Team:Hong Kong HKUST/pneumosensor/results/module one

From 2014.igem.org

Revision as of 14:53, 5 October 2014 by Jumnicole (Talk | contribs)


Pneumosensor Results

Detection Module

Overview

The two-component regulatory system in S. pneumoniae, consisting of the receptor ComD and its response regulator ComE was to be used in detecting the autoinducer molecule, competence-stimulating peptide (CSP) and so detect S. pneumoniae populations correspondingly.


Construct


Tag protein We engineered in a FLAG protein tag in the 3’ end of ComD by including the sequence in comD extraction primer.
Forward primer to extract comD to clone into PSB1C3: TCTGGAGAATTCGCGGCCGCTTCTAGATGGATTTATTTGGATTTGGGACGG [6’cap][20’ RFC10 prefix][25’ Streptoccocus pneumoniae/NCTC7465/comD]

3’ primer to extract comD with engineered FLAG tag gene sequence: GCCGGACTGCAGCGGCCGCTACTAGTATTATTACTTGTCGTCATCGTCTTTGTAGTCTCATTCAAATTCCCTCTTAAATCTAATGAT [6’ cap][21’ RFC10 suffix][6’ reverse complement stop codon][25’ reverse complement FLAG protein ][30 reverse complement Streptoccocus pneumoniae/NCTC7465/comD]

comE was extracted from pKHS-come kindly sent to us by ??. Extraction was done using the following primers:
Forward primer to extract comE to clone into pSB1C3: TCTGGAGAATTCGCGGCCGCTTCTAGATGAAAGTTTTAATTTTAGAAGATG
[6’ cap][20’ RFC10 prefix][25’ Streptoccocus pneumoniae/NCTC7465/comE]
Reverse primer to extract comE to clone into pSB1C3: GCCGGACTGCAGCGGCCGCTACTAGTATCACTTTTGAGATTTTTTCTCTAA
[6’ cap][21’ RFC10 suffix][24’reverse complement Streptoccocus pneumoniae/NCTC7465/comE]

come contained an illegal SpeI site, so we designed primers for site-directed mutagenesis:
Mutagenesis forward primer: CGCTATTATCGTCTTTATCACTAGCCGATCAGAGTTTGCGACTCTAAC

Mutagenesis reverse primer: GTTAGAGTCGCAAACTCTGATCGGCTAGTGATAAAGACGATAATAGCG

However, site-directed mutagenesis attempts were unsuccessful, so the gene was extracted in two parts using (i) come forward primer & mutagenesis reverse primer; (ii) come reverse primer & mutagenesis forward primer. The two fragments were then combined through Gibson Assembly.

ComX Generator construct (BBa_K1379006) and comW construct

Backbone pSB1C3 was used for ComX generator construct and comW construct. comX gene / comW gene was fused with BBa_K880005 which contains a constitutive promoter (J23100) and strong RBS (B0032). The purpose of this strong constitutive promoter and strong RBS is to unsure the large production of ComX and ComW protein throughout time. Then, a double terminator (B0015) is fused with the promoter, RBS, and ComX. BBa_K880005 and B0015 was obtained from 2014 iGEM distribution kit.

Construct using pSB1C3 backbone with only comX gene (BBa_K1379004), with comX gene and BBa_B0015 double terminator (BBa_K1379045) was also built.

Bacterial Strain
The bacterial strain of E.coli that were used is DH10B. Since this strain of E.Coli have clpXP degradation enzyme which target ComX for degradation, an excess amount of ComX protein are required to maintain enough amount of ComX for combox promoter induction.

comX and comW gene
comX gene and comW gene was cloned from NCTC 7465 E.Coli strain genomic DNA by PCR using Vent Polymerase.

comX Tag Protein
We engineered a C-myc protein tag in the 3’ ends of comX by including the sequence in comX extraction primer.

3’ primer to extract comX with engineered C-myc tag gene sequence:

GCCGGA CTGCAGCGGCCGCTACTAGTA TTATTA CAGATCCTCTTCTGAGATGAGTTTTTGTTC GTGGGTACGGATAGTAAACTCCTTAAACAC

[6’ Cap] [21’ SpeI and PstI restriction site] [6’ terminator sequence] [30’ C-myc protein] [30' reverse complementary of 3’ comX]

ComW Tag Protein
We engineered a FLAG protein tag in the 3’ ends of comW by including the sequence in comW extraction primer.

3’ primer to extract comW with engineered FLAG tag gene sequence:

GCCGGA CTGCAGCGGCCGCTACTAGTA TTATTA CTTGTCGTCATCGTCTTTGTAGTC ACAAGAAATAAAACCCCGATTCATTACCAATT

[6’ Cap] [21’ SpeI and PstI restriction site] [6’ terminator sequence] [24’ FLAG protein] [32' reverse complementary of 3’ comW]

PCelA (BBa_ K1379002) and Phelicase (BBa_ K1379003) construct

Backbone pSB1C3 was used for PCelA and Phelicase construct. PCelA / Phelicase gene was fused with BBa_E0240, which contains a medium RBS (BBa_B0032), GFP (BBa_E0040) and double terminator (BBa_B0015). The purpose of this GFP generator is to indicate the functionality of PCelA and Phelicase in the presence and absence of ComX protein. BBa_E0240 was obtained from 2014 iGEM distribution kit. The bacterial strain of E.coli used is DH10B.

PCelA / Phelicase gene
PCelA and Phelicase gene was cloned from the genomic DNA of E.Coli strain NCTC7465 by PCR using Vent Polymerase. The difference between these two promoters is the whole sequence of Phelicase was obtained from Wellcome Trust Sanger Institute, a British genomics and genetics research institute. (https://www.sanger.ac.uk/)

PcelA Forward primer: TTTCTGTCTAGAGTTGACCAAGGAAGACTATTTTGC

PcelA Reverse primer: GCCGGACTGCAGCGGCCGCTACTAGTAATTTTCTCCTCTCTTAGATTATTCGTAAGAGG

Phelicase Forward primer: TTTCTGTCTAGAGTGGACTTGGCCGTCCTCT

Phelicase Reverse primer: GCCGGACTGCAGCGGCCGCTACTAGTAGACGTTCTTCTTCTGTTAATTCATTCTCAG

Assembly and Characterization

Assembly comX and comW construct contain 3 parts that needs to be assembled: K880005 which contains constitutive promoter and RBS, comX engineered with C-myc tag / comW engineered with FLAG tag, and a double terminator in pSB1C3 backbone. Promoter, RBS, comX engineered with C-myc tag, and double terminator were combined using traditional digestion and ligation method. The ligation product was confirmed by digestion check and sequencing.

Combox construct also contains 3 parts that need to be assembled: PcelA/Phelicase promoter, BBa_E0240 which contains RBS, GFP and double terminator, and pSB1C3 backbone. All three parts were combined using traditional digestion and ligation method. The final ligation product was confirmed by digestion check and sequencing.

Characterization
RPU (Relative promoter unit) and leakage will be measured as a characterization of 100 base pairs combox promoter (PcelA), and 160 base pairs combox promoter (Phelicase). For combox promoter characterization, ComX generator construct which contain K880005, comX gene, and B0015, is ligated with PcelA / Phelicase construct which contain combox promoter and GFP generator. In order to characterize the two combox promoters, ComX generator-combox construct was migrated from pSB1C3 to pSB3K3. RPU are measured with J23100 Andersen family promoter as a reference promoter.


Home

Pneumosensor

Riboregulator

Human Practice

Team

WetLab

Achievement