# Team:Valencia UPV/Modeling/diffusion

(Difference between revisions)
 Revision as of 22:58, 17 October 2014 (view source)Jpico (Talk | contribs)← Older edit Revision as of 02:01, 18 October 2014 (view source)Newer edit → Line 20: Line 20:
-

Sexual communication among moths is accomplished chemically by the release of an "odor" into the air. This "odor" consists of sexual pheromones.

+

Sexually communication among moths is accomplished chemically by the release of an "odor" into the air. This "odor" is the sexual pheromones.

-

Figure 1. Female moth releasing sex pheromones, and male moth.

+

Figure 1. Female moth releasing sex pheromones and male moth.

-

Pheromones are molecules that easily diffuse in the air. During the diffusion process, the random movement of gas molecules transport the chemical away from its source [1]. Diffusion processes are complex ones, and modeling them analytically and with accuracy is difficult. Even more when the geometry is not simple. For this reason, we decided to consider a simplified model in which pheromone chemicals obey to the heat diffusion equation. Then, the equation is solved using the Euler numeric approximation in order to obtain the spatial and temporal distribution of pheromone concentration.

+

Pheromones are molecules that can undergo a diffusion process in which the random movement of gas molecules transport the chemical away from its source (Sol I. Rubinow, Mathematical Problems in the Biological Sciences, Lecture 9). However, diffusion processes are complex, and modelling them analytically and with accuracy is difficult, even more when the geometry is not simple.

+

For this reason, we decided to consider a simplified model in which pheromone chemicals obey to the heat diffusion equation. Then, it is solved by the Euler numeric approximation in order to obtain the spatial and temporal distribution of pheromone concentration. See more about heat equation and mathematical expressions for Euler method.

-

Moths seem to respond to gradients of pheromone concentration to be attracted towards the source. Yet, there are other factors that lead moths to sexual pheromone sources, such as optomotor anemotaxis [2]. Moreover, increasing the pheromone concentration to unnaturally high levels may disrupt male orientation [3].

+

Moths seem to respond to gradients of pheromone concentration attracted towards the source, although there are other factors that lead moths sexually to pheromone sources such as optomotor anemotaxis (J. N. Perry and C. Wall , A Mathematical Model for the Flight of Pea Moth to Pheromone Traps Through a Crop). However, increasing the pheromone concentration to unnaturally high levels may disrupt male orientation (W. L. Roelofs and R. T. Carde, Responses of Lepidoptera to synthetic sex pheromone chemicals and their analogues). See more about the modeling of moth flight paths.

-

Using a modeling environment called Netlogo, we simulated the approximate moths behavior during the pheromone dispersion process. So, this will help us to predict moth response when they are also in presence of Sexy Plant.

+

Using a modeling environment called Netlogo, we simulate the approximate moths behavior during the pheromone dispersion process. So, this will help us to predict moth response when they are also in presence of our synthetic plants.

- + -
+ - + -

References

+ -
+ -
+ -
1. Sol I. Rubinow, Mathematical Problems in the Biological Sciences, chap. 9, SIAM, 1973
2. + -
3. J. N. Perry and C. Wall , A Mathematical Model for the Flight of Pea Moth to Pheromone Traps Through a Crop, Phil. Trans. R. Soc. Lond. B 10 May 1984 vol. 306 no. 1125 19-48
4. + -
5. W. L. Roelofs and R. T. Carde, Responses of Lepidoptera to synthetic sex pheromone chemicals and their analogues, Annual Review of Entomology + - Vol. 22: 377-405, 1977
6. + - + - + -
+
Line 52: Line 40:

Since pheromones are chemicals released into the air, we have to consider both the motion of the fluid and the one of the particles suspended in the fluid.

Since pheromones are chemicals released into the air, we have to consider both the motion of the fluid and the one of the particles suspended in the fluid.

-

The motion of fluids can be described by the Navier–Stokes equations. But the typical nonlinearity of these equations when there may exist turbulences in the air flow, makes most problems difficult or impossible to solve. Thus, attending to the particles suspended in the fluid, a simpler effective option for pheromone dispersion modeling consists in the assumption of pheromones diffusive-like behavior. +

The motion of fluids can be described by the Navier–Stokes equations. But the frequent nonlinearity of these equations makes most problems difficult or impossible to solve, since it may exists turbulences in the air flow [1]. Now attending to the particles suspended in the fluid, an option for pheromone dispersion modeling consists in the assumption of pheromones diffusive-like behavior. - That is, pheromones are molecules that can undergo a diffusion process in which the random movement of gas molecules transport the chemical away from its source [1].

+ That is: pheromones are molecules that can undergo a diffusion process in which the random movement of gas molecules transport the chemical away from its source [2].

-

There are two ways to introduce the notion of diffusion: either using a phenomenological approach starting with Fick's laws of diffusion  and their mathematical consequences, or a physical and atomistic one, by considering the random walk  of the diffusing particles [2].

+

There are two ways to introduce the notion of diffusion: either a phenomenological approach starting with Fick's laws of diffusion  and their mathematical consequences, or a physical and atomistic one, by considering the random walk  of the diffusing particles.

-

In our case, we decided to model our diffusion process using the Fick's laws. Thus, it is postulated that the flux goes from regions of high concentration to regions of low concentration, with a magnitude that is proportional to the concentration gradient. However, diffusion processes are complex, and modelling them analytically and with accuracy is difficult. Even more when the geometry is not simple (e.g. consider the potential final distribution of our plants in the crop field). For this reason, we decided to consider a simplified model in which pheromone chemicals obey the heat diffusion equation.

