Team:StanfordBrownSpelman/Cellulose Acetate

From 2014.igem.org

(Difference between revisions)
Line 135: Line 135:
<div class="row">
<div class="row">
   <div id="subheader" class="small-8 small-centered columns">
   <div id="subheader" class="small-8 small-centered columns">
-
   <h6>The first step in working towards producing our building material was to grow cultures of cellulose producing bacteria. After these cultures grew for 1-2 weeks, we removed the produced cellulose sheet from the culture to test various methods of drying. We experimented with drying the sheet in an oven, to produce an extreme thin layer of cellulose. We also wrapped fungal mycelium, which we intend to be the body of our UAV, with wet cellulose, and allowed the cellulose to dry on its own. This will provide the platform for us to alter the biomaterial for flight, by making it waterproof, for example.</h6>  
+
   <h6>The first step in working towards producing our building material was to grow cultures of cellulose producing bacteria in sterile trays. After these cultures grew for 1-2 weeks, we removed the produced cellulose sheet from the culture to test various methods of drying. We experimented with drying the sheet in an oven, to produce an extreme thin layer of cellulose. We also wrapped fungal mycelium, which we intend to be the body of our UAV, with wet cellulose, and allowed the cellulose to dry on its own. This will provide the platform for us to alter the biomaterial for flight, by making it waterproof, for example.</h6>  
</div></div>
</div></div>

Revision as of 07:43, 17 October 2014

Stanford–Brown–Spelman iGEM 2014 — Cellulose Acetate

Approach & Methods
Our goal was to turn bacterial cellulose into cellulose acetate.


Fig. 1: Cellulose on the left transformed into cellulose acetate on the right.
To accomplish this we looked to transform the genes responsible for the acetylation of cellulose in P. fluorescens, wssF-I [3], into our model cellulose-producing organism G. hansenii.


Fig. 2: Acetylation genes. Image via [7].
However, G. hansenii is not a well-characterized organism for standard synthetic biology lab procedures and consequently cannot use the standard pSB1C3 backbone. Instead, we utilized the multi-host shuttle vector pUCD4 [6], which allowed us to grow the plasmid to large quantities in E. coli before transforming it into G. hansenii. For the transformation we adapted the electroporation protocol found in [5].


Fig. 3: Design of pUCD4 plasmid
Note: pUCD4 differs from pUCD2 in only one restriction site.

Results
We were able to extract total DNA from P. fluorescens and amplify the four acetylation genes.


Fig. 4: Gel verification confirming amplification of four acetylation genes from total P. fluorescens DNA.
The prefix and suffix were added onto these PCR products, and then they were inserted (separately) into pSB1C3 for biobricking (see Submitted Bricks).


Fig. 5: wssF sequencing alignment.
We were also able to show that the pUCD4 shuttle vector was effective in making G. hansenii a suitable chassis for carrying synthetic information, an important step in the process of studying cellulose derivate polymers. By plating both transformed and untransformed cells on antibiotic selection plates and using colony PCR to screen for the presence of the plasmid, we found that pUCD4 was effective at providing resistances to multiple antibiotics.


Fig. 6: pUCD4 verification gel.
The first step in working towards producing our building material was to grow cultures of cellulose producing bacteria in sterile trays. After these cultures grew for 1-2 weeks, we removed the produced cellulose sheet from the culture to test various methods of drying. We experimented with drying the sheet in an oven, to produce an extreme thin layer of cellulose. We also wrapped fungal mycelium, which we intend to be the body of our UAV, with wet cellulose, and allowed the cellulose to dry on its own. This will provide the platform for us to alter the biomaterial for flight, by making it waterproof, for example.


Fig. 7: Production of dried cellulose. a) A wet cellulose sheet, soaking in 50% alcohol solution. b) The cellulose was placed between two acrylic gel casters and left in a 75ºC oven for 2 days. c) A thin, dry cellulose sheet. d) Fungal mycelium wrapped in dry cellulose.
One alteration we intend to make in order to produce a functional UAV is to draw circuits on the biomaterial to conduct electricity. In order to produce a biodegradable circuit, we worked with a company called AgiC, which prints circuits out of silver nano particles (see our Building a UAV page for a full circuit). By taking silver ink and painting it on to our bacterial cellulose, we were able to test the conductive capabilities of our building material.


Fig. 8: Making cellulose electrically conductive. a) The silver ink used to paint cellulose. b) Silver nano particles painted onto cellulose covered mycelium. c) Positive Control: Aluminum foil has a resistance of 0.5 ohms. d) Negative Control: Unaltered cellulose has no resistance, and thus no conductivity. e) Experimental: Cellulose painted with silver nano particles has a resistance of 1.6 ohms.

Building a Biological UAV
Our team modeled, prototyped, and collaborated with Ecovative Design to grow a mycelium-based chassis for our biological drone. For more information on this process, including part designs, links to open source model files, and photographs of the biological and biodegradable UAV we built and flew, click here!
References
1. Fischer S et al. (2008) Properties and Applications of Cellulose Acetate. Macromol. Symp. 262: 89-96. DOI: 10.1002/masy.200850210
2. Ross P et al. (1991) Cellulose Biosynthesis and Function in Bacteria. Microbiological Reviews 55: 35-58. PMID: 2030672

3. Spiers AJ et al. (2003) Biofilm formation at the air–liquid interface by the Pseudomonas fluorescens SBW25 wrinkly spreader requires an acetylated form of cellulose. Molecular Microbiology 50: 15-27. PMID: 14507360

4. The United States Pharmacopeial Convention. Cellulose Acetate. USP-NF. 2013.

5. Hall PE et al. (1992) Transformation of Acetobacter xylinum with Plasmid DNA by Electroporation. Plasmid 28: 194-200.
 PMID: 1461938

6. Close TJ et al. (1984) Design and Development of Amplifiable Broad-Host-Range Cloning Vectors: Analysis of the wir Region of Agrobacterium tumefaciens Plasmid pTiC58. Plasmid 12: 111-118. PMID: 6095350

7. Spiers AJ et al. (2013) Cellulose Expression in Pseudomonas fluorescens SBW25 and Other Environmental Pseudomonads in Cellulose - Medical, Pharmaceutical, and Electronic Applications. DOI: 10.5772/53736
Built atop Foundation. Content &amp Development © Stanford–Brown–Spelman iGEM 2014.