Team:Peking/CellularBurden

From 2014.igem.org

(Difference between revisions)
 
(9 intermediate revisions not shown)
Line 29: Line 29:
      
      
      
      
-
     <p>In most iGEM projects and synthetic biology research, complex genetic circuits are imported into bacteria to achieve variable functions. Such plenty of extra proteins, however, brings out serious burden to the host. Numerous research reported this burden profoundly influence the general physiological state of the cell reflected by growth rate variation in steady state conditions<sup>[1]</sup>. <b>(Fig. 1)</b> This negative effect might lead to serious result, for example, unexpected performance of genetic circuits which needs strict parameters to function, but rarely attracts enough attention. Precise description to evaluate the actual influence of this phenomenon is expected.</p>
+
     <p>In most iGEM projects and synthetic biology research, complex genetic circuits are imported into bacteria to achieve variable functions. Such plenty of extra proteins, however, brings out serious burden to the host. Numerous research reported this burden profoundly influence the general physiological state of the cell reflected by growth rate variation in steady state conditions<a href="#WCGCB1" ><sup>[1]</sup></a>. <b>(Fig. 1)</b> This negative effect might lead to serious result, for example, unexpected performance of genetic circuits which needs strict parameters to function, but rarely attracts enough attention. Precise description to evaluate the actual influence of this phenomenon is expected.</p>
      
      
     <figure><img src="https://static.igem.org/mediawiki/2014/8/8d/Peking2014Ycy_CBFigure_1.png" style="height:308px"/>
     <figure><img src="https://static.igem.org/mediawiki/2014/8/8d/Peking2014Ycy_CBFigure_1.png" style="height:308px"/>
Line 43: Line 43:
     </figure>
     </figure>
      
      
-
     <p>In this part, aiming at the two questions, we focus on experimentally constructing and verifying the relationship between cell cost and growth rate, which is similar with previous reported results<sup>[2]</sup>, and finally calculating the optimal expression level. Furthermore, we also explore the growth rate under different nutritional conditions, representing the different capability to afford protein burden. Combining these two parameters, we would establish a mathematical model based on partial differential equations to analysis the process of our project.<b>(Fig. 3)</b>.</p>
+
     <p>In this part, aiming at the two questions, we focus on experimentally constructing and verifying the relationship between cell cost and growth rate, which is similar with previous reported results<a href="#WCGCB1" ><sup>[2]</sup></a>, and finally calculating the optimal expression level. Furthermore, we also explore the growth rate under different nutritional conditions, representing the different capability to afford protein burden. Combining these two parameters, we would establish a mathematical model based on partial differential equations to analysis the process of our project.<b>(Fig. 3)</b>.</p>
      
      
     <figure><img src="https://static.igem.org/mediawiki/2014/9/93/Peking2014Ycy_Figure3.png" style="height:287px"/>
     <figure><img src="https://static.igem.org/mediawiki/2014/9/93/Peking2014Ycy_Figure3.png" style="height:287px"/>
Line 52: Line 52:
     <h2 id="cellularburden02">Gene Expression Effects</h2>
     <h2 id="cellularburden02">Gene Expression Effects</h2>
      
      
-
     <p>Considering the low toxicity of mRFP, a serial of high-copy plasmids containing mRFP under gradient intensity of promoters is transformed into <i>E. coli</i>, and the growth curve of different strains are characterized. <b>(Fig. 4a)</b> We use the fluorescence intensity provided by iGEM Registry <a href="http://parts.igem.org/Part:BBa_J23100" target="_blank">BBa_K1378032(http://parts.igem.org/Part:BBa_J23100)</a>to evaluate the different expression levels. According to our result, we successfully verify the empirical relationship between cell cost and growth rate. <b>(Fig. 4b)</b>.</p>
+
     <p>Considering the low toxicity of mRFP, a serial of high-copy plasmids containing mRFP under gradient intensity of promoters is transformed into <i>E. coli</i>, and the growth curve of different strains are characterized. <b>(Fig. 4a)</b> We use the fluorescence intensity provided by iGEM Registry <a href="http://parts.igem.org/Part:BBa_J23100" target="_blank">BBa_J23100</a> to evaluate the different expression levels. According to our result, we successfully verify the empirical relationship between cell cost and growth rate. <b>(Fig. 4b)</b>.</p>
      
      
     <figure><img src="https://static.igem.org/mediawiki/2014/4/41/Peking2014zsy_CB1.gif"></figure>
     <figure><img src="https://static.igem.org/mediawiki/2014/4/41/Peking2014zsy_CB1.gif"></figure>
      