+

In our case, we decided to hold our diffusion process by the Fick's laws. So it is postulated that the flux goes from regions of high concentration to regions of low concentration, with a magnitude that is proportional to the concentration gradient. However, diffusion processes are complex, and modelling them analytically and with accuracy is difficult, even more when the geometry is not simple (final distribution of our plants in the crop field). For this reason, we decided to consider a simplified model in which pheromone chemicals obey to the heat diffusion equation.

- + -

Approximation

+ +

Approximation

+ - The diffusion equation is a partial differential equation that describes density dynamics + The '''diffusion equation''' is a partial differential equation which describes density dynamics in a material undergoing diffusion. It is also used to describe processes exhibiting in a material undergoing diffusion. It is also used to describe processes exhibiting - diffusive-like behavior, like in our case. The equation is usually written as: + diffusive-like behavior, like in our case. + + The equation is usually written as: $$\frac{\partial \phi (r,t) }{\partial t} = \nabla · [D(\phi,r) \nabla \phi(r,t)]$$ $$\frac{\partial \phi (r,t) }{\partial t} = \nabla · [D(\phi,r) \nabla \phi(r,t)]$$ - where $\phi(r, t)$ is the density of the diffusing material at location r and time t, and + where $\phi(r, t)$ is the density of the diffusing material at location r and time t and $D(\phi, r)$ is the collective diffusion coefficient for density $\phi$ at location $r$; and $D(\phi, r)$ is the collective diffusion coefficient for density $\phi$ at location $r$; and $\nabla$ represents the vector differential operator. $\nabla$ represents the vector differential operator. If the diffusion coefficient does not depend on the density then the equation is linear and If the diffusion coefficient does not depend on the density then the equation is linear and - $D$ is constant. Thus, the equation reduces to the linear differential equation: + $D$ is constant. Thus, the equation reduces to the following linear differential equation: $$\frac{\partial \phi (r,t) }{\partial t} = D \nabla^2 \phi(r,t)$$ $$\frac{\partial \phi (r,t) }{\partial t} = D \nabla^2 \phi(r,t)$$ - also called the '''heat equation'''. Making use of this equation we can write the pheromones chemicals diffusion equation with no + also called the '''heat equation'''. + + Making use of this equation we can write pheromones chemicals diffusion equation with no wind effect consideration as: wind effect consideration as: Line 83: Line 75: where c is the pheromone concentration,  $\Delta$ is the Laplacian operator, and $D$ is where c is the pheromone concentration,  $\Delta$ is the Laplacian operator, and $D$ is - the pheromone diffusion constant in the air.
+ the pheromone diffusion constant in air.

- If we consider the wind, we face a diffusion system with drift, and an advection term is + If we consider the wind, we face a diffusion system with drift and an advection term is added to the equation above. added to the equation above. $$\frac{\partial c }{\partial t} = D \nabla^2 c - \nabla \cdot (\vec{v} c )$$ $$\frac{\partial c }{\partial t} = D \nabla^2 c - \nabla \cdot (\vec{v} c )$$ - where $\vec{v}$ is the average ''velocity''. Thus, $\vec{v}$ + where $\vec{v}$ is the average ''velocity'' that the quantity is moving. Thus, $\vec{v}$ - would be the velocity of the air flow in or case.
+ would be the velocity of the air flow.
For simplicity, we are not going to consider the third dimension. In $2D$ the equation For simplicity, we are not going to consider the third dimension. In $2D$ the equation Line 103: Line 95: - In order to determine a numeric solution for this partial differential equation, the so-called finite difference methods are used. + For determining a numeric solution for this partial differential equation are + used the so-called finite difference methods. The technic consists in + approximating differential ratios as $h$ is closer to zero, so they are useful to + approximate differential equations. + With finite difference methods, partial differential equations are replaced by With finite difference methods, partial differential equations are replaced by - its approximations as finite differences, resulting in a system of  algebraic equations. This is solved at each node + its approximations in finite differences, resulting in an algebraic equations + system. The algebraic equations system is solved in each node $(x_i,y_j,t_k)$. These discrete values describe the temporal and spatial $(x_i,y_j,t_k)$. These discrete values describe the temporal and spatial - distribution of the particles diffusing.
+ distribution of the unknown function.

- Although implicit methods are unconditionally stable, so time steps could be larger and + Although implicit methods are unconditionally stable so time steps could be larger and make the calculus process faster, the tool we have used to solve our heat equation is the make the calculus process faster, the tool we have used to solve our heat equation is the - Euler explicit method, for it is the simplest option to approximate spatial derivatives.

+ Euler explicit method. + + Euler explicit method is the simplest option to approximate spatial derivatives, in which all + values are assumed at the beginning of Time.

