Team:NCTU Formosa/Safety

The orbital shaker incubator is widely used in microbiology labs, cell biology labs, etc. It provides a stationary temperature to cultivate bacteria and cells. Some incubator also have functions to maintain the humility level. In our lab, the incubator provides stationary temperature at 37 degrees Celsius, which is the optical temperature of E.coli growing, and 16 degrees Celsius for ligase working². In this year, our team was authorized to work with an non-pathogenic bacterial strain, the Escherichia coli DH5. The strain is regularly employed in research, industry and study. Biosafety Level 1 standard regulations were strictly followed while using these strains.

An autoclave is a pressure chamber used to sterilize equipment and supplies by subjecting them to high pressure saturated steam at 121 °C for around 15–20 minutes depending on the size of the load and the contents. The autoclave is used for the safety issue. When sterilizing, the pressure and temperature inside reached high level, forming superheat steam and high pressure which will kill cell and make proteins destroyed or denatured⁴.

In our lab, every consumables that may contact bacteria will be sterilized before and after use to guarantee the safety.

A laminar flow is an enclosed, ventilated laboratory workspace for safely working with materials contaminated with (or potentially contaminated with) pathogens requiring a defined biosafety level.we usually conduct experiments where our E.coli will expose, such as selecting single colony ⁷. We strictly rule that all of the researchers should conduct experiments carefully inside the laminar flow and sterilize his/her hands with alcohol solution(70%) before conducting experiments, all of us are familiar with the using method of Laminar flow.</p>

An analytical balance is a class of balance used in measuring small mass in the sub-milligram range. The measuring pan of an analytical balance is inside a transparent enclosure with doors so that dust can be collected well and so any air currents in the room do not affect the balance's accuracy.⁵ In our lab, we have two models of balance, one is accurate to 0.1 g, another is accurate to 0.1 mg.

In this system, Water is purified in a first step using unique Jetpore ion-exchange resin, synthetic activated carbon and UV lamp emitting at 185 and 254 nm to reach a resistivity of 18.2 MΩ.cm at 25 °C and a TOC value below 5 ppb, both monitored by advanced analytical techniques.⁶ The water purify system is used to produce ultrapure water, which is for experimental use in our lab.

The thermal cycler (also known as a thermocycler, PCR machine or DNA amplifier) is a laboratory apparatus that are most commonly used to amplify segments of DNA via the polymerase chain reaction (PCR). The function of thermal cycle is to provide the appropriate working temperature for some reactions, including many temperature-sensitive reactions such as restriction enzyme digestion or rapid diagnostics. The device has a thermal block with holes where tubes holding the reaction mixtures can be inserted. The cycler then raises and lowers the temperature of the block in discrete, pre-programmed steps, and time setting determines the time interval of every temperature³

Gel documentation system, also known as a gel image system or gel imager, is equipment widely used in molecular biology laboratories for the imaging and documentation of nucleic acid and protein suspended within polyacrylamide or agarose gels. These gels are typically stained with ethidium bromide or other fluorophores such as SYBR Green. Generally, a gel doc includes an ultraviolet (UV) light transilluminator, a hood or a darkroom to shield external light sources and protect the user from UV exposure, and a CCD camera for image capturing⁸.