      
-
     <figure><img src="https://static.igem.org/mediawiki/2014/f/fa/Peking2014Ycy_CBFigure_4.png" style="height:284px"/>
+
     <figure><img src="https://static.igem.org/mediawiki/2014/0/06/Peking2014Ycy_CBfigure4.png" style="height:284px"/>
          
          
-
         <figcaption><b>Figure 4</b>. <b>(a)</b> Growth curves of <i>E. coli</i> carrying a series of burden plasmids. The growth rate decreases generally when carrying the increasing strength of plasmids from J23118 to J23101. <b>(b)</b> The relation between growth rate and fluorescence intensity which reflects the individual expression level, indicating linear correlation between them.
+
         <figcaption><b>Figure 4</b>. <b>(a) Growth curves of <i>E. coli</i> carrying a series of burden plasmids.</b> The growth rate decreases generally when carrying the increasing strength of plasmids from J23118 to J23101. <b>(b) The relation between growth rate and fluorescence intensity which reflects the individual expression level, indicating linear correlation between them.</b>
<figcaption>
<figcaption>
             </figure>
             </figure>
Line 70: Line 70:
     <h2 id="cellularburden03">Nutritional Condition</h2>
     <h2 id="cellularburden03">Nutritional Condition</h2>
      
      
-
     <p>The nutritional condition is also a limitation on growth rate. We measured corresponding growth rate λ and the maximum environmental capacity N_K under different concentration nutrient, realized by diluting the medium. In order to better mimic the real situation, other than standard LB medium, lysed algae culture is also used as medium. (Fig. 5a, 5b) Results show that the growth rates in different nutrition condition follow the equations: (Fig. 5c, 5d)</p>
+
     <p>The nutritional condition is also a limitation on growth rate. We measured corresponding growth rate λ and the maximum environmental capacity N<sub>K</sub> under different concentration nutrient, realized by diluting the medium. It is shown that the growth rates in different nutrition condition follow the equations: </p>
     <figure><img src="https://static.igem.org/mediawiki/2014/2/22/Peking2014zsy_CB2.gif"></figure>
     <figure><img src="https://static.igem.org/mediawiki/2014/2/22/Peking2014zsy_CB2.gif"></figure>
     <figure><img src="https://static.igem.org/mediawiki/2014/4/41/Peking2014zsy_CB3.gif"></figure>
     <figure><img src="https://static.igem.org/mediawiki/2014/4/41/Peking2014zsy_CB3.gif"></figure>
Line 76: Line 76:
     <figure><img src="https://static.igem.org/mediawiki/2014/5/52/Peking2014zsy_CB4.gif"></figure>
     <figure><img src="https://static.igem.org/mediawiki/2014/5/52/Peking2014zsy_CB4.gif"></figure>
     <figure><img src="https://static.igem.org/mediawiki/2014/e/ed/Peking2014zsy_CB5.gif"></figure>
     <figure><img src="https://static.igem.org/mediawiki/2014/e/ed/Peking2014zsy_CB5.gif"></figure>
 +
<p>The function α still needs to verified. Gradient diluted standard LB medium is used as medium to quantify the growth curve. (Fig. 6a) We can see the exponential relationship between the nutrition condition and growth rate λ.<b>(Fig. 6)</b></p>
      
      
-
    <h2 id="cellularburden04">Model</h2> 
+
 
-
   
+
-
    <p>Based on previous experiments and equations, the accumulated protein amount A could be represented by a multiplication between the current population of bacteria N(t) and expression level ϕ. The former is the integral of growth rate λ to time. The complete formula has the following form:</p>
+
-
    A=ϕ∫_0^t▒〖N(t)dt〗= Numerical simulation provides the extremum of this function in different nutritional condition. (Fig. 6)</p>
+
-
 
+
   <figure><img src="https://static.igem.org/mediawiki/2014/2/24/Peking2014Ycy_CBFigure6.png" style="height:300px"/>
   <figure><img src="https://static.igem.org/mediawiki/2014/2/24/Peking2014Ycy_CBFigure6.png" style="height:300px"/>
        
        
Line 87: Line 84:
           </figure>
           </figure>
    
    
-
   <h2 id="cellularburden05">Project Process Model</h2>
+
    <h2 id="cellularburden04">Analytical Analysisl</h2> 
 +
   