- The equation gives the new value of the pheromone level in a given node in terms of initial values at that + The equation gives the new value of the pheromone level in terms of initial values in that - node and its immediate neighbors. Since all these values are known, the process is called + node and its immediate neighbors. Since all these values are known the process is called explicit. explicit. $$c(t_{k+1}) = c(t_k) + dt \cdot c'(t_k),$$ $$c(t_{k+1}) = c(t_k) + dt \cdot c'(t_k),$$ - Now, applying this method for the first case (with no wind consideration) we followed the + Now applying this method for the first case (with no wind consideration) we followed the - next steps: + next steps. 1. Split time $t$ into $n$ slices of equal length dt: 1. Split time $t$ into $n$ slices of equal length dt: Line 126: Line 126: \end{array} \right. $$\end{array} \right.$$ - 2. Considering the backward difference for the Euler explicit method,  the + 2. Considering the backward difference for the Euler explicit method implies that the - expression that gives the current pheromone level each time step is: + expression that refers to the current pheromone level each time step is: $$c (x, y, t) \approx c (x, y, t - dt ) + dt \cdot c'(x, y, t)$$ $$c (x, y, t) \approx c (x, y, t - dt ) + dt \cdot c'(x, y, t)$$ - 3. And now considering the spatial dimension, central differences is applied to the Laplace operator $\Delta$, and backward differences are applied to the vector differential operator $\nabla$ (in 2D and assuming equal steps in x and y directions): + 3. And now considering the spatial dimension, it is applied central differences to the Laplace operator $\Delta$, and the backward differences to the vector differential operator $\nabla$ ( in 2D and assuming equal steps in x and y directions): $$c (x, y, t) \approx c (x, y, t - dt ) + dt \left( D \cdot \nabla^2 c (x, y, t) - \nabla \vec{v} c (x, y, t) \right)$$ $$c (x, y, t) \approx c (x, y, t - dt ) + dt \left( D \cdot \nabla^2 c (x, y, t) - \nabla \vec{v} c (x, y, t) \right)$$ Line 138: Line 138: - With respect to the boundary conditions, they are null since we are considering an open space. Attending to the implementation and simulation of this method, dt must be small enough to avoid instability. + With respect to the boundary conditions, they are null since we are considering an opened-space. Attending to the implementation and simulation of this method, dt must be small enough to avoid instability. + + +
- -

References

-
-
-
1. Sol I. Rubinow, Mathematical Problems in the Biological Sciences, chap. 9, SIAM, 1973
2. -
3. J. Philibert. One and a half century of diffusion: Fick, Einstein, before and beyond. Diffusion Fundamentals, 2,1.1-1.10,  2005.
4. - -
-
-

+

The Idea

-

The idea

+

When one stares at moths, they apparently move with erratic flight paths. It is possibly because of predator avoiding reasons.

- + - + -

When one observes moths behavior, they apparently move with erratic flight paths. This is possibly to avoid predators. This random flight is modified by the presence of sex pheromones. Since these are pheromones released by females in order to attract an individual of the opposite sex, it makes sense that males respond to gradients of sex pheromone concentration, being attracted towards the source. As soon as a flying male randomly enters into a conical pheromone-effective sphere of sex pheromone released by a virgin female, the male begins to seek the female following a zigzag way. The male approaches the female, and finally copulates with her [1].

+ -

Approximation

+

In this frame, sex pheromones influence in moth behavior is also considered. Since these are pheromones released by females in order to attract an individual of the opposite sex, it makes sense that males respond to gradients of sex pheromone concentration, being attracted towards the source. As soon as a flying male randomly comes into conical pheromone-effective sphere of sex pheromone released by a virgin female, the male begins to seek the females in a zigzag way, approaches to the females and finally copulates with her [1].

+

Approximation

-

In Sexy Plant  we approximate the resulting moth movement as a vectorial combination of a gradient vector and a random vector. The magnitude of the gradient vector depends on the change in the pheromone concentration level between points separated by a differential stretch in space. More precisely, the gradient points in the direction of the greatest rate of increase of the function, and its magnitude is the slope of the graph in that direction. The random vector is constrained in this ‘moth response’ model by a fixed angle upper bound, assuming that the turning movement is relatively continuous.  For example, one can asume that the moth cannot turn 180 degrees from one time instant to the next.

+

In this project we approximate the resulting moth movement as a vectorial combination of a gradient vector and a random vector. The magnitude of the gradient vector comes from the change in pheromone concentration level among points separated by a differential stretch in space. More precisely, the gradient points in the direction of the greatest rate of increase of the function and its magnitude is the slope of the graph in that direction. The random vector is restricted in this ‘moth response’ model by a fixed angle, assuming that the turning movement is relatively continuous and for example the moth can’t turn 180 relative degrees at the next instant.

-

Our synthetic plants are supposed to release enough sexual pheromone so as to be able to saturate moth perception. In this sense the resulting moth vector movement will depend ultimately on the pheromone concentration levels in the field and the moth ability to follow better or worse the gradient of sex pheromone concentration.

+

Since the objective of this project consists in avoiding pest damage by reaching the mating disrupting among moths, our synthetic plants are supposed to release enough sexual pheromone so as to saturate moth perception. In this sense the resulting moth vector movement will depend ultimately on the pheromone concentration levels in the field and the moth ability to follow better or worse the gradient of sex pheromone concentration.

- + - + -

The three clases of male moth behavior we consider for the characterization of males moth behavior are described in  Table 1.

+ +

At this point, let’s highlight the three main aspects we consider for the characterization of males moth behavior:

Line 179: Line 169:

Table 1. Male moths behaviour characterization.

Table 1. Male moths behaviour characterization.

-

This ensemble of behaviors can be translated into a sum of vectors in which the random vector has constant module and changing direction within a range, whereas the module of the gradient vector is a function of the gradient in the field. +

In this context, this ensemble of behaviors could be translated in a sum of vectors in which the random vector has a constant module and changeable direction inside a range, whereas the gradient vector module is a function of the gradient in the field. The question now is: how do we include the saturation effect in the resulting moth shift vector?

- The question now is how do we include the saturation effect in the resulting moth shift vector. With this in mind, and focusing on the implementation process, our approach consists on the following:

+ -

To model chemoattraction, the gradient vector will be always have fixed unit magnitude, and its direction is that of the greatest rate of increase of the pheromone concentration.

+

With this in mind and focusing on the implementation process, our approach consists on the following:

-

To model the random flight, instead of using a random direction vector with constant module, we consider a random turning angle starting from the gradient vector direction.

+

The gradient vector instead of experiencing a change in its magnitude, this will be always the unit and its direction that of the greatest rate of increase of the pheromone concentration. A random direction vector with constant module will not be literally considered, but a random turning angle starting from the gradient vector direction.

- + -

Thus, how do we include the saturation effect in the resulting moth shift vector? This is key to achieve sexual confusion. Our answer: the behaviour dependence on the moth saturation level --in turn related to the pheromone concentration in the field-- will be included in the random turning angle.

+ +

Attending to the previous question how do we include the saturation effect in the resulting moth shift vector?, here the answer: the dependence on the moth saturation level (interrelated with the pheromone concentration in the field) will state in the random turning angle.

Line 194: Line 182:

Table 1. Approximation of the male moths behaviour.

Table 1. Approximation of the male moths behaviour.

-

This random turning angle will not follow a uniform distribution, but a Poisson distribution in which the mean is zero (no angle detour from the gradient vector direction) and the standard-deviation will be inversely proportional to the intensity of the gradient of sex pheromone concentration in the field. This approach leads to ‘sexual confusion’ of the insect as the field homogeneity increases. This is because the direction of displacement of the moth will equal the gradient direction with certain probability which depends on how saturated it is.

+

This random turning angle will not follow a uniform distribution, but a Poisson distribution in which the mean is zero (no angle detour from the gradient vector direction) and the standard-deviation will be inversely proportional to the intensity of the gradient of sex pheromone concentration in the field. This approach will drive to a ‘sexual confusion’ of the insect as the field homogeneity increases, since the moth in its direction of displacement will fit the gradient direction with certain probabilities which depend on how saturated they are.

-
+

References:

- +
-

References

+
1. Yoshitoshi Hirooka and Masana Suwanai. Role of Insect Sex Pheromone in Mating Behavior I. Theoretical Consideration on Release and Diffusion of Sex Pheromone in the Air.
2. -
+
3. W. L. Roelofs and R. T. Carde. Responses of  Lepidoptera to Synthetic Sex Pheromone Chemicals and their Analogues.
4. -
+ -
1. Yoshitoshi Hirooka and Masana Suwanai. Role of Insect Sex Pheromone in Mating Behavior I. Theoretical Consideration on Release and Diffusion of Sex Pheromone in the Air. J. Ethol, 4, 1986
2. +
+

+
-

-

Using a modeling environment called Netlogo, we simulate the approximate moth population behavior when the pheromone diffusion process take place.

+

Using a modeling environment called Netlogo, we try to simulate the approximate moth population behavior when pheromone diffusion processes are given.

- +

Netlogo simulator can be find in its website at Northwestern University.

-

The Netlogo simulator can be found in its website at Northwestern University. To download the source file of our Sexy plant simulation in Netlogo click here: +

To download the source file of our Sexyplant simlation in Netlogo click here: - sexyplants.nlogo

+ sexyplants.nlogo - +
-

Setup

+

SETUP:

- +
-
• We consider three  agentsmale and  female moths, and  sexy plants.
• +
• We consider three  agentsmale and  female moths, and  sexyplants.
• -
• We have two kinds of sexual pheromone emission sources: female moths and sexyplants.
• +
• We have two kind of sexual pheromone emission sources: female moths and sexyplants.
• -
• Our scenario is an open crop field where sexy plants are intercropped, and moths fly following different patterns depending on its sex.
• +
• Our scenario is an opened crop field where sexyplants are intercropped and moths fly following different patterns depending on its sex.
-

Females, apart from emitting sexual pheromones, move following erratic random flight paths. After mating, females do not emit pheromones for a period of 2 hours.

+

Females, apart from emitting sexual pheromones, they move with erratic random flight paths. After mating, females are 2 hours in which they are not emitting pheromone.

Males also move randomly while they are under its detection threshold. But when they detect a certain pheromone concentration, they start to follow the pheromone concentration gradients until its saturation threshold is reached.

Males also move randomly while they are under its detection threshold. But when they detect a certain pheromone concentration, they start to follow the pheromone concentration gradients until its saturation threshold is reached.

-

Sexy plants act as continuously- emitting sources, and their activity is regulated by a Switch.

+

sexyplants act as continuously- emitting sources and their activity is regulated by a Switch.

- + -

The pheromone diffusion process, it is simulated in Netlogo by implementing the Euler explicit method.

+ +

On the side of pheromone diffusion process, it is simulated in Netlogo by implementing the Euler explicit method.

[[File:Upv_simu1.png|600px|center|Figure 1. NETLOGO Simulation environment.]] [[File:Upv_simu1.png|600px|center|Figure 1. NETLOGO Simulation environment.]] Line 233: Line 218:

Figure 1. NETLOGO Simulation environment.

Figure 1. NETLOGO Simulation environment.

-

Runs

+

GO!

- +

When sexyplants are switched-off, males move randomly until they detect pheromone traces from females, in that case they follow them.

-

When sexy plants are switched-off, males move randomly until they detect pheromone traces from females. In that case they follow them.

+

When sexyplants are switched-on, the pheromone starts to diffuse from them, rising up the concentration levels in the field. At first, the sexyplants have an effect of pheromone traps on the male moths.

-

When sexy plants are switched-on, the pheromone starts to diffuse from them, rising up the concentration levels in the field. At first, sexy plants have the effect of acting as pheromone traps on the male moths.

+ Line 242: Line 226: [[File:VUPV_Polillas.png|600px|center|Figure 2. On the left: sexyplants are switched-off and a male moth follows the pheromone trace from a female. On the right: sexyplants are switched on and a male moth go towards the static source like it happens with synthetic pheromone traps.]] [[File:VUPV_Polillas.png|600px|center|Figure 2. On the left: sexyplants are switched-off and a male moth follows the pheromone trace from a female. On the right: sexyplants are switched on and a male moth go towards the static source like it happens with synthetic pheromone traps.]] +

Figure 2. On the left: sexyplants are switched-off and a male moth follows the pheromone trace from a female. On the right: sexyplants are switched on and a male moth go towards the static source like it happens with synthetic pheromone traps.

-

Figure 2. On the left: sexy plants are switched-off and a male moth follows the pheromone trace from a female. On the right: sexy plants are switched on and a male moth go towards the static source as it happens with synthetic pheromone traps.

+

As the concentration rises in the field, it becomes more homogeneous. Remember that the random turning angle of the insect follows a Poisson distribution, in which the standard-deviation is inversely proportional to the intensity of the gradient. Thus, the probability of the insect to take a bigger detour from the faced gradient vector direction is higher. This means that it is less able to follow pheromone concentration gradients, so ‘sexual confusion’ is induced.

- + -

As the concentration rises in the field, it becomes more homogeneous. Remember that the random turning angle of the insect follows a Poisson distribution, in which the standard-deviation is inversely proportional to the intensity of the gradient. Thus, the probability of the insect to take a bigger detour from the faced gradient vector direction is higher. This means that it is less able to follow pheromone concentration gradients, so sexual confusion is induced.

+ Line 252: Line 235:

Figure 3. NETLOGO Simulation of the field: sexyplants, female moths, pheromone diffusion and male moths.

Figure 3. NETLOGO Simulation of the field: sexyplants, female moths, pheromone diffusion and male moths.

-

Parameters

+

Parameters

+

+ The parameters of this model are not as well-characterized as we expected at first. Finding the accurate values of these parameters is not a trivial task, in the literature it is difficult to find a number experimentally obtained.

+

So we decided to take an inverse engineering approach. Doing a model parameters swept, we simulate many possible scenarios, and then we come up with values of parameters corresponding to our desired one: insects get confused. This will be useful to know the limitations of our system and to help to decide the final distribution of our plants in the crop field.

-

The parameters of this model are not as well-characterized as we expected at first. Finding the accurate values of these parameters is not a trivial task. In the literature it is difficult to find a number experimentally obtained. So we decided to take an inverse engineering approach. Doing a model parameters swept, we simulated many possible scenarios, and then we came up with values of parameters corresponding to our desired goal: insects get confused. This will be useful to know the limitations of our system and to help to decide the final distribution of our plants in the crop field. The parameters we found are:

Diffusion coefficient
Diffusion coefficient
Line 262: Line 247:
Range of search: 0.02-1 µg/h
Range of search: 0.02-1 µg/h
References: [4], [5]
References: [4], [5] -
Release rate (Sexy Plant)
+
Release rate (sexyplant)
The range of search that we have considered is a little wider than the one for the release rate of females.
The range of search that we have considered is a little wider than the one for the release rate of females.
- References: It generally has been found that pheromone dispensers releasing the chemicals above a certain emission rate will catch fewer males. The optimum release rate or dispenser load for trap catch varies greatly among species [4]. This emission rate above which male start to get confused could be the release rate from females.
+ References: It generally has been found that pheromone dispensers releasing the + chemicals above a certain emission rate will catch fewer males. The optimum release + rate or dispenser load for trap catch varies greatly among species [4].  This certain emission rate above which male start to get confused could be the release rate from females.
Detection threshold
Detection threshold
-
Range of search: 0.001-1 [Mass]/[Distance]^2

+
Range of search: 0.001-1 [Mass]/[Distante]^2

Saturation threshold
Saturation threshold
-
Range of search: 1-5[Mass]/[ Distance]^2

+
Range of search: 1-5[Mass]/[ Distante]^2

Moth sensitivity
Moth sensitivity
This is a parameter referred to the capability of the insect to detect changes in pheromone concentration in the patch it is located and the neighbor patch. When the field becomes more homogeneous, an insect with higher sensitivity will be more able to follow the gradients.
This is a parameter referred to the capability of the insect to detect changes in pheromone concentration in the patch it is located and the neighbor patch. When the field becomes more homogeneous, an insect with higher sensitivity will be more able to follow the gradients.
Line 275: Line 262:
Wind force
Wind force
Range: -0.1 – 0.1 cm/sec
Range: -0.1 – 0.1 cm/sec
- References: [7] (700cm/sec!! we did not rely on this figure)
+ References: [7] (700cm/sec!!!)
Population
Population
The number of males and females can be selected by the observer.
The number of males and females can be selected by the observer.
Line 282: Line 269:

-

Simulation time step (ticks)

+

Ticks (time step) !!!

-

We consider the equivalence 20 ticks= 1 hour.  That is 1 tick = 3 minutes.

+

We’ll consider the equivalence 20 ticks= 1 hour.  That is 1 tick = 3 minutes.

-
+

Patches !!!

-

Patches

+

The approximate velocity of a male moth flying towards the female in natural environment is 0.3 m/sec [6].  Each moth moves 1 patch per tick, so if 1 tick is equal to 3 minutes (180 sec), the patch is 54 meter long to get that velocity.

The approximate velocity of a male moth flying towards the female in natural environment is 0.3 m/sec [6].  Each moth moves 1 patch per tick, so if 1 tick is equal to 3 minutes (180 sec), the patch is 54 meter long to get that velocity.

One can modify the number of patches that conform the field so as to analyze its own case.

One can modify the number of patches that conform the field so as to analyze its own case.

