"
Team:ETH Zurich/lab/chip
From 2014.igem.org
(→Mold Design) |
|||
| Line 9: | Line 9: | ||
===Mold Design=== | ===Mold Design=== | ||
| - | Our custom-made plates and molds were design using a 3D computer aided design | + | Our custom-made plates and molds were design using a common personal computer and a 3D computer aided design (CAD) software package that is freely available ([http://www.123dapp.com/design Autodesk123D Design]). The CAD models were exported as mesh files (.stl) to the 3D printer's software ([[http://www.123dapp.com/design MakerWare]). |
===3D-Printing and Rapid Prototyping=== | ===3D-Printing and Rapid Prototyping=== | ||
Revision as of 17:00, 26 August 2014
{{{1}}}
Millifluidic PDMS Chip
Overview
Our project is aiming for the biological implementation of cellular automata, so we have to find a way to create a regular grid of cells with a defined neighborhood as shown in the picture below. Therefore, we investigate the combination of additive manufacturing (3D-printing) and PDMS chip fabrication for applications in synthetic biology. This rapid prototyping approach should allow us to update our chips continuously according to new insights from modeling or the wet lab and to avoid more intricate photolitographic approaches, which generally require clean room access, relatively expensive raw materials, and in depth knowledge of etching techniques. As a result, we are convinced that the tinkering with 3D-printing for mold creation is more economical and perfectly in line with the do-it-yourself spirit of iGEM.
Mold Design
Our custom-made plates and molds were design using a common personal computer and a 3D computer aided design (CAD) software package that is freely available (Autodesk123D Design). The CAD models were exported as mesh files (.stl) to the 3D printer's software ([MakerWare).
3D-Printing and Rapid Prototyping
PDMS Chip Preparation
Time-Laps Movies