 +
    <p>Based on previous experiments and equations, the accumulated protein amount A could be represented by a multiplication between the current population of bacteria N(t) and expression level ϕ. The former is the integral of growth rate λ to time. The complete formula has the following form:</p>
 +
    A=ϕ∫_0^t▒〖N(t)dt〗= Numerical simulation provides the extremum of this function in different nutritional condition. (Fig. 6)</p>
 +
 
 +
   <h2 id="cellularburden05">Proliferation Model</h2>
    
    
-
   <p>In our design, almost all of nutrition comes from algae lysed by lysozyme. Thus the nutrition condition is related to the lysozyme production. Consider this relation, the population variation is characterized by this formula in a specific algae concentration:</p>
+
   <p>In our design, almost all of nutrition comes from algae lysed by lysozyme. Thus the nutrition condition is related to the lysozyme production. Consider this relation, a proliferation model has been constructed to find a optimal expression in natural environment.</p>
 +
  <p>From result we can deduce that cyanobacteria are eliminated most quickly in a specific concentration, while too high or low expression level significantly dampens the killing efficiency <b>(Fig. 7)</b>. Consequently we could choose an appropriate intensity of the lysozyme based on this model.</p>
    
    
 +
  <figure><img src="https://static.igem.org/mediawiki/2014/6/69/Peking2014wcg_Model111.png" style="height:300px"/>
 +
     
 +
      <figcaption><b>Figure 7</b>.Mesh figure indicating that variation of cyanobacteria population in different expression level of lysozyme. The vertical axis represents the population and the two horizontal axes represent the concentration and time. Curves in moderate concentration are sharpen than them in the boundary, which means that an expression level corresponding to maximum of efficiency exists. </figcaption>
 +
          </figure>
      
      
<h2 id="cellularburden06">Discussion</h2>
<h2 id="cellularburden06">Discussion</h2>
Line 99: Line 106:
-
<p><h2>References</h2></p>
+
<p><h2 id="WCGCB1">References</h2></p>
-
<p>[1] Scott, M., Hwa, T. (2011). Bacterial growth laws and their applications.Current opinion in biotechnology, 22(4), 559-565.</p>
+
<p>[1] Scott, M., Hwa, T. (2011). Bacterial growth laws and their applications.<i>Current opinion in biotechnology, 22</i>(4), 559-565.</p>
-
<p>[2] Scott, M., Gunderson, C. W., Mateescu, E. M., Zhang, Z., Hwa, T. (2010). Interdependence of cell growth and gene expression: origins and consequences. Science, 330(6007), 1099-1102.</p>
+
<p>[2] Scott, M., Gunderson, C. W., Mateescu, E. M., Zhang, Z., Hwa, T. (2010). Interdependence of cell growth and gene expression: origins and consequences. <i>Science, 330</i>(6007), 1099-1102.</p>

Latest revision as of 03:57, 18 October 2014

Introduction

In most iGEM projects and synthetic biology research, complex genetic circuits are imported into bacteria to achieve variable functions. Such plenty of extra proteins, however, brings out serious burden to the host. Numerous research reported this burden profoundly influence the general physiological state of the cell reflected by growth rate variation in steady state conditions[1]. (Fig. 1) This negative effect might lead to serious result, for example, unexpected performance of genetic circuits which needs strict parameters to function, but rarely attracts enough attention. Precise description to evaluate the actual influence of this phenomenon is expected.

Figure 1. Ribosome distribution in different growth states. In the state of high growth rate, cell devotes most energy to ribosome synthesis (R) and other proteins (P). At the same time, devotion to unnecessary proteins (U) is limited. On the contrary, in the state of high expression rate of foreign proteins, growth is suppressed. Several kinds of proteins keep the same expression level in the two states (Q).

In addition, this year Peking strives for greater efficiency of killing algae, thus pursues maximum gross production of killing proteins. Gross production of proteins relies on both expression level of each cell and the number of cells, and generally the two items are usually contradictive, that is, increasing expression level may lade cells and slow down the growth rate, and eventually the population size. (Fig. 2) Therefore, it is necessary to establish a balance between them to optimize the whole production.

Figure 2: Diagram of factors that determine gross product of killing protein. Population and individual expression finally could both be linked to growth rate, representing the general state of cells.

In this part, aiming at the two questions, we focus on experimentally constructing and verifying the relationship between cell cost and growth rate, which is similar with previous reported results[2], and finally calculating the optimal expression level. Furthermore, we also explore the growth rate under different nutritional conditions, representing the different capability to afford protein burden. Combining these two parameters, we would establish a mathematical model based on partial differential equations to analysis the process of our project.(Fig. 3).

