Team:DTU-Denmark/Achievements/Medal fulfillings

From 2014.igem.org

(Difference between revisions)
Line 26: Line 26:
<div id="medals-bronze-div">
<div id="medals-bronze-div">
<h2>Bronze medal requirements</h2>
<h2>Bronze medal requirements</h2>
-
<b>The following 6 goals have been achieved or are expected to be fulfilled at the final Jamboree:</b>
+
<b>The following 6 goals have been achieved or are going to be fulfilled at the final Jamboree:</b>
<ol>
<ol>
<li>Team registration</li>
<li>Team registration</li>
-
         <ul><li>We are official registered as a team representing the Technical University of Denmark in the iGEM 2014 competition. Visit our official <a
+
         <ul><li>We are officially registered as a team representing the Technical University of Denmark in the iGEM 2014 competition. Visit our official <a
-
                       href="https://igem.org/Team.cgi" Target="_blank"> team page</a> for more info. </li></ul>
+
                       href="https://igem.org/Team.cgi" target="_blank"> team page</a> for more info. </li></ul>
<li>Complete Judging form.</li>
<li>Complete Judging form.</li>
-
         <ul><li>Our completed judging form can be found <a href="https://igem.org/2014_Judging_Form?id=1330">here</a></li></ul>
+
         <ul><li>Our completed judging form can be found <a href="https://igem.org/2014_Judging_Form?id=1330" target="_blank">here</a></li></ul>
<li>Team Wiki.</li>
<li>Team Wiki.</li>
-
         <ul><li>We developed this Wiki to communicate our project. Navigate around and discover how we have evolved the project in and outside the lab. </li></ul>   
+
         <ul><li>We created this Wiki to communicate our project. Navigate around and discover how we have evolved the project in and outside the lab. </li></ul>   
<li>Present a poster and a talk at the iGEM Jamboree.</li>
<li>Present a poster and a talk at the iGEM Jamboree.</li>
         <ul><li>We look very much forward to present our product of a half years hard work with a lot of experiences and fun. </li></ul>
         <ul><li>We look very much forward to present our product of a half years hard work with a lot of experiences and fun. </li></ul>

Revision as of 11:14, 17 October 2014

Since our team is signed up in the measurement track we have specific medal requirements to fulfill. These are listed below together with our contributions. Some of the requirements have not yet been fulfilled, e.g. presenting our poster. These requirements will be fulfilled at final jamboree.


Bronze medal requirements

The following 6 goals have been achieved or are going to be fulfilled at the final Jamboree:
  1. Team registration
    • We are officially registered as a team representing the Technical University of Denmark in the iGEM 2014 competition. Visit our official team page for more info.
  2. Complete Judging form.
    • Our completed judging form can be found here
  3. Team Wiki.
    • We created this Wiki to communicate our project. Navigate around and discover how we have evolved the project in and outside the lab.
  4. Present a poster and a talk at the iGEM Jamboree.
    • We look very much forward to present our product of a half years hard work with a lot of experiences and fun.
  5. Participate in the Measurement Interlab Study
    • As participants in the measurement track we have contributed to the interlab study, by transforming GFP expressed from different promoters into E. coli and measure fluorescence signal with BioLector and FACS.
  6. Document at least one new standard BioBrick Part central to your project
    • We have submitted two novel BioBricks essential for our project to the iGEM Registry. This includes the Spinach2.1 in pSB1C3 backbone with and without a terminator. In the submitted BioBrick we have introduced two point mutations in the Spinach2 to remove an internal SpeI restriction site from the original sequence, resulting in Spinach2.1. The parts have been validated by sequencing and demonstrated to be expressed and bind to the fluorophore DFHBI-1T in E. coli. These two parts are registered as BBa_K1330000 and BBa_K1330001 and they are listed at our parts wiki page.
    • Furthermore we intended to streamline the Anderson promoter library by transforming promoters formerly present in plasmid J61002 into the iGEM standard backbone pSB1C3. This includes the promoters J23105, J23110, J23112 and J23116, now registered as K1330002, K1330003, K1330004 and K1330005 respectively. This will be a great advantage for future iGEM teams working with the Anderson promoter Library.


Silver medal requirements

In addition to the bronze medal requirements the requirements for silver medal have been achieved as stated below.
  1. Experimentally validate that at least one new BioBrick Part works as expected:
    • The Spinach2 fragments has been transformed into E. coli. Original Spinach2 and Spinach2.1 containing two point mutations to remove an internal SpeI restriction site, have been demonstrated to fluoresce at equal levels. Spinach2.1 can be applied in our developed method for measuring promoter activity. The parts have been demonstrated to fluoresce only after addition of the fluorophore DFHBI-1T. Furthermore the fluorophore was proved not to cause significant fluorescence signal without the spinach. See our experimental results for more info. We have thereby validated that the novel BioBrick works as we expected, and thereby opened up for our developed new method to measure absolute promoter strength with the Spinach technology.
  2. Document the characterization of this part in the Registry.
    • The two Spinach2.1 BioBricks and the corresponding documentation can be found in the Registry with the entrances BBa_K1330000 and BBa_K1330001.
  3. Submit this new part to the iGEM Parts Registry
    • Our parts have been submitted 2014.09.30
  4. Articulate at least one question within ethics, sustainability, social justice, safety, security, or intellectual property rights etc, encountered by your team, and describe how your team considered the(se) question(s) within your project.
    • As team we participated in a workshop on ethics hosted by the UNIK_Copenhagen iGEM’14 team. This led to an essay dealing with the several questions on ethics within our project.
      • What ethical issues should be considered regarding our project and synthetic biology in general?
      • How can these issues be approached?
    • Furthermore we have been dealing with laboratory safety since we find that essential for a good project. We have chosen to make a guidance on how to maintain good laboratory safety. This is targeted towards our defined human practise target group (elite high school students) since they don’t have well developed safety routines yet.


Gold medal requirements

3 of the 4 Gold medal criteria have been achieved
  1. Demonstrate a substantial improvement over the state of the art in cost, efficiency, precision, resolution, and/or other relevant capabilities of your measurement technique.
    • Today promoter activity is measured with the use of GFP which entail several complications, including bleaching effect and uncertainty associated with measuring on protein level. The method developed through our project exterminate these issues by using the spinach RNA-aptamer expressed from the promoter of choice. This allows measurement performed at RNA level thereby eliminating several uncertainties faced when using GFP. With our experimental work and our developed PoPS calculator we have enabled a new way of measuring promoter activity on RNA-level with the use of Spinach.
  2. Increase the ease of accessibility and portability of methods to other laboratories of a new measurement technique of your choosing.
    • We have transformed Spinach2.1 into the standard iGEM backbone so it easily can be placed behind any optional promoter. Thereby making a easy, fast and standardized protocol to measure promoter strength on RNA level. With our calculator we have developed a fast and easy way to convert fluorescence signal into a absolute PoPS value for promoter activity.
  3. Help any registered iGEM team from another school or institution.
    • One of our first achievements was hosting a BioBrick workshop in May for the two other danish iGEM teams SDU-Denmark and UNIK Copenhagen. We shared our knowledge within USER cloning and arranged a programme covering 3 days of workshops with relevant presentations and lab introduction. Thereby helping other teams by giving them some skills, knowledge and techniques useful when developing a great iGEM project. It also served as a good way to start up the projects with the great opportunity for idea development and knowledge exchange among the teams.