+

-
+ - +

References:

-

References

+
-
+
1. Wilson et al.1969, Hirooka and Suwanai, 1976.
2. -
+ -
1. Wilson et al.1969, Hirooka and Suwanai, 1976.
2. +
3. Monchich abd Mauson, 1961, Lugs, 1968.
4. Monchich abd Mauson, 1961, Lugs, 1968.
5. G. A. Lugg. Diffusion Coefficients of Some Organic and Other Vapors in Air.
6. G. A. Lugg. Diffusion Coefficients of Some Organic and Other Vapors in Air.
7. Line 302: Line 287:
8. R.W. Mankiny, K.W. Vick, M.S. Mayer,  J.A. Coeffelt and P.S. Callahan (1980) Models For Dispersal Of Vapors in Open and Confined Spaces: Applications to Sex Pheromone Trapping in a Warehouse, Page 932, 940.
9. R.W. Mankiny, K.W. Vick, M.S. Mayer,  J.A. Coeffelt and P.S. Callahan (1980) Models For Dispersal Of Vapors in Open and Confined Spaces: Applications to Sex Pheromone Trapping in a Warehouse, Page 932, 940.
10. Tal Hadad, Ally Harari, Alex Liberzon, Roi Gurka (2013) On the correlation of moth flight to characteristics of a turbulent plume.
11. Tal Hadad, Ally Harari, Alex Liberzon, Roi Gurka (2013) On the correlation of moth flight to characteristics of a turbulent plume.
12. -
13. Average Weather For Valencia, Manises, Costa del Azahar, Spain.
14. +
15. Average Weather For Valencia, Manises, Costa del Azahar, Spain.
-
+

- +

## Revision as of 02:01, 18 October 2014

### Modeling > Pheromone Diffusion

Pheromone Diffusion

and Moths Response

Sexually communication among moths is accomplished chemically by the release of an "odor" into the air. This "odor" is the sexual pheromones.

Figure 1. Female moth releasing sex pheromones and male moth.

Pheromones are molecules that can undergo a diffusion process in which the random movement of gas molecules transport the chemical away from its source (Sol I. Rubinow, Mathematical Problems in the Biological Sciences, Lecture 9). However, diffusion processes are complex, and modelling them analytically and with accuracy is difficult, even more when the geometry is not simple.

For this reason, we decided to consider a simplified model in which pheromone chemicals obey to the heat diffusion equation. Then, it is solved by the Euler numeric approximation in order to obtain the spatial and temporal distribution of pheromone concentration. See more about heat equation and mathematical expressions for Euler method.

Moths seem to respond to gradients of pheromone concentration attracted towards the source, although there are other factors that lead moths sexually to pheromone sources such as optomotor anemotaxis (J. N. Perry and C. Wall , A Mathematical Model for the Flight of Pea Moth to Pheromone Traps Through a Crop). However, increasing the pheromone concentration to unnaturally high levels may disrupt male orientation (W. L. Roelofs and R. T. Carde, Responses of Lepidoptera to synthetic sex pheromone chemicals and their analogues). See more about the modeling of moth flight paths.

Using a modeling environment called Netlogo, we simulate the approximate moths behavior during the pheromone dispersion process. So, this will help us to predict moth response when they are also in presence of our synthetic plants.

Since pheromones are chemicals released into the air, we have to consider both the motion of the fluid and the one of the particles suspended in the fluid.

The motion of fluids can be described by the Navier–Stokes equations. But the frequent nonlinearity of these equations makes most problems difficult or impossible to solve, since it may exists turbulences in the air flow [1]. Now attending to the particles suspended in the fluid, an option for pheromone dispersion modeling consists in the assumption of pheromones diffusive-like behavior. That is: pheromones are molecules that can undergo a diffusion process in which the random movement of gas molecules transport the chemical away from its source [2].

There are two ways to introduce the notion of diffusion: either a phenomenological approach starting with Fick's laws of diffusion and their mathematical consequences, or a physical and atomistic one, by considering the random walk of the diffusing particles.

In our case, we decided to hold our diffusion process by the Fick's laws. So it is postulated that the flux goes from regions of high concentration to regions of low concentration, with a magnitude that is proportional to the concentration gradient. However, diffusion processes are complex, and modelling them analytically and with accuracy is difficult, even more when the geometry is not simple (final distribution of our plants in the crop field). For this reason, we decided to consider a simplified model in which pheromone chemicals obey to the heat diffusion equation.

### Approximation

The diffusion equation is a partial differential equation which describes density dynamics in a material undergoing diffusion. It is also used to describe processes exhibiting diffusive-like behavior, like in our case.

The equation is usually written as:

$$\frac{\partial \phi (r,t) }{\partial t} = \nabla · [D(\phi,r) \nabla \phi(r,t)]$$

where $\phi(r, t)$ is the density of the diffusing material at location r and time t and $D(\phi, r)$ is the collective diffusion coefficient for density $\phi$ at location $r$; and $\nabla$ represents the vector differential operator.

If the diffusion coefficient does not depend on the density then the equation is linear and $D$ is constant. Thus, the equation reduces to the following linear differential equation: $$\frac{\partial \phi (r,t) }{\partial t} = D \nabla^2 \phi(r,t)$$

also called the heat equation.

Making use of this equation we can write pheromones chemicals diffusion equation with no wind effect consideration as:

$$\frac{\partial c }{\partial t} = D \nabla^2 C = D \Delta c$$

where c is the pheromone concentration, $\Delta$ is the Laplacian operator, and $D$ is the pheromone diffusion constant in air.

If we consider the wind, we face a diffusion system with drift and an advection term is added to the equation above.

$$\frac{\partial c }{\partial t} = D \nabla^2 c - \nabla \cdot (\vec{v} c )$$

where $\vec{v}$ is the average velocity that the quantity is moving. Thus, $\vec{v}$ would be the velocity of the air flow.

For simplicity, we are not going to consider the third dimension. In $2D$ the equation would be:

$$\frac{\partial c }{\partial t} = D \left(\frac{\partial^2 c }{\partial^2 x} + \frac{\partial^2 c }{\partial^2 y}\right) – \left(v_{x} \cdot \frac{\partial c }{\partial x} + v_{y} \cdot \frac{\partial c }{\partial y} \right) = D \left( c_{xx} + c_{yy}\right) - \left(v_{x} \cdot c_{x} + v_{y} \cdot c_{y}\right)$$

For determining a numeric solution for this partial differential equation are used the so-called finite difference methods. The technic consists in approximating differential ratios as $h$ is closer to zero, so they are useful to approximate differential equations.

With finite difference methods, partial differential equations are replaced by its approximations in finite differences, resulting in an algebraic equations system. The algebraic equations system is solved in each node $(x_i,y_j,t_k)$. These discrete values describe the temporal and spatial distribution of the unknown function.

Although implicit methods are unconditionally stable so time steps could be larger and make the calculus process faster, the tool we have used to solve our heat equation is the Euler explicit method.

Euler explicit method is the simplest option to approximate spatial derivatives, in which all values are assumed at the beginning of Time.

The equation gives the new value of the pheromone level in terms of initial values in that node and its immediate neighbors. Since all these values are known the process is called explicit.

$$c(t_{k+1}) = c(t_k) + dt \cdot c'(t_k),$$

Now applying this method for the first case (with no wind consideration) we followed the next steps.

1. Split time $t$ into $n$ slices of equal length dt: $$\left\{ \begin{array}{c} t_0 &=& 0 \\ t_k &=& k \cdot dt \\ t_n &=& t \end{array} \right.$$

2. Considering the backward difference for the Euler explicit method implies that the expression that refers to the current pheromone level each time step is:

$$c (x, y, t) \approx c (x, y, t - dt ) + dt \cdot c'(x, y, t)$$

3. And now considering the spatial dimension, it is applied central differences to the Laplace operator $\Delta$, and the backward differences to the vector differential operator $\nabla$ ( in 2D and assuming equal steps in x and y directions):

$$c (x, y, t) \approx c (x, y, t - dt ) + dt \left( D \cdot \nabla^2 c (x, y, t) - \nabla \vec{v} c (x, y, t) \right)$$ $$D \cdot \nabla^2 c (x, y, t) = D \left( c_{xx} + c_{yy}\right) = D \frac{c_{i,j-1} + c_{i,j+1} + c_{i-1,j } + c_{i+1,j} – 4 c_{I,j}}{s}$$ $$\nabla \vec{v} c (x, y, t) = v_{x} \cdot c_{x} + v_{y} \cdot c_{y} = v_{x} \frac{c_{i,j} – c_{i-1,j}}{h} + v_{y} \frac{c_{i,j} – c_{i,j-1}}{h}$$

With respect to the boundary conditions, they are null since we are considering an opened-space. Attending to the implementation and simulation of this method, dt must be small enough to avoid instability.

### The Idea

When one stares at moths, they apparently move with erratic flight paths. It is possibly because of predator avoiding reasons.

In this frame, sex pheromones influence in moth behavior is also considered. Since these are pheromones released by females in order to attract an individual of the opposite sex, it makes sense that males respond to gradients of sex pheromone concentration, being attracted towards the source. As soon as a flying male randomly comes into conical pheromone-effective sphere of sex pheromone released by a virgin female, the male begins to seek the females in a zigzag way, approaches to the females and finally copulates with her [1].

### Approximation

In this project we approximate the resulting moth movement as a vectorial combination of a gradient vector and a random vector. The magnitude of the gradient vector comes from the change in pheromone concentration level among points separated by a differential stretch in space. More precisely, the gradient points in the direction of the greatest rate of increase of the function and its magnitude is the slope of the graph in that direction. The random vector is restricted in this ‘moth response’ model by a fixed angle, assuming that the turning movement is relatively continuous and for example the moth can’t turn 180 relative degrees at the next instant.

Since the objective of this project consists in avoiding pest damage by reaching the mating disrupting among moths, our synthetic plants are supposed to release enough sexual pheromone so as to saturate moth perception. In this sense the resulting moth vector movement will depend ultimately on the pheromone concentration levels in the field and the moth ability to follow better or worse the gradient of sex pheromone concentration.

At this point, let’s highlight the three main aspects we consider for the characterization of males moth behavior:

Table 1. Male moths behaviour characterization.

In this context, this ensemble of behaviors could be translated in a sum of vectors in which the random vector has a constant module and changeable direction inside a range, whereas the gradient vector module is a function of the gradient in the field. The question now is: how do we include the saturation effect in the resulting moth shift vector?

With this in mind and focusing on the implementation process, our approach consists on the following:

The gradient vector instead of experiencing a change in its magnitude, this will be always the unit and its direction that of the greatest rate of increase of the pheromone concentration. A random direction vector with constant module will not be literally considered, but a random turning angle starting from the gradient vector direction.

Attending to the previous question how do we include the saturation effect in the resulting moth shift vector?, here the answer: the dependence on the moth saturation level (interrelated with the pheromone concentration in the field) will state in the random turning angle.

Table 1. Approximation of the male moths behaviour.

This random turning angle will not follow a uniform distribution, but a Poisson distribution in which the mean is zero (no angle detour from the gradient vector direction) and the standard-deviation will be inversely proportional to the intensity of the gradient of sex pheromone concentration in the field. This approach will drive to a ‘sexual confusion’ of the insect as the field homogeneity increases, since the moth in its direction of displacement will fit the gradient direction with certain probabilities which depend on how saturated they are.

### References:

1. Yoshitoshi Hirooka and Masana Suwanai. Role of Insect Sex Pheromone in Mating Behavior I. Theoretical Consideration on Release and Diffusion of Sex Pheromone in the Air.
2. W. L. Roelofs and R. T. Carde. Responses of Lepidoptera to Synthetic Sex Pheromone Chemicals and their Analogues.

Using a modeling environment called Netlogo, we try to simulate the approximate moth population behavior when pheromone diffusion processes are given.

Netlogo simulator can be find in its website at Northwestern University.

To download the source file of our Sexyplant simlation in Netlogo click here: sexyplants.nlogo

### SETUP:

• We consider three agents: male and female moths, and sexyplants.
• We have two kind of sexual pheromone emission sources: female moths and sexyplants.
• Our scenario is an opened crop field where sexyplants are intercropped and moths fly following different patterns depending on its sex.

Females, apart from emitting sexual pheromones, they move with erratic random flight paths. After mating, females are 2 hours in which they are not emitting pheromone.

Males also move randomly while they are under its detection threshold. But when they detect a certain pheromone concentration, they start to follow the pheromone concentration gradients until its saturation threshold is reached.

sexyplants act as continuously- emitting sources and their activity is regulated by a Switch.

On the side of pheromone diffusion process, it is simulated in Netlogo by implementing the Euler explicit method.

Figure 1. NETLOGO Simulation environment.

### GO!

When sexyplants are switched-off, males move randomly until they detect pheromone traces from females, in that case they follow them.

When sexyplants are switched-on, the pheromone starts to diffuse from them, rising up the concentration levels in the field. At first, the sexyplants have an effect of pheromone traps on the male moths.

Figure 2. On the left: sexyplants are switched-off and a male moth follows the pheromone trace from a female. On the right: sexyplants are switched on and a male moth go towards the static source like it happens with synthetic pheromone traps.

As the concentration rises in the field, it becomes more homogeneous. Remember that the random turning angle of the insect follows a Poisson distribution, in which the standard-deviation is inversely proportional to the intensity of the gradient. Thus, the probability of the insect to take a bigger detour from the faced gradient vector direction is higher. This means that it is less able to follow pheromone concentration gradients, so ‘sexual confusion’ is induced.

Figure 3. NETLOGO Simulation of the field: sexyplants, female moths, pheromone diffusion and male moths.

### Parameters

The parameters of this model are not as well-characterized as we expected at first. Finding the accurate values of these parameters is not a trivial task, in the literature it is difficult to find a number experimentally obtained.

So we decided to take an inverse engineering approach. Doing a model parameters swept, we simulate many possible scenarios, and then we come up with values of parameters corresponding to our desired one: insects get confused. This will be useful to know the limitations of our system and to help to decide the final distribution of our plants in the crop field.

Diffusion coefficient
Range of search: 0.01-0.2 cm^2/s
References: [1], [2], [3], [5]
Release rate (female)
Range of search: 0.02-1 µg/h
References: [4], [5]
Release rate (sexyplant)
The range of search that we have considered is a little wider than the one for the release rate of females.
References: It generally has been found that pheromone dispensers releasing the chemicals above a certain emission rate will catch fewer males. The optimum release rate or dispenser load for trap catch varies greatly among species [4]. This certain emission rate above which male start to get confused could be the release rate from females.
Detection threshold
Range of search: 0.001-1 [Mass]/[Distante]^2

Saturation threshold
Range of search: 1-5[Mass]/[ Distante]^2

Moth sensitivity
This is a parameter referred to the capability of the insect to detect changes in pheromone concentration in the patch it is located and the neighbor patch. When the field becomes more homogeneous, an insect with higher sensitivity will be more able to follow the gradients.
Range: 0-0.0009
(The maximum level of moth sensitivity has to be less than the minimum level of release rate of females, since this parameter is obtained from the difference)
Wind force
Range: -0.1 – 0.1 cm/sec
References: [7] (700cm/sec!!!)
Population
The number of males and females can be selected by the observer.

### Ticks (time step) !!!

We’ll consider the equivalence 20 ticks= 1 hour. That is 1 tick = 3 minutes.

### Patches !!!

The approximate velocity of a male moth flying towards the female in natural environment is 0.3 m/sec [6]. Each moth moves 1 patch per tick, so if 1 tick is equal to 3 minutes (180 sec), the patch is 54 meter long to get that velocity.

One can modify the number of patches that conform the field so as to analyze its own case.

### References:

1. Wilson et al.1969, Hirooka and Suwanai, 1976.
2. Monchich abd Mauson, 1961, Lugs, 1968.
3. G. A. Lugg. Diffusion Coefficients of Some Organic and Other Vapors in Air.
4. W. L. Roelofs and R. T. Carde. Responses of Lepidoptera to Synthetic Sex Pheromone Chemicals and their Analogues, Page 386.
5. R.W. Mankiny, K.W. Vick, M.S. Mayer, J.A. Coeffelt and P.S. Callahan (1980) Models For Dispersal Of Vapors in Open and Confined Spaces: Applications to Sex Pheromone Trapping in a Warehouse, Page 932, 940.
6. Tal Hadad, Ally Harari, Alex Liberzon, Roi Gurka (2013) On the correlation of moth flight to characteristics of a turbulent plume.
7. Average Weather For Valencia, Manises, Costa del Azahar, Spain.

The aim consists of reducing the possibility of meeting among moths of opposite sex. Thus, we will analyze the number of meetings in the three following cases:

1. When sexyplants are switched-off and males only interact with females.
2. When sexyplants are switched-on and have an effect of trapping males.
3. When sexyplants are swiched-on and males get confused when the concentration of pheromone level is higher than their saturation threshold.

It is also interesting to analyze a fourth case, what does it happen if females wouldn’t emit pheromones and males just move randomly through the field? :

1. Males and females move randomly. How much would our results differ from the rest of cases?

What is important is that between the first and the third case, the number of meetings should be less in the latter than in the former. Then we are closer to our objective fulfillment.