Figure 3: Overall killing process. Cyanobacteria are killed by E. coli and release contents, which can be exploited by E. coli for proliferation.

Gene Expression Effects

Considering the low toxicity of mRFP, a serial of high-copy plasmids containing mRFP under gradient intensity of promoters is transformed into E. coli, and the growth curve of different strains are characterized. (Fig. 4a) We use the fluorescence intensity provided by iGEM Registry BBa_J23100 to evaluate the different expression levels. According to our result, we successfully verify the empirical relationship between cell cost and growth rate. (Fig. 4b).

Figure 4. (a) Growth curves of E. coli carrying a series of burden plasmids. The growth rate decreases generally when carrying the increasing strength of plasmids from J23118 to J23101. (b) The relation between growth rate and fluorescence intensity which reflects the individual expression level, indicating linear correlation between them.
Figure 5. Growth curves of E. coli carrying a series of burden plasmids in lysed cyanobacteria culture. It exhibits similar effect with E. coli in LB media, which proving this compromise may also exist in natural condition.

Nutritional Condition

The nutritional condition is also a limitation on growth rate. We measured corresponding growth rate λ and the maximum environmental capacity NK under different concentration nutrient, realized by diluting the medium. It is shown that the growth rates in different nutrition condition follow the equations:

Combined the unnecessary gene expression and nutritional condition effects, we drive a phenomenological relationship:

The function α still needs to verified. Gradient diluted standard LB medium is used as medium to quantify the growth curve. (Fig. 6a) We can see the exponential relationship between the nutrition condition and growth rate λ.(Fig. 6)

Figure 6. (a) Growth curves of E. coli in diluted LB media. The growth rate generally corresponds to the nutritional condition. (b) A nearly linear relationship between logarithm of growth rate and relative dilution concentration.

Analytical Analysisl

Based on previous experiments and equations, the accumulated protein amount A could be represented by a multiplication between the current population of bacteria N(t) and expression level ϕ. The former is the integral of growth rate λ to time. The complete formula has the following form:

A=ϕ∫_0^t▒〖N(t)dt〗= Numerical simulation provides the extremum of this function in different nutritional condition. (Fig. 6)

Proliferation Model

In our design, almost all of nutrition comes from algae lysed by lysozyme. Thus the nutrition condition is related to the lysozyme production. Consider this relation, a proliferation model has been constructed to find a optimal expression in natural environment.

From result we can deduce that cyanobacteria are eliminated most quickly in a specific concentration, while too high or low expression level significantly dampens the killing efficiency (Fig. 7). Consequently we could choose an appropriate intensity of the lysozyme based on this model.

Figure 7.Mesh figure indicating that variation of cyanobacteria population in different expression level of lysozyme. The vertical axis represents the population and the two horizontal axes represent the concentration and time. Curves in moderate concentration are sharpen than them in the boundary, which means that an expression level corresponding to maximum of efficiency exists.

Discussion

In this part, we originally investigate the potential negative influence of cell physiological state on synthetic biology design and propose a method to quantitatively evaluate this effect based on growth rate. Actually, this phenomenon is not rare in experiments, for example, strains carrying high-copy plasmids usually has slower growth rate than that carrying low-copy plasmids in same growth condition. Unfavorable physiological state caused by excess burden influence on expression of promoters and proliferation rate, therefore might block the function of circuits relying on this key parameters. Our model provides a choice to describe this unknown effect. In process of network design, this factor would be considered a priori and thus be repressed, which enhance the robustness of circuits.

Moreover, similar with that in our project, industry which produces protein by engineered bacteria could also use this model to obtain maximum producing efficiency through adjusting expression intensity of target protein and nutrition condition of medium. At the time that accumulation of product needs to be controlled to prevent toxicity, it is a feasible measure to make engineered bacteria devote more resource into proliferation, and vice versa.

In general, this kind of questions should be paid more attention on, and our model provides a simple attempt to solve them. We hope that more sophisticated models would be proposed in the future, which would make the evaluation more precise and reliable.

References

[1] Scott, M., Hwa, T. (2011). Bacterial growth laws and their applications.Current opinion in biotechnology, 22(4), 559-565.

[2] Scott, M., Gunderson, C. W., Mateescu, E. M., Zhang, Z., Hwa, T. (2010). Interdependence of cell growth and gene expression: origins and consequences. Science, 330(6007), 1099-1102.