px;
+        box-shadow: 10px 10px 5px #888888;
+        width:100%;
+}
+div.SCJMGHIGHLIGHT h3 {
+        color: #FFF;
+        margin: 0;
+}
+div.SCJMGHIGHLIGHT h4 {
+        color: #FFF;
+        margin: 0;
+}
+div.SCJWCHIGHLIGHT {
+        color: #fff;
+	border: solid 4px #29AAE3;
+        border-radius: 10px;
+	background-color: #000;
+	display: table;
+	padding: 1%;
+	margin: 1px 1px 0px 1px;
+        box-shadow: 10px 10px 5px #888888;
+        width:100%;
+}
+div.SCJWCHIGHLIGHT h3 {
+        color: #FFF;
+        margin: 0;
+}
+div.SCJWCHIGHLIGHT h4 {
+        color: #FFF;
+        margin: 0;
+}
+div.SCJWCHIGHLIGHT a {
+        color: #29AAE3;
+        margin: 0;
+}
+div.SCJMFHIGHLIGHT {
+        color: #fff;
+	border: solid 4px #F7931E;
+        border-radius: 10px;
+	background-color: #000;
+	display: table;
+	padding: 1%;
+	margin: 1px 1px 0px 1px;
+        box-shadow: 10px 10px 5px #888888;
+        width:100%;
+}
+div.SCJMFHIGHLIGHT h3 {
+        color: #FFF;
+        margin: 0;
+}
+div.SCJMFHIGHLIGHT h4 {
+        color: #FFF;
+        margin: 0;
 }
 